Message ID | 20240430175834.33152-2-puranjay@kernel.org (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | riscv, bpf: Support per-CPU insn and inline bpf_get_smp_processor_id() | expand |
Context | Check | Description |
---|---|---|
conchuod/vmtest-fixes-PR | fail | merge-conflict |
On Tue, Apr 30, 2024 at 10:58 AM Puranjay Mohan <puranjay@kernel.org> wrote: > > Support an instruction for resolving absolute addresses of per-CPU > data from their per-CPU offsets. This instruction is internal-only and > users are not allowed to use them directly. They will only be used for > internal inlining optimizations for now between BPF verifier and BPF > JITs. > > RISC-V uses generic per-cpu implementation where the offsets for CPUs > are kept in an array called __per_cpu_offset[cpu_number]. RISCV stores > the address of the task_struct in TP register. The first element in > task_struct is struct thread_info, and we can get the cpu number by > reading from the TP register + offsetof(struct thread_info, cpu). > > Once we have the cpu number in a register we read the offset for that > cpu from address: &__per_cpu_offset + cpu_number << 3. Then we add this > offset to the destination register. > > To measure the improvement from this change, the benchmark in [1] was > used on Qemu: > > Before: > glob-arr-inc : 1.127 ± 0.013M/s > arr-inc : 1.121 ± 0.004M/s > hash-inc : 0.681 ± 0.052M/s > > After: > glob-arr-inc : 1.138 ± 0.011M/s > arr-inc : 1.366 ± 0.006M/s > hash-inc : 0.676 ± 0.001M/s > > [1] https://github.com/anakryiko/linux/commit/8dec900975ef > > Signed-off-by: Puranjay Mohan <puranjay@kernel.org> > --- > arch/riscv/net/bpf_jit_comp64.c | 24 ++++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > > diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c > index 15e482f2c657..99d7006f1420 100644 > --- a/arch/riscv/net/bpf_jit_comp64.c > +++ b/arch/riscv/net/bpf_jit_comp64.c > @@ -12,6 +12,7 @@ > #include <linux/stop_machine.h> > #include <asm/patch.h> > #include <asm/cfi.h> > +#include <asm/percpu.h> > #include "bpf_jit.h" > > #define RV_FENTRY_NINSNS 2 > @@ -1089,6 +1090,24 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx, > emit_or(RV_REG_T1, rd, RV_REG_T1, ctx); > emit_mv(rd, RV_REG_T1, ctx); > break; > + } else if (insn_is_mov_percpu_addr(insn)) { > + if (rd != rs) > + emit_mv(rd, rs, ctx); > +#ifdef CONFIG_SMP > + /* Load current CPU number in T1 */ > + emit_ld(RV_REG_T1, offsetof(struct thread_info, cpu), > + RV_REG_TP, ctx); > + /* << 3 because offsets are 8 bytes */ > + emit_slli(RV_REG_T1, RV_REG_T1, 3, ctx); > + /* Load address of __per_cpu_offset array in T2 */ > + emit_addr(RV_REG_T2, (u64)&__per_cpu_offset, extra_pass, ctx); > + /* Add offset of current CPU to __per_cpu_offset */ > + emit_add(RV_REG_T1, RV_REG_T2, RV_REG_T1, ctx); > + /* Load __per_cpu_offset[cpu] in T1 */ > + emit_ld(RV_REG_T1, 0, RV_REG_T1, ctx); > + /* Add the offset to Rd */ > + emit_add(rd, rd, RV_REG_T1, ctx); is this the right level of code indentation? > +#endif > } > if (imm == 1) { > /* Special mov32 for zext */ > @@ -2038,3 +2057,8 @@ bool bpf_jit_supports_arena(void) > { > return true; > } > + > +bool bpf_jit_supports_percpu_insn(void) > +{ > + return true; > +} > -- > 2.40.1 >
Andrii Nakryiko <andrii.nakryiko@gmail.com> writes: > On Tue, Apr 30, 2024 at 10:58 AM Puranjay Mohan <puranjay@kernel.org> wrote: >> >> Support an instruction for resolving absolute addresses of per-CPU >> data from their per-CPU offsets. This instruction is internal-only and >> users are not allowed to use them directly. They will only be used for >> internal inlining optimizations for now between BPF verifier and BPF >> JITs. >> >> RISC-V uses generic per-cpu implementation where the offsets for CPUs >> are kept in an array called __per_cpu_offset[cpu_number]. RISCV stores >> the address of the task_struct in TP register. The first element in >> task_struct is struct thread_info, and we can get the cpu number by >> reading from the TP register + offsetof(struct thread_info, cpu). >> >> Once we have the cpu number in a register we read the offset for that >> cpu from address: &__per_cpu_offset + cpu_number << 3. Then we add this >> offset to the destination register. >> >> To measure the improvement from this change, the benchmark in [1] was >> used on Qemu: >> >> Before: >> glob-arr-inc : 1.127 ± 0.013M/s >> arr-inc : 1.121 ± 0.004M/s >> hash-inc : 0.681 ± 0.052M/s >> >> After: >> glob-arr-inc : 1.138 ± 0.011M/s >> arr-inc : 1.366 ± 0.006M/s >> hash-inc : 0.676 ± 0.001M/s >> >> [1] https://github.com/anakryiko/linux/commit/8dec900975ef >> >> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> >> --- >> arch/riscv/net/bpf_jit_comp64.c | 24 ++++++++++++++++++++++++ >> 1 file changed, 24 insertions(+) >> >> diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c >> index 15e482f2c657..99d7006f1420 100644 >> --- a/arch/riscv/net/bpf_jit_comp64.c >> +++ b/arch/riscv/net/bpf_jit_comp64.c >> @@ -12,6 +12,7 @@ >> #include <linux/stop_machine.h> >> #include <asm/patch.h> >> #include <asm/cfi.h> >> +#include <asm/percpu.h> >> #include "bpf_jit.h" >> >> #define RV_FENTRY_NINSNS 2 >> @@ -1089,6 +1090,24 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx, >> emit_or(RV_REG_T1, rd, RV_REG_T1, ctx); >> emit_mv(rd, RV_REG_T1, ctx); >> break; >> + } else if (insn_is_mov_percpu_addr(insn)) { >> + if (rd != rs) >> + emit_mv(rd, rs, ctx); No biggie, but you did not fold this check into emit_mv(). >> +#ifdef CONFIG_SMP >> + /* Load current CPU number in T1 */ >> + emit_ld(RV_REG_T1, offsetof(struct thread_info, cpu), >> + RV_REG_TP, ctx); >> + /* << 3 because offsets are 8 bytes */ >> + emit_slli(RV_REG_T1, RV_REG_T1, 3, ctx); >> + /* Load address of __per_cpu_offset array in T2 */ >> + emit_addr(RV_REG_T2, (u64)&__per_cpu_offset, extra_pass, ctx); >> + /* Add offset of current CPU to __per_cpu_offset */ >> + emit_add(RV_REG_T1, RV_REG_T2, RV_REG_T1, ctx); >> + /* Load __per_cpu_offset[cpu] in T1 */ >> + emit_ld(RV_REG_T1, 0, RV_REG_T1, ctx); >> + /* Add the offset to Rd */ >> + emit_add(rd, rd, RV_REG_T1, ctx); > > is this the right level of code indentation? Looks wrong. When the indent is fixed, feel free to add: Acked-by: Björn Töpel <bjorn@kernel.org>
On Thu, May 2, 2024 at 6:18 PM Björn Töpel <bjorn@kernel.org> wrote: > > Andrii Nakryiko <andrii.nakryiko@gmail.com> writes: > > > On Tue, Apr 30, 2024 at 10:58 AM Puranjay Mohan <puranjay@kernel.org> wrote: > >> > >> Support an instruction for resolving absolute addresses of per-CPU > >> data from their per-CPU offsets. This instruction is internal-only and > >> users are not allowed to use them directly. They will only be used for > >> internal inlining optimizations for now between BPF verifier and BPF > >> JITs. > >> > >> RISC-V uses generic per-cpu implementation where the offsets for CPUs > >> are kept in an array called __per_cpu_offset[cpu_number]. RISCV stores > >> the address of the task_struct in TP register. The first element in > >> task_struct is struct thread_info, and we can get the cpu number by > >> reading from the TP register + offsetof(struct thread_info, cpu). > >> > >> Once we have the cpu number in a register we read the offset for that > >> cpu from address: &__per_cpu_offset + cpu_number << 3. Then we add this > >> offset to the destination register. > >> > >> To measure the improvement from this change, the benchmark in [1] was > >> used on Qemu: > >> > >> Before: > >> glob-arr-inc : 1.127 ± 0.013M/s > >> arr-inc : 1.121 ± 0.004M/s > >> hash-inc : 0.681 ± 0.052M/s > >> > >> After: > >> glob-arr-inc : 1.138 ± 0.011M/s > >> arr-inc : 1.366 ± 0.006M/s > >> hash-inc : 0.676 ± 0.001M/s > >> > >> [1] https://github.com/anakryiko/linux/commit/8dec900975ef > >> > >> Signed-off-by: Puranjay Mohan <puranjay@kernel.org> > >> --- > >> arch/riscv/net/bpf_jit_comp64.c | 24 ++++++++++++++++++++++++ > >> 1 file changed, 24 insertions(+) > >> > >> diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c > >> index 15e482f2c657..99d7006f1420 100644 > >> --- a/arch/riscv/net/bpf_jit_comp64.c > >> +++ b/arch/riscv/net/bpf_jit_comp64.c > >> @@ -12,6 +12,7 @@ > >> #include <linux/stop_machine.h> > >> #include <asm/patch.h> > >> #include <asm/cfi.h> > >> +#include <asm/percpu.h> > >> #include "bpf_jit.h" > >> > >> #define RV_FENTRY_NINSNS 2 > >> @@ -1089,6 +1090,24 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx, > >> emit_or(RV_REG_T1, rd, RV_REG_T1, ctx); > >> emit_mv(rd, RV_REG_T1, ctx); > >> break; > >> + } else if (insn_is_mov_percpu_addr(insn)) { > >> + if (rd != rs) > >> + emit_mv(rd, rs, ctx); > > No biggie, but you did not fold this check into emit_mv(). > > >> +#ifdef CONFIG_SMP > >> + /* Load current CPU number in T1 */ > >> + emit_ld(RV_REG_T1, offsetof(struct thread_info, cpu), > >> + RV_REG_TP, ctx); > >> + /* << 3 because offsets are 8 bytes */ > >> + emit_slli(RV_REG_T1, RV_REG_T1, 3, ctx); > >> + /* Load address of __per_cpu_offset array in T2 */ > >> + emit_addr(RV_REG_T2, (u64)&__per_cpu_offset, extra_pass, ctx); > >> + /* Add offset of current CPU to __per_cpu_offset */ > >> + emit_add(RV_REG_T1, RV_REG_T2, RV_REG_T1, ctx); > >> + /* Load __per_cpu_offset[cpu] in T1 */ > >> + emit_ld(RV_REG_T1, 0, RV_REG_T1, ctx); > >> + /* Add the offset to Rd */ > >> + emit_add(rd, rd, RV_REG_T1, ctx); > > > > is this the right level of code indentation? > > Looks wrong. > > When the indent is fixed, feel free to add: > > Acked-by: Björn Töpel <bjorn@kernel.org> I fixed the indent and sent it as part of: https://lore.kernel.org/all/20240502151854.9810-1-puranjay@kernel.org/ Also, for the emit_mv() thing, I wanted to verify if we are using that somewhere for zero-extension or something. So, I thought I would send a separate patch for it. Thanks, Puranjay
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c index 15e482f2c657..99d7006f1420 100644 --- a/arch/riscv/net/bpf_jit_comp64.c +++ b/arch/riscv/net/bpf_jit_comp64.c @@ -12,6 +12,7 @@ #include <linux/stop_machine.h> #include <asm/patch.h> #include <asm/cfi.h> +#include <asm/percpu.h> #include "bpf_jit.h" #define RV_FENTRY_NINSNS 2 @@ -1089,6 +1090,24 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx, emit_or(RV_REG_T1, rd, RV_REG_T1, ctx); emit_mv(rd, RV_REG_T1, ctx); break; + } else if (insn_is_mov_percpu_addr(insn)) { + if (rd != rs) + emit_mv(rd, rs, ctx); +#ifdef CONFIG_SMP + /* Load current CPU number in T1 */ + emit_ld(RV_REG_T1, offsetof(struct thread_info, cpu), + RV_REG_TP, ctx); + /* << 3 because offsets are 8 bytes */ + emit_slli(RV_REG_T1, RV_REG_T1, 3, ctx); + /* Load address of __per_cpu_offset array in T2 */ + emit_addr(RV_REG_T2, (u64)&__per_cpu_offset, extra_pass, ctx); + /* Add offset of current CPU to __per_cpu_offset */ + emit_add(RV_REG_T1, RV_REG_T2, RV_REG_T1, ctx); + /* Load __per_cpu_offset[cpu] in T1 */ + emit_ld(RV_REG_T1, 0, RV_REG_T1, ctx); + /* Add the offset to Rd */ + emit_add(rd, rd, RV_REG_T1, ctx); +#endif } if (imm == 1) { /* Special mov32 for zext */ @@ -2038,3 +2057,8 @@ bool bpf_jit_supports_arena(void) { return true; } + +bool bpf_jit_supports_percpu_insn(void) +{ + return true; +}
Support an instruction for resolving absolute addresses of per-CPU data from their per-CPU offsets. This instruction is internal-only and users are not allowed to use them directly. They will only be used for internal inlining optimizations for now between BPF verifier and BPF JITs. RISC-V uses generic per-cpu implementation where the offsets for CPUs are kept in an array called __per_cpu_offset[cpu_number]. RISCV stores the address of the task_struct in TP register. The first element in task_struct is struct thread_info, and we can get the cpu number by reading from the TP register + offsetof(struct thread_info, cpu). Once we have the cpu number in a register we read the offset for that cpu from address: &__per_cpu_offset + cpu_number << 3. Then we add this offset to the destination register. To measure the improvement from this change, the benchmark in [1] was used on Qemu: Before: glob-arr-inc : 1.127 ± 0.013M/s arr-inc : 1.121 ± 0.004M/s hash-inc : 0.681 ± 0.052M/s After: glob-arr-inc : 1.138 ± 0.011M/s arr-inc : 1.366 ± 0.006M/s hash-inc : 0.676 ± 0.001M/s [1] https://github.com/anakryiko/linux/commit/8dec900975ef Signed-off-by: Puranjay Mohan <puranjay@kernel.org> --- arch/riscv/net/bpf_jit_comp64.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)