| Message ID | 1410469741-11634-3-git-send-email-Minghuan.Lian@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Thu, 2014-09-11 at 21:09 +0000, Minghuan Lian wrote: > Add support for Freescale Layerscape PCIe controller. This driver > re-uses the designware core code. > > Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> > --- > Change log: > v2: > 1. Add pcie-scfg to link scfg device node and remove "fsl, ls-pcie" compatible > 2. Use regmap API to access scfg. > 3. remove ls1021 PCI device ID. > 4. remove unused irq pme_irq and ls_pcie_list. > 5. Do not set scfg bit reverse mode > > .../devicetree/bindings/pci/layerscape-pci.txt | 45 ++++ > drivers/pci/host/Kconfig | 8 + > drivers/pci/host/Makefile | 1 + > drivers/pci/host/pci-layerscape.c | 278 +++++++++++++++++++++ > 4 files changed, 332 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt > create mode 100644 drivers/pci/host/pci-layerscape.c > > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > new file mode 100644 > index 0000000..1a5dbd8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > @@ -0,0 +1,45 @@ > +Freescale Layerscape PCIe controller > + > +This PCIe host controller is based on the Synopsis Designware PCIe IP > +and thus inherits all the common properties defined in designware-pcie.txt. > + > +Required properties: > +- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" > +- reg: base addresses and lengths of the PCIe controller > +- interrupts: A list of interrupt outputs of the controller. Must contain an > + entry for each entry in the interrupt-names property. > +- interrupt-names: Must include the following entries: > + "intr": The interrupt that is asserted for controller interrupts > + "msi": The interrupt that is asserted when an MSI is received > + "pme": The interrupt that is asserted when PME state changes > +- pcie-scfg: Must include two entries. fsl,pcie-scfg > + The first entry must be a link to the SCFG device node > + The second entry must be '0' or '1' based on physical PCIe controller index. > + used to get SCFG PEXN registers > + > +Example: > + > + pcie@3400000 { > + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; Can we rely on the config space vendor/device ID instead of hardcoding the SoC here? > + reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ > + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ > + reg-names = "regs", "config"; > + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ > + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */ > + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ > + interrupt-names = "intr", "msi", "pme"; > + pcie-scfg = <&scfg 0>; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + num-lanes = <4>; > + bus-range = <0x00 0xff>; > + ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000 /* downstream I/O */ > + 0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */ Are these ranges hardcoded in the SoC, or are they the result of iATU settings? If the latter, who configures it and why no prefetchable region? > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, > + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, > + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, > + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; > + }; > diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > index 34134d6..c826949 100644 > --- a/drivers/pci/host/Kconfig > +++ b/drivers/pci/host/Kconfig > @@ -82,4 +82,12 @@ config PCIE_XILINX > Say 'Y' here if you want kernel to support the Xilinx AXI PCIe > Host Bridge driver. > > +config PCI_LAYERSCAPE > + bool "Freescale Layerscape PCIe controller" > + depends on SOC_LS1021A > + select PCIE_DW > + select MFD_SYSCON > + help > + Say Y here if you want PCIe controller support on Layerscape SoCs. Why does it depend on this particular SoC? Is the same PCIe controller going to be used on other Layerscape chips? > +static irqreturn_t ls_pcie_msi_irq_handler(int irq, void *data) > +{ > + struct pcie_port *pp = data; > + struct ls_pcie *pcie = to_ls_pcie(pp); > + unsigned int msi_irq; > + > + /* clear the interrupt */ > + regmap_write(pcie->scfg, SCFG_SPIMSICLRCR, > + MSI_LS1021A_DATA(pcie->index)); > + > + msi_irq = irq_find_mapping(pp->irq_domain, 0); > + if (msi_irq) > + generic_handle_irq(msi_irq); > + else > + /* > + * that's weird who triggered this? > + * just clear it > + */ > + dev_info(pcie->dev, "unexpected MSI\n"); > + > + return IRQ_HANDLED; > +} > + Why are you returning IRQ_HANDLED in the "unexpected MSI" case? -Scott -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Scott, Please see my comments inline. On 2014?09?11? 