| Message ID | cbf0902cd98332bc0218d84fd055b42fab3ea3b2.1408719375.git.marcel@ziswiler.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/22/2014 09:06 AM, Marcel Ziswiler wrote: > Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised > that the current device tree source includes for our modules only > happen to work due to referencing the on-carrier 5v0 supply from USB > which is not at all available on-module. The modules actually contain > TPS60150 charge pumps to generate the PMIC required 5 volts from the > one and only 3.3 volt module supply. This patch fixes this. I've forwarded this to the ARM SoC maintainers as a fix for v3.17.
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 8adaa78..a5446cb 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -423,7 +423,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -674,5 +674,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index bf16f8e..c4ed1be 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -201,7 +201,7 @@ vcc4-supply = <&sys_3v3_reg>; vcc5-supply = <&sys_3v3_reg>; vcc6-supply = <&vio_reg>; - vcc7-supply = <&sys_5v0_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; vccio-supply = <&sys_3v3_reg>; regulators { @@ -373,5 +373,14 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; };
Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> --- arch/arm/boot/dts/tegra30-apalis.dtsi | 11 ++++++++++- arch/arm/boot/dts/tegra30-colibri.dtsi | 11 ++++++++++- 2 files changed, 20 insertions(+), 2 deletions(-)