@@ -185,7 +185,7 @@ static unsigned int convert_format(snd_pcm_format_t snd_format)
case SNDRV_PCM_FORMAT_FLOAT_LE:
return SRC_SF_F32;
default:
- pr_err("ctxfi: not recognized snd format is %d \n",
+ pr_err("ctxfi: not recognized snd format is %d\n",
snd_format);
return SRC_SF_S16;
}
@@ -1282,8 +1282,7 @@ static int atc_identify_card(struct ct_atc *atc, unsigned int ssid)
p = snd_pci_quirk_lookup_id(vendor_id, device_id, list);
if (p) {
if (p->value < 0) {
- pr_err("ctxfi: "
- "Device %04x:%04x is black-listed\n",
+ pr_err("ctxfi: Device %04x:%04x is black-listed\n",
vendor_id, device_id);
return -ENOENT;
}
@@ -1315,8 +1314,7 @@ int ct_atc_create_alsa_devs(struct ct_atc *atc)
err = alsa_dev_funcs[i].create(atc, i,
alsa_dev_funcs[i].public_name);
if (err) {
- pr_err("ctxfi: "
- "Creating alsa device %d failed!\n", i);
+ pr_err("ctxfi: Creating alsa device %d failed!\n", i);
return err;
}
}
@@ -1351,8 +1349,7 @@ static int atc_create_hw_devs(struct ct_atc *atc)
err = rsc_mgr_funcs[i].create(atc->hw, &atc->rsc_mgrs[i]);
if (err) {
- pr_err("ctxfi: "
- "Failed to create rsc_mgr %d!!!\n", i);
+ pr_err("ctxfi: Failed to create rsc_mgr %d!!!\n", i);
return err;
}
}
@@ -1399,8 +1396,8 @@ static int atc_get_resources(struct ct_atc *atc)
err = daio_mgr->get_daio(daio_mgr, &da_desc,
(struct daio **)&atc->daios[i]);
if (err) {
- pr_err("ctxfi: Failed to get DAIO "
- "resource %d!!!\n", i);
+ pr_err("ctxfi: Failed to get DAIO resource %d!!!\n",
+ i);
return err;
}
atc->n_daio++;
@@ -1603,8 +1600,7 @@ static int atc_resume(struct ct_atc *atc)
/* Do hardware resume. */
err = atc_hw_resume(atc);
if (err < 0) {
- pr_err("ctxfi: pci_enable_device failed, "
- "disabling device\n");
+ pr_err("ctxfi: pci_enable_device failed, disabling device\n");
snd_card_disconnect(atc->card);
return err;
}
@@ -1911,8 +1911,7 @@ static int hw_card_start(struct hw *hw)
/* Set DMA transfer mask */
if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
- pr_err("architecture does not support PCI "
- "busmaster DMA with mask 0x%llx\n",
+ pr_err("architecture does not support PCI busmaster DMA with mask 0x%llx\n",
CT_XFI_DMA_MASK);
err = -ENXIO;
goto error1;
@@ -1246,8 +1246,7 @@ static int hw_trn_init(struct hw *hw, const struct trn_conf *info)
/* Set up device page table */
if ((~0UL) == info->vm_pgt_phys) {
- pr_alert("ctxfi: "
- "Wrong device page table page address!!!\n");
+ pr_alert("ctxfi: Wrong device page table page address!!!\n");
return -1;
}
@@ -1890,8 +1889,8 @@ static int hw_adc_init(struct hw *hw, const struct adc_conf *info)
hw20k2_i2c_write(hw, MAKE_WM8775_ADDR(WM8775_MMC, 0x0A),
MAKE_WM8775_DATA(0x0A));
} else {
- pr_alert("ctxfi: Invalid master sampling "
- "rate (msr %d)!!!\n", info->msr);
+ pr_alert("ctxfi: Invalid master sampling rate (msr %d)!!!\n",
+ info->msr);
err = -EINVAL;
goto error;
}
@@ -2034,8 +2033,8 @@ static int hw_card_start(struct hw *hw)
/* Set DMA transfer mask */
if (pci_set_dma_mask(pci, CT_XFI_DMA_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, CT_XFI_DMA_MASK) < 0) {
- pr_err("ctxfi: architecture does not support PCI "
- "busmaster DMA with mask 0x%llx\n", CT_XFI_DMA_MASK);
+ pr_err("ctxfi: architecture does not support PCI busmaster DMA with mask 0x%llx\n",
+ CT_XFI_DMA_MASK);
err = -ENXIO;
goto error1;
}
@@ -854,8 +854,7 @@ static int ct_mixer_get_resources(struct ct_mixer *mixer)
for (i = 0; i < (NUM_CT_SUMS * CHN_NUM); i++) {
err = sum_mgr->get_sum(sum_mgr, &sum_desc, &sum);
if (err) {
- pr_err("ctxfi:Failed to get sum resources for "
- "front output!\n");
+ pr_err("ctxfi:Failed to get sum resources for front output!\n");
break;
}
mixer->sums[i] = sum;
@@ -869,8 +868,7 @@ static int ct_mixer_get_resources(struct ct_mixer *mixer)