21:24, Scott Wood wrote: > On Thu, 2014-09-11 at 21:09 +0000, Minghuan Lian wrote: >> Add support for Freescale Layerscape PCIe controller. This driver >> re-uses the designware core code. >> >> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> >> --- >> Change log: >> v2: >> 1. Add pcie-scfg to link scfg device node and remove "fsl, ls-pcie" compatible >> 2. Use regmap API to access scfg. >> 3. remove ls1021 PCI device ID. >> 4. remove unused irq pme_irq and ls_pcie_list. >> 5. Do not set scfg bit reverse mode >> >> .../devicetree/bindings/pci/layerscape-pci.txt | 45 ++++ >> drivers/pci/host/Kconfig | 8 + >> drivers/pci/host/Makefile | 1 + >> drivers/pci/host/pci-layerscape.c | 278 +++++++++++++++++++++ >> 4 files changed, 332 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt >> create mode 100644 drivers/pci/host/pci-layerscape.c >> >> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt >> new file mode 100644 >> index 0000000..1a5dbd8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt >> @@ -0,0 +1,45 @@ >> +Freescale Layerscape PCIe controller >> + >> +This PCIe host controller is based on the Synopsis Designware PCIe IP >> +and thus inherits all the common properties defined in designware-pcie.txt. >> + >> +Required properties: >> +- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" >> +- reg: base addresses and lengths of the PCIe controller >> +- interrupts: A list of interrupt outputs of the controller. Must contain an >> + entry for each entry in the interrupt-names property. >> +- interrupt-names: Must include the following entries: >> + "intr": The interrupt that is asserted for controller interrupts >> + "msi": The interrupt that is asserted when an MSI is received >> + "pme": The interrupt that is asserted when PME state changes >> +- pcie-scfg: Must include two entries. > fsl,pcie-scfg [Minghuan] Ok. I will rename the property. >> + The first entry must be a link to the SCFG device node >> + The second entry must be '0' or '1' based on physical PCIe controller index. >> + used to get SCFG PEXN registers >> + >> +Example: >> + >> + pcie@3400000 { >> + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; > Can we rely on the config space vendor/device ID instead of hardcoding > the SoC here? [Minghuan] No, for a SoC may have several device ID. For example: LS1021A RM says : 0x0E0A LS1021A with security 0x0E0B LS1021A without security But I read device ID 0x0e00 from some LS1021A boards. 0x0e06 from some LS1021A boards. this may be caused by different CPLD. >> + reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ >> + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ >> + reg-names = "regs", "config"; >> + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ >> + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */ >> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ >> + interrupt-names = "intr", "msi", "pme"; >> + pcie-scfg = <&scfg 0>; >> + #address-cells = <3>; >> + #size-cells = <2>; >> + device_type = "pci"; >> + num-lanes = <4>; >> + bus-range = <0x00 0xff>; >> + ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000 /* downstream I/O */ >> + 0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */ > Are these ranges hardcoded in the SoC, or are they the result of iATU > settings? If the latter, who configures it and why no prefetchable > region? [Minghuan] 400000_0000 - 480000_0000 is hardcode assigned to PEX1. I separates from this 32 region 1M for IO, 4G for non-prefetchable memory. 