| Message ID | 1408550219-19825-1-git-send-email-soren.brinkmann@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/20/2014 05:56 PM, Soren Brinkmann wrote: > The used PHYs should be qualified as 'rgmii-id' instead of just 'rgmii'. > For the Zed board this seems to make a difference between working and > broken Ethernet. > > Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> > --- > arch/arm/boot/dts/zynq-zc702.dts | 2 +- > arch/arm/boot/dts/zynq-zc706.dts | 2 +- > arch/arm/boot/dts/zynq-zed.dts | 2 +- > 3 files changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts > index 835c3089c61c..30bcfe20f0bc 100644 > --- a/arch/arm/boot/dts/zynq-zc702.dts > +++ b/arch/arm/boot/dts/zynq-zc702.dts > @@ -35,7 +35,7 @@ > > &gem0 { > status = "okay"; > - phy-mode = "rgmii"; > + phy-mode = "rgmii-id"; > }; > > &i2c0 { > diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts > index 4cc9913078cd..3d9cb023e158 100644 > --- a/arch/arm/boot/dts/zynq-zc706.dts > +++ b/arch/arm/boot/dts/zynq-zc706.dts > @@ -32,7 +32,7 @@ > > &gem0 { > status = "okay"; > - phy-mode = "rgmii"; > + phy-mode = "rgmii-id"; > }; > > &i2c0 { > diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts > index 82d7ef1a9a9c..42deb1b7dbc8 100644 > --- a/arch/arm/boot/dts/zynq-zed.dts > +++ b/arch/arm/boot/dts/zynq-zed.dts > @@ -32,7 +32,7 @@ > > &gem0 { > status = "okay"; > - phy-mode = "rgmii"; > + phy-mode = "rgmii-id"; > }; > > &sdhci0 { > Applied. M
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 835c3089c61c..30bcfe20f0bc 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -35,7 +35,7 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 4cc9913078cd..3d9cb023e158 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -32,7 +32,7 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &i2c0 { diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 82d7ef1a9a9c..42deb1b7dbc8 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -32,7 +32,7 @@ &gem0 { status = "okay"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; }; &sdhci0 {
The used PHYs should be qualified as 'rgmii-id' instead of just 'rgmii'. For the Zed board this seems to make a difference between working and broken Ethernet. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> --- arch/arm/boot/dts/zynq-zc702.dts | 2 +- arch/arm/boot/dts/zynq-zc706.dts | 2 +- arch/arm/boot/dts/zynq-zed.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)