for (i = 0; i < (NUM_CT_AMIXERS * CHN_NUM); i++) {
err = amixer_mgr->get_amixer(amixer_mgr, &am_desc, &amixer);
if (err) {
- pr_err("ctxfi:Failed to get amixer resources "
- "for mixer obj!\n");
+ pr_err("ctxfi:Failed to get amixer resources for mixer obj!\n");
break;
}
mixer->amixers[i] = amixer;
@@ -162,14 +162,12 @@ int rsc_init(struct rsc *rsc, u32 idx, enum RSCTYP type, u32 msr, void *hw)
case DAIO:
break;
default:
- pr_err(
- "ctxfi: Invalid resource type value %d!\n", type);
+ pr_err("ctxfi: Invalid resource type value %d!\n", type);
return -EINVAL;
}
if (err) {
- pr_err(
- "ctxfi: Failed to get resource control block!\n");
+ pr_err("ctxfi: Failed to get resource control block!\n");
return err;
}
@@ -192,8 +190,8 @@ int rsc_uninit(struct rsc *rsc)
case DAIO:
break;
default:
- pr_err("ctxfi: "
- "Invalid resource type value %d!\n", rsc->type);
+ pr_err("ctxfi: Invalid resource type value %d!\n",
+ rsc->type);
break;
}
@@ -235,15 +233,13 @@ int rsc_mgr_init(struct rsc_mgr *mgr, enum RSCTYP type,
case SUM:
break;
default:
- pr_err(
- "ctxfi: Invalid resource type value %d!\n", type);
+ pr_err("ctxfi: Invalid resource type value %d!\n", type);
err = -EINVAL;
goto error;
}
if (err) {
- pr_err(
- "ctxfi: Failed to get manager control block!\n");
+ pr_err("ctxfi: Failed to get manager control block!\n");
goto error;
}
@@ -286,8 +282,8 @@ int rsc_mgr_uninit(struct rsc_mgr *mgr)
case SUM:
break;
default:
- pr_err("ctxfi: "
- "Invalid resource type value %d!\n", mgr->type);
+ pr_err("ctxfi: Invalid resource type value %d!\n",
+ mgr->type);
break;
}
@@ -36,8 +36,7 @@ get_vm_block(struct ct_vm *vm, unsigned int size)
size = CT_PAGE_ALIGN(size);
if (size > vm->size) {
- pr_err("ctxfi: Fail! No sufficient device virtual "
- "memory space available!\n");
+ pr_err("ctxfi: Fail! No sufficient device virtual memory space available!\n");
return NULL;
}
@@ -132,8 +131,7 @@ ct_vm_map(struct ct_vm *vm, struct snd_pcm_substream *substream, int size)
block = get_vm_block(vm, size);
if (block == NULL) {
- pr_err("ctxfi: No virtual memory block that is big "
- "enough to allocate!\n");
+ pr_err("ctxfi: No virtual memory block that is big enough to allocate!\n");
return NULL;
}
@@ -78,15 +78,13 @@ ct_card_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
if ((reference_rate != 48000) && (reference_rate != 44100)) {
pr_err("ctxfi: Invalid reference_rate value %u!!!\n",
reference_rate);
- pr_err("ctxfi: The valid values for reference_rate "
- "are 48000 and 44100, Value 48000 is assumed.\n");
+ pr_err("ctxfi: The valid values for reference_rate are 48000 and 44100, Value 48000 is assumed.\n");
reference_rate = 48000;
}
if ((multiple != 1) && (multiple != 2) && (multiple != 4)) {
pr_err("ctxfi: Invalid multiple value %u!!!\n",
multiple);
- pr_err("ctxfi: The valid values for multiple are "
- "1, 2 and 4, Value 2 is assumed.\n");
+ pr_err("ctxfi: The valid values for multiple are 1, 2 and 4, Value 2 is assumed.\n");
multiple = 2;
}
err = ct_atc_create(card, pci, reference_rate, multiple,
fixed broken user visible strings Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> --- I am not exactly sure about the patch as some lines after fixing has crossed the limit of 80 characters. But the coding style says : "never break user-visible strings such as printk messages, because that breaks the ability to grep for them" sound/pci/ctxfi/ctatc.c | 18 +++++++----------- sound/pci/ctxfi/cthw20k1.c | 3 +-- sound/pci/ctxfi/cthw20k2.c | 11 +++++------ sound/pci/ctxfi/ctmixer.c | 6 ++---- sound/pci/ctxfi/ctresource.c | 20 ++++++++------------ sound/pci/ctxfi/ctvmem.c | 6 ++---- sound/pci/ctxfi/xfi.c | 6 ++---- 7 files changed, 27 insertions(+), 43 deletions(-)