4G is the max size iATU supported. IO and memory region will be set to iATU by pci-designware.c Because both powerpc and imx do not set prefechable memory, so I do not assign prefetchable memory either. >> + #interrupt-cells = <1>; >> + interrupt-map-mask = <0 0 0 7>; >> + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, >> + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, >> + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, >> + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig >> index 34134d6..c826949 100644 >> --- a/drivers/pci/host/Kconfig >> +++ b/drivers/pci/host/Kconfig >> @@ -82,4 +82,12 @@ config PCIE_XILINX >> Say 'Y' here if you want kernel to support the Xilinx AXI PCIe >> Host Bridge driver. >> >> +config PCI_LAYERSCAPE >> + bool "Freescale Layerscape PCIe controller" >> + depends on SOC_LS1021A >> + select PCIE_DW >> + select MFD_SYSCON >> + help >> + Say Y here if you want PCIe controller support on Layerscape SoCs. > Why does it depend on this particular SoC? Is the same PCIe controller > going to be used on other Layerscape chips? [Minghuan] LS1021A platform patch only contains SOC name no ARCH name. Both LS1042 and LS2085 RM do not contain PCI chapter. I am not sure they will use the same IP. I can remove 'depends on' and wait for the Layerscape ARCH name then add it. The other Layerscape will use ARM v8. I am not even sure LS1021 will be belong to LS1. > >> +static irqreturn_t ls_pcie_msi_irq_handler(int irq, void *data) >> +{ >> + struct pcie_port *pp = data; >> + struct ls_pcie *pcie = to_ls_pcie(pp); >> + unsigned int msi_irq; >> + >> + /* clear the interrupt */ >> + regmap_write(pcie->scfg, SCFG_SPIMSICLRCR, >> + MSI_LS1021A_DATA(pcie->index)); >> + >> + msi_irq = irq_find_mapping(pp->irq_domain, 0); >> + if (msi_irq) >> + generic_handle_irq(msi_irq); >> + else >> + /* >> + * that's weird who triggered this? >> + * just clear it >> + */ >> + dev_info(pcie->dev, "unexpected MSI\n"); >> + >> + return IRQ_HANDLED; >> +} >> + > Why are you returning IRQ_HANDLED in the "unexpected MSI" case? [Minghuan] The interrupt located in top layer chip is dedicated to 32 MSI interrupts. This handler has cleaned the interrupt, so I think it can return IRQ_HANDLED although the special MSI interrupt belong second layer chip has not been registered. > > -Scott > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 2014-09-12 at 11:10 +0000, Lian Minghuan-B31939 wrote: > Hi Scott, > > Please see my comments inline. > > On 2014?09?11? 21:24, Scott Wood wrote: > > On Thu, 2014-09-11 at 21:09 +0000, Minghuan Lian wrote: > >> Add support for Freescale Layerscape PCIe controller. This driver > >> re-uses the designware core code. > >> > >> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> > >> --- > >> Change log: > >> v2: > >> 1. Add pcie-scfg to link scfg device node and remove "fsl, ls-pcie" compatible > >> 2. Use regmap API to access scfg. > >> 3. remove ls1021 PCI device ID. > >> 4. remove unused irq pme_irq and ls_pcie_list. > >> 5. Do not set scfg bit reverse mode > >> > >> .../devicetree/bindings/pci/layerscape-pci.txt | 45 ++++ > >> drivers/pci/host/Kconfig | 8 + > >> drivers/pci/host/Makefile | 1 + > >> drivers/pci/host/pci-layerscape.c | 278 +++++++++++++++++++++ > >> 4 files changed, 332 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt > >> create mode 100644 drivers/pci/host/pci-layerscape.c > >> > >> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > >> new file mode 100644 > >> index 0000000..1a5dbd8 > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt > >> @@ -0,0 +1,45 @@ > >> +Freescale Layerscape PCIe controller > >> + > >> +This PCIe host controller is based on the Synopsis Designware PCIe IP > >> +and thus inherits all the common properties defined in designware-pcie.txt. > >> + > >> +Required properties: > >> +- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" > >> +- reg: base addresses and lengths of the PCIe controller > >> +- interrupts: A list of interrupt outputs of the controller. Must contain an > >> + entry for each entry in the interrupt-names property. > >> +- interrupt-names: Must include the following entries: > >> + "intr": The interrupt that is asserted for controller interrupts > >> + "msi": The interrupt that is asserted when an MSI is received > >> + "pme": The interrupt that is asserted when PME state changes > >> +- pcie-scfg: Must include two entries. > > fsl,pcie-scfg > [Minghuan] Ok. I will rename the property. > >> + The first entry must be a link to the SCFG device node > >> + The second entry must be '0' or '1' based on physical PCIe controller index. > >> + used to get SCFG PEXN registers > >> + > >> +Example: > >> + > >> + pcie@3400000 { > >> + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; > > Can we rely on the config space vendor/device ID instead of hardcoding > > the SoC here? > [Minghuan] No, for a SoC may have several device ID. > For example: > LS1021A RM says : > 0x0E0A LS1021A with security > 0x0E0B LS1021A without security > But I read device ID 0x0e00 from some LS1021A boards. > 0x0e06 from some LS1021A boards. this may be caused by different CPLD. :-( > >> + reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ > >> + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ > >> + reg-names = "regs", "config"; > >> + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ > >> + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */ > >> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ > >> + interrupt-names = "intr", "msi", "pme"; > >> + pcie-scfg = <&scfg 0>; > >> + #address-cells = <3>; > >> + #size-cells = <2>; > >> + device_type = "pci"; > >> + num-lanes = <4>; > >> + bus-range = <0x00 0xff>; > >> + ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000 /* downstream I/O */ > >> + 0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */ > > Are these ranges hardcoded in the SoC, or are they the result of iATU > > settings? If the latter, who configures it and why no prefetchable > > region? > [Minghuan] 400000_0000 - 480000_0000 is hardcode assigned to PEX1. > I separates from this 32 region 1M for IO, 4G for non-prefetchable memory. > 4G is the max size iATU supported. > IO and memory region will be set to iATU by pci-designware.c > Because both powerpc and imx do not set prefechable memory, > so I do not assign prefetchable memory either. If there's spare room in the addres space for a prefetchable region, why not make one, regardless of what PPC and IMX do? FWIW, I believe that ARMv8 can make better use of a prefetchable region due to the "gathering" storage attribute, so even if you don't use one on LS1021A consider using one on ARMv8-based LS chips. > >> + #interrupt-cells = <1>; > >> + interrupt-map-mask = <0 0 0 7>; > >> + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, > >> + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, > >> + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, > >> + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; > >> + }; > >> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig > >> index 34134d6..c826949 100644 > >> --- a/drivers/pci/host/Kconfig > >> +++ b/drivers/pci/host/Kconfig > >> @@ -82,4 +82,12 @@ config PCIE_XILINX > >> Say 'Y' here if you want kernel to support the Xilinx AXI PCIe > >> Host Bridge driver. > >> > >> +config PCI_LAYERSCAPE > >> + bool "Freescale Layerscape PCIe controller" > >> + depends on SOC_LS1021A > >> + select PCIE_DW > >> + select MFD_SYSCON > >> + help > >> + Say Y here if you want PCIe controller support on Layerscape SoCs. > > Why does it depend on this particular SoC? Is the same PCIe controller > > going to be used on other Layerscape chips? > [Minghuan] LS1021A platform patch only contains SOC name no ARCH name. > Both LS1042 and LS2085 RM do not contain PCI chapter. I am not sure they > will use the same IP. > I can remove 'depends on' and wait for the Layerscape ARCH name then add it. > The other Layerscape will use ARM v8. I am not even sure LS1021 will be > belong > to LS1. Why do you need any dependency here other than what is required to make the driver build? > >> +static irqreturn_t ls_pcie_msi_irq_handler(int irq, void *data) > >> +{ > >> + struct pcie_port *pp = data; > >> + struct ls_pcie *pcie = to_ls_pcie(pp); > >> + unsigned int msi_irq; > >> + > >> + /* clear the interrupt */ > >> + regmap_write(pcie->scfg, SCFG_SPIMSICLRCR, > >> + MSI_LS1021A_DATA(pcie->index)); > >> + > >> + msi_irq = irq_find_mapping(pp->irq_domain, 0); > >> + if (msi_irq) > >> + generic_handle_irq(msi_irq); > >> + else > >> + /* > >> + * that's weird who triggered this? > >> + * just clear it > >> + */ > >> + dev_info(pcie->dev, "unexpected MSI\n"); > >> + > >> + return IRQ_HANDLED; > >> +} > >> + > > Why are you returning IRQ_HANDLED in the "unexpected MSI" case? > [Minghuan] The interrupt located in top layer chip is dedicated to 32 > MSI interrupts. > This handler has cleaned the interrupt, so I think it can return IRQ_HANDLED > although the special MSI interrupt belong second layer chip has not > been registered. If it's wrong enough to print "unexpected MSI" (BTW, please use either dev_dbg or a ratelimited dev_err for that, and include the IRQ number), then it's wrong enough to return IRQ_NONE so that the upper layers know the interrupt was not handled. -Scott -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday 16 September 2014, Lian Minghuan-B31939 wrote: > >>>> + ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000 /* downstream I/O */ > >>>> + 0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */ > >>> Are these ranges hardcoded in the SoC, or are they the result of iATU > >>> settings? If the latter, who configures it and why no prefetchable > >>> region? > >> [Minghuan] 400000_0000 - 480000_0000 is hardcode assigned to PEX1. > >> I separates from this 32 region 1M for IO, 4G for non-prefetchable memory. > >> 4G is the max size iATU supported. > >> IO and memory region will be set to iATU by pci-designware.c > >> Because both powerpc and imx do not set prefechable memory, > >> so I do not assign prefetchable memory either. > > If there's spare room in the addres space for a prefetchable region, why > > not make one, regardless of what PPC and IMX do? > > > > FWIW, I believe that ARMv8 can make better use of a prefetchable region > > due to the "gathering" storage attribute, so even if you don't use one > > on LS1021A consider using one on ARMv8-based LS chips. > [Minghuan] Ok, I will add 4G prefetchable memory region. I guess that means you still can't support devices that require 64-bit BARs, right? 4GB may be too small for some devices. Do I read this right that you could have multiple adjacent 4GB areas but are limited on registers to set up these areas? Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2014?09?16? 04:19, Scott Wood wrote: > On Fri, 2014-09-12 at 11:10 +0000, Lian Minghuan-B31939 wrote: >> Hi Scott, >> >> Please see my comments inline. >> >> On 2014?09?11? 21:24, Scott Wood wrote: >>> On Thu, 2014-09-11 at 21:09 +0000, Minghuan Lian wrote: >>>> Add support for Freescale Layerscape PCIe controller. This driver >>>> re-uses the designware core code. >>>> >>>> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> >>>> --- >>>> Change log: >>>> v2: >>>> 1. Add pcie-scfg to link scfg device node and remove "fsl, ls-pcie" compatible >>>> 2. Use regmap API to access scfg. >>>> 3. remove ls1021 PCI device ID. >>>> 4. remove unused irq pme_irq and ls_pcie_list. >>>> 5. Do not set scfg bit reverse mode >>>> >>>> .../devicetree/bindings/pci/layerscape-pci.txt | 45 ++++ >>>> drivers/pci/host/Kconfig | 8 + >>>> drivers/pci/host/Makefile | 1 + >>>> drivers/pci/host/pci-layerscape.c | 278 +++++++++++++++++++++ >>>> 4 files changed, 332 insertions(+) >>>> create mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt >>>> create mode 100644 drivers/pci/host/pci-layerscape.c >>>> >>>> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt >>>> new file mode 100644 >>>> index 0000000..1a5dbd8 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt >>>> @@ -0,0 +1,45 @@ >>>> +Freescale Layerscape PCIe controller >>>> + >>>> +This PCIe host controller is based on the Synopsis Designware PCIe IP >>>> +and thus inherits all the common properties defined in designware-pcie.txt. >>>> + >>>> +Required properties: >>>> +- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" >>>> +- reg: base addresses and lengths of the PCIe controller >>>> +- interrupts: A list of interrupt outputs of the controller. Must contain an >>>> + entry for each entry in the interrupt-names property. >>>> +- interrupt-names: Must include the following entries: >>>> + "intr": The interrupt that is asserted for controller interrupts >>>> + "msi": The interrupt that is asserted when an MSI is received >>>> + "pme": The interrupt that is asserted when PME state changes >>>> +- pcie-scfg: Must include two entries. >>> fsl,pcie-scfg >> [Minghuan] Ok. I will rename the property. >>>> + The first entry must be a link to the SCFG device node >>>> + The second entry must be '0' or '1' based on physical PCIe controller index. >>>> + used to get SCFG PEXN registers >>>> + >>>> +Example: >>>> + >>>> + pcie@3400000 { >>>> + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; >>> Can we rely on the config space vendor/device ID instead of hardcoding >>> the SoC here? >> [Minghuan] No, for a SoC may have several device ID. >> For example: >> LS1021A RM says : >> 0x0E0A LS1021A with security >> 0x0E0B LS1021A without security >> But I read device ID 0x0e00 from some LS1021A boards. >> 0x0e06 from some LS1021A boards. this may be caused by different CPLD. > :-( > >>>> + reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ >>>> + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ >>>> + reg-names = "regs", "config"; >>>> + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ >>>> + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */ >>>> + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ >>>> + interrupt-names = "intr", "msi", "pme"; >>>> + pcie-scfg = <&scfg 0>; >>>> + #address-cells = <3>; >>>> + #size-cells = <2>; >>>> + device_type = "pci"; >>>> + num-lanes = <4>; >>>> + bus-range = <0x00 0xff>; >>>> + ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000 /* downstream I/O */ >>>> + 0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */ >>> Are these ranges hardcoded in the SoC, or are they the result of iATU >>> settings? If the latter, who configures it and why no prefetchable >>> region? >> [Minghuan] 400000_0000 - 480000_0000 is hardcode assigned to PEX1. >> I separates from this 32 region 1M for IO, 4G for non-prefetchable memory. >> 4G is the max size iATU supported. >> IO and memory region will be set to iATU by pci-designware.c >> Because both powerpc and imx do not set prefechable memory, >> so I do not assign prefetchable memory either. > If there's spare room in the addres space for a prefetchable region, why > not make one, regardless of what PPC and IMX do? > > FWIW, I believe that ARMv8 can make better use of a prefetchable region > due to the "gathering" storage attribute, so even if you don't use one > on LS1021A consider using one on ARMv8-based LS chips. [Minghuan] Ok, I will add 4G prefetchable memory region. >>>> + #interrupt-cells = <1>; >>>> + interrupt-map-mask = <0 0 0 7>; >>>> + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, >>>> + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, >>>> + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, >>>> + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; >>>> + }; >>>> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig >>>> index 34134d6..c826949 100644 >>>> --- a/drivers/pci/host/Kconfig >>>> +++ b/drivers/pci/host/Kconfig >>>> @@ -82,4 +82,12 @@ config PCIE_XILINX >>>> Say 'Y' here if you want kernel to support the Xilinx AXI PCIe >>>> Host Bridge driver. >>>> >>>> +config PCI_LAYERSCAPE >>>> + bool "Freescale Layerscape PCIe controller" >>>> + depends on SOC_LS1021A >>>> + select PCIE_DW >>>> + select MFD_SYSCON >>>> + help >>>> + Say Y here if you want PCIe controller support on Layerscape SoCs. >>> Why does it depend on this particular SoC? Is the same PCIe controller >>> going to be used on other Layerscape chips? >> [Minghuan] LS1021A platform patch only contains SOC name no ARCH name. >> Both LS1042 and LS2085 RM do not contain PCI chapter. I am not sure they >> will use the same IP. >> I can remove 'depends on' and wait for the Layerscape ARCH name then add it. >> The other Layerscape will use ARM v8. I am not even sure LS1021 will be >> belong >> to LS1. > Why do you need any dependency here other than what is required to make > the driver build? > [Minghuan] Ok, I will remove "deponds on" >>>> +static irqreturn_t ls_pcie_msi_irq_handler(int irq, void *data) >>>> +{ >>>> + struct pcie_port *pp = data; >>>> + struct ls_pcie *pcie = to_ls_pcie(pp); >>>> + unsigned int msi_irq; >>>> + >>>> + /* clear the interrupt */ >>>> + regmap_write(pcie->scfg, SCFG_SPIMSICLRCR, >>>> + MSI_LS1021A_DATA(pcie->index)); >>>> + >>>> + msi_irq = irq_find_mapping(pp->irq_domain, 0); >>>> + if (msi_irq) >>>> + generic_handle_irq(msi_irq); >>>> + else >>>> + /* >>>> + * that's weird who triggered this? >>>> + * just clear it >>>> + */ >>>> + dev_info(pcie->dev, "unexpected MSI\n"); >>>> + >>>> + return IRQ_HANDLED; >>>> +} >>>> + >>> Why are you returning IRQ_HANDLED in the "unexpected MSI" case? >> [Minghuan] The interrupt located in top layer chip is dedicated to 32 >> MSI interrupts. >> This handler has cleaned the interrupt, so I think it can return IRQ_HANDLED >> although the special MSI interrupt belong second layer chip has not >> been registered. > If it's wrong enough to print "unexpected MSI" (BTW, please use either > dev_dbg or a ratelimited dev_err for that, and include the IRQ number), > then it's wrong enough to return IRQ_NONE so that the upper layers know > the interrupt was not handled. [Minghuan] Ok, I will fix it. > -Scott > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Arnd, On 2014?09?16? 16:33, Arnd Bergmann wrote: > On Tuesday 16 September 2014, Lian Minghuan-B31939 wrote: >>>>>> + ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000 /* downstream I/O */ >>>>>> + 0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */ >>>>> Are these ranges hardcoded in the SoC, or are they the result of iATU >>>>> settings? If the latter, who configures it and why no prefetchable >>>>> region? >>>> [Minghuan] 400000_0000 - 480000_0000 is hardcode assigned to PEX1. >>>> I separates from this 32 region 1M for IO, 4G for non-prefetchable memory. >>>> 4G is the max size iATU supported. >>>> IO and memory region will be set to iATU by pci-designware.c >>>> Because both powerpc and imx do not set prefechable memory, >>>> so I do not assign prefetchable memory either. >>> If there's spare room in the addres space for a prefetchable region, why >>> not make one, regardless of what PPC and IMX do? >>> >>> FWIW, I believe that ARMv8 can make better use of a prefetchable region >>> due to the "gathering" storage attribute, so even if you don't use one >>> on LS1021A consider using one on ARMv8-based LS chips. >> [Minghuan] Ok, I will add 4G prefetchable memory region. > I guess that means you still can't support devices that require 64-bit > BARs, right? 4GB may be too small for some devices. > > Do I read this right that you could have multiple adjacent 4GB areas > but are limited on registers to set up these areas? [Minghuan] Yes, an iATU supports up to 4GB in size. We can create multiple iATU to cover a region larger than 4G. > Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt new file mode 100644 index 0000000..1a5dbd8 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -0,0 +1,45 @@ +Freescale Layerscape PCIe controller + +This PCIe host controller is based on the Synopsis Designware PCIe IP +and thus inherits all the common properties defined in designware-pcie.txt. + +Required properties: +- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" +- reg: base addresses and lengths of the PCIe controller +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: Must include the following entries: + "intr": The interrupt that is asserted for controller interrupts + "msi": The interrupt that is asserted when an MSI is received + "pme": The interrupt that is asserted when PME state changes +- pcie-scfg: Must include two entries. + The first entry must be a link to the SCFG device node + The second entry must be '0' or '1' based on physical PCIe controller index. + used to get SCFG PEXN registers + +Example: + + pcie@3400000 { + compatible = "fsl,ls1021a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ + 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, /* MSI interrupt */ + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ + interrupt-names = "intr", "msi", "pme"; + pcie-scfg = <&scfg 0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */ + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 34134d6..c826949 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -82,4 +82,12 @@ config PCIE_XILINX Say 'Y' here if you want kernel to support the Xilinx AXI PCIe Host Bridge driver. +config PCI_LAYERSCAPE + bool "Freescale Layerscape PCIe controller" + depends on SOC_LS1021A + select PCIE_DW + select MFD_SYSCON + help + Say Y here if you want PCIe controller support on Layerscape SoCs. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 182929c..fd10554 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c new file mode 100644 index 0000000..bba7729 --- /dev/null +++ b/drivers/pci/host/pci-layerscape.c @@ -0,0 +1,278 @@ +/* + * PCIe host controller driver for Freescale Layerscape SoCs + * + * Copyright (C) 2014 Freescale Semiconductor. + * + * Author: Minghuan Lian <Minghuan.Lian@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_pci.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/bitrev.h> + +#include "pcie-designware.h" + +/* PEX1/2 Misc Ports Status Register */ +#define SCFG_PEXMSCPORTSR(pex_idx) (0x94 + (pex_idx) * 4) +#define LTSSM_STATE_SHIFT 20 +#define LTSSM_STATE_MASK 0x3f +#define LTSSM_PCIE_L0 0x11 /* L0 state */ + +/* SCFG MSI register */ +#define SCFG_SPIMSICR 0x40 +#define SCFG_SPIMSICLRCR 0x90 + +#define MSI_LS1021A_ADDR 0x1570040 +#define MSI_LS1021A_DATA(pex_idx) (0xb3 + pex_idx) + +/* Symbol Timer Register and Filter Mask Register 1 */ +#define PCIE_STRFMR1 0x71c + +struct ls_pcie { + struct list_head node; + struct device *dev; + struct pci_bus *bus; + void __iomem *dbi; + struct regmap *scfg; + struct pcie_port pp; + int index; + int msi_irq; +}; + +#define to_ls_pcie(x) container_of(x, struct ls_pcie, pp) + +static int ls_pcie_link_up(struct pcie_port *pp) +{ + u32 state; + struct ls_pcie *pcie = to_ls_pcie(pp); + + regmap_read(pcie->scfg, SCFG_PEXMSCPORTSR(pcie->index), &state); + state = bitrev32(state); + state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK; + + if (state < LTSSM_PCIE_L0) + return 0; + + return 1; +} + +static u32 ls_pcie_get_msi_addr(struct pcie_port *pp) +{ + return MSI_LS1021A_ADDR; +} + +static u32 ls_pcie_get_msi_data(struct pcie_port *pp, int pos) +{ + struct ls_pcie *pcie = to_ls_pcie(pp); + + return MSI_LS1021A_DATA(pcie->index); +} + +static irqreturn_t ls_pcie_msi_irq_handler(int irq, void *data) +{ + struct pcie_port *pp = data; + struct ls_pcie *pcie = to_ls_pcie(pp); + unsigned int msi_irq; + + /* clear the interrupt */ + regmap_write(pcie->scfg, SCFG_SPIMSICLRCR, + MSI_LS1021A_DATA(pcie->index)); + + msi_irq = irq_find_mapping(pp->irq_domain, 0); + if (msi_irq) + generic_handle_irq(msi_irq); + else + /* + * that's weird who triggered this? + * just clear it + */ + dev_info(pcie->dev, "unexpected MSI\n"); + + return IRQ_HANDLED; +} + +static void ls_pcie_msi_clear_irq(struct pcie_port *pp, int irq) +{ +} + +static void ls_pcie_msi_set_irq(struct pcie_port *pp, int irq) +{ +} + +static void ls1021a_pcie_msi_fixup(struct pcie_port *pp) +{ + int i; + + /* + * LS1021