diff mbox

gpio: pxa: Documentation: provide example bindings for PXA3xx

Message ID 1408009224-15838-1-git-send-email-zonque@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Daniel Mack Aug. 14, 2014, 9:40 a.m. UTC 
Add another example to describe bindings that work for PXA3xx boards.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

Comments

Linus Walleij Aug. 29, 2014, 6:21 a.m. UTC | #1 
On Thu, Aug 14, 2014 at 11:40 AM, Daniel Mack <zonque@gmail.com> wrote:

> Add another example to describe bindings that work for PXA3xx boards.
>
> Signed-off-by: Daniel Mack <zonque@gmail.com>

Patch applied.

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
index 6641626..b2afdb2 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -19,7 +19,7 @@  Required properties:
 - gpio-controller : Marks the device node as a gpio controller.
 - #gpio-cells : Should be one.  It is the pin number.
 
-Example:
+Example for a MMP platform:
 
 	gpio: gpio@d4019000 {
 		compatible = "marvell,mmp-gpio";
@@ -32,6 +32,19 @@  Example:
 		#interrupt-cells = <1>;
       };
 
+Example for a PXA3xx platform:
+
+	gpio: gpio@40e00000 {
+		compatible = "intel,pxa3xx-gpio";
+		reg = <0x40e00000 0x10000>;
+		interrupt-names = "gpio0", "gpio1", "gpio_mux";
+		interrupts = <8 9 10>;
+		gpio-controller;
+		#gpio-cells = <0x2>;
+		interrupt-controller;
+		#interrupt-cells = <0x2>;
+	};
+
 * Marvell Orion GPIO Controller
 
 Required properties: