Message ID | 20240419080303.2402184-1-heiko@sntech.de (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger | expand |
Hi Heiko, On 4/19/24 10:03, Heiko Stuebner wrote: > From: Heiko Stuebner <heiko.stuebner@cherry.de> > > The association of uart2 to the q7-uart pins is part of the module > itself and not the baseboard used. Therefore move the pinctrl over > to the tiger dtsi. > > Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Could have squeezed in a comment to state that this UART is the UART0 signals on Q7 because I often have to reopen the schematics/carrierboard DTS to remember which uart controller of which SoM is used for the debug console :) In any case, Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Thanks, Quentin
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts index d6e30d5697bd..ce38ebda5fd5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts @@ -269,7 +269,6 @@ &u2phy3_host { }; &uart2 { - pinctrl-0 = <&uart2m2_xfer>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi index 78f5bbddabba..48a3cbca38d0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi @@ -711,6 +711,10 @@ &tsadc { status = "okay"; }; +&uart2 { + pinctrl-0 = <&uart2m2_xfer>; +}; + /* Mule-ATtiny UPDI */ &uart4 { pinctrl-0 = <&uart4m2_xfer>;