diff mbox

[v3,5/6] ARM: dts: qcom: Add PM8941 and PM8841 pinctrl nodes

Message ID 1407771634-14946-6-git-send-email-iivanov@mm-sol.com (mailing list archive)
State New, archived
Headers show

Commit Message

Ivan T. Ivanov Aug. 11, 2014, 3:40 p.m. UTC 
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

Add nodes for PM8941 and PM8841 GPIO and MPP PMIC subfunctions.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Pramod Gurav Aug. 14, 2014, 7:33 a.m. UTC | #1 
Hi Ivan,
This patch fail to apply on linux-next Tree. Probably because this is
based on Stanimir's older patch series "Support for Qualcomm QPNP
PMIC's". He has posted v4 of them on which it fails to apply. Am I correct?

Thanks
Pramod

On Monday 11 August 2014 09:10 PM, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
> 
> Add nodes for PM8941 and PM8841 GPIO and MPP PMIC subfunctions.
> 
> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> ---
>  arch/arm/boot/dts/qcom-msm8974.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index c7ae7ba..3967797 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -267,6 +267,31 @@
>  					reg-names = "rtc", "alarm";
>  					interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  				};
> +
> +				pm8941_gpios: gpios@c000 {
> +					compatible = "qcom,pm8941-gpio";
> +					reg = <0xc000>;
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					interrupts = <0 0xc0 0 0>, <0 0xc1 0 0>, <0 0xc2 0 0>, <0 0xc3 0 0>,
> +						     <0 0xc4 0 0>, <0 0xc5 0 0>, <0 0xc6 0 0>, <0 0xc7 0 0>,
> +						     <0 0xc8 0 0>, <0 0xc9 0 0>, <0 0xca 0 0>, <0 0xcb 0 0>,
> +						     <0 0xcc 0 0>, <0 0xcd 0 0>, <0 0xce 0 0>, <0 0xcf 0 0>,
> +						     <0 0xd0 0 0>, <0 0xd1 0 0>, <0 0xd2 0 0>, <0 0xd3 0 0>,
> +						     <0 0xd4 0 0>, <0 0xd5 0 0>, <0 0xd6 0 0>, <0 0xd7 0 0>,
> +						     <0 0xd8 0 0>, <0 0xd9 0 0>, <0 0xda 0 0>, <0 0xdb 0 0>,
> +						     <0 0xdc 0 0>, <0 0xdd 0 0>, <0 0xde 0 0>, <0 0xdf 0 0>,
> +						     <0 0xe0 0 0>, <0 0xe1 0 0>, <0 0xe2 0 0>, <0 0xe3 0 0>;
> +				};
> +
> +				pm8941_mpps: mpps@a000 {
> +					compatible = "qcom,pm8941-mpp";
> +					reg = <0xa000>;
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					interrupts = <0 0xa0 0 0>, <0 0xa1 0 0>, <0 0xa2 0 0>, <0 0xa3 0 0>,
> +						     <0 0xa4 0 0>, <0 0xa5 0 0>, <0 0xa6 0 0>, <0 0xa7 0 0>;
> +				};
>  			};
>  
>  			usid1: pm8941@1 {
> @@ -281,6 +306,14 @@
>  				reg = <0x4 SPMI_USID>;
>  				#address-cells = <1>;
>  				#size-cells = <0>;
> +
> +				pm8841_mpps: mpps@a000 {
> +					compatible = "qcom,pm8841-mpp";
> +					reg = <0xa000>;
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
> +				};
>  			};
>  
>  			usid5: pm8841@5 {
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ivan T. Ivanov Aug. 25, 2014, 2:06 p.m. UTC | #2 
On Thu, 2014-08-14 at 13:03 +0530, Pramod Gurav wrote:
> Hi Ivan,
> This patch fail to apply on linux-next Tree. Probably because this is
> based on Stanimir's older patch series "Support for Qualcomm QPNP
> PMIC's". He has posted v4 of them on which it fails to apply. Am I correct?

Right, sorry about that. I should clearly stated that this is based on Stan's patches.

Regards,
Ivan

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index c7ae7ba..3967797 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -267,6 +267,31 @@ 
 					reg-names = "rtc", "alarm";
 					interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 				};
+
+				pm8941_gpios: gpios@c000 {
+					compatible = "qcom,pm8941-gpio";
+					reg = <0xc000>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupts = <0 0xc0 0 0>, <0 0xc1 0 0>, <0 0xc2 0 0>, <0 0xc3 0 0>,
+						     <0 0xc4 0 0>, <0 0xc5 0 0>, <0 0xc6 0 0>, <0 0xc7 0 0>,
+						     <0 0xc8 0 0>, <0 0xc9 0 0>, <0 0xca 0 0>, <0 0xcb 0 0>,
+						     <0 0xcc 0 0>, <0 0xcd 0 0>, <0 0xce 0 0>, <0 0xcf 0 0>,
+						     <0 0xd0 0 0>, <0 0xd1 0 0>, <0 0xd2 0 0>, <0 0xd3 0 0>,
+						     <0 0xd4 0 0>, <0 0xd5 0 0>, <0 0xd6 0 0>, <0 0xd7 0 0>,
+						     <0 0xd8 0 0>, <0 0xd9 0 0>, <0 0xda 0 0>, <0 0xdb 0 0>,
+						     <0 0xdc 0 0>, <0 0xdd 0 0>, <0 0xde 0 0>, <0 0xdf 0 0>,
+						     <0 0xe0 0 0>, <0 0xe1 0 0>, <0 0xe2 0 0>, <0 0xe3 0 0>;
+				};
+
+				pm8941_mpps: mpps@a000 {
+					compatible = "qcom,pm8941-mpp";
+					reg = <0xa000>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupts = <0 0xa0 0 0>, <0 0xa1 0 0>, <0 0xa2 0 0>, <0 0xa3 0 0>,
+						     <0 0xa4 0 0>, <0 0xa5 0 0>, <0 0xa6 0 0>, <0 0xa7 0 0>;
+				};
 			};
 
 			usid1: pm8941@1 {
@@ -281,6 +306,14 @@ 
 				reg = <0x4 SPMI_USID>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+
+				pm8841_mpps: mpps@a000 {
+					compatible = "qcom,pm8841-mpp";
+					reg = <0xa000>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
+				};
 			};
 
 			usid5: pm8841@5 {