| Message ID | 1408727539-15996-1-git-send-email-dmurphy@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Aug 22, 2014 at 12:12:19PM -0500, Dan Murphy wrote: > Update the drv260x dt binding document: > - Change the node name to the devices function not the > device name. > - Add vbat-supply to the example. > - Fix indentation of the example. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> > --- > > v2 - Address comments on indentation, node declaration, add vbat-supply, > removed description as it did not make sense - https://patchwork.kernel.org/patch/4765141/ > > .../devicetree/bindings/input/ti,drv260x.txt | 23 ++++++++++---------- > 1 file changed, 11 insertions(+), 12 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt > index a9c8519..ee09c8f 100644 > --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt > +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt > @@ -1,6 +1,4 @@ > -Texas Instruments - drv260x Haptics driver family > - > -The drv260x family serial control bus communicates through I2C protocols > +* Texas Instruments - drv260x Haptics driver family > > Required properties: > - compatible - One of: > @@ -37,15 +35,16 @@ Optional properties: > 3.2 v. > Example: > > -drv2605l: drv2605l@5a { > - compatible = "ti,drv2605l"; > - reg = <0x5a>; > - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > - mode = <DRV260X_LRA_MODE>; > - library-sel = <DRV260X_LIB_LRA>; > - vib-rated-mv = <3200>; > - vib-overdriver-mv = <3200>; > -}; > +haptics: haptics@5a { > + compatible = "ti,drv2605l"; > + reg = <0x5a>; > + vbat-supply = <&vbat>; > + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; > + mode = <DRV260X_LRA_MODE>; > + library-sel = <DRV260X_LIB_LRA>; > + vib-rated-mv = <3200>; > + vib-overdriver-mv = <3200>; > +} > > For more product information please see the link below: > http://www.ti.com/product/drv2605 > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/
On Fri, Aug 22, 2014 at 12:16:41PM -0500, Felipe Balbi wrote: > On Fri, Aug 22, 2014 at 12:12:19PM -0500, Dan Murphy wrote: > > Update the drv260x dt binding document: > > - Change the node name to the devices function not the > > device name. > > - Add vbat-supply to the example. > > - Fix indentation of the example. > > > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > > Reviewed-by: Felipe Balbi <balbi@ti.com> Applied, thank you.
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt index a9c8519..ee09c8f 100644 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ b/Documentation/devicetree/bindings/input/ti,drv260x.txt @@ -1,6 +1,4 @@ -Texas Instruments - drv260x Haptics driver family - -The drv260x family serial control bus communicates through I2C protocols +* Texas Instruments - drv260x Haptics driver family Required properties: - compatible - One of: @@ -37,15 +35,16 @@ Optional properties: 3.2 v. Example: -drv2605l: drv2605l@5a { - compatible = "ti,drv2605l"; - reg = <0x5a>; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mode = <DRV260X_LRA_MODE>; - library-sel = <DRV260X_LIB_LRA>; - vib-rated-mv = <3200>; - vib-overdriver-mv = <3200>; -}; +haptics: haptics@5a { + compatible = "ti,drv2605l"; + reg = <0x5a>; + vbat-supply = <&vbat>; + enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; + mode = <DRV260X_LRA_MODE>; + library-sel = <DRV260X_LIB_LRA>; + vib-rated-mv = <3200>; + vib-overdriver-mv = <3200>; +} For more product information please see the link below: http://www.ti.com/product/drv2605
Update the drv260x dt binding document: - Change the node name to the devices function not the device name. - Add vbat-supply to the example. - Fix indentation of the example. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v2 - Address comments on indentation, node declaration, add vbat-supply, removed description as it did not make sense - https://patchwork.kernel.org/patch/4765141/ .../devicetree/bindings/input/ti,drv260x.txt | 23 ++++++++++---------- 1 file changed, 11 insertions(+), 12 deletions(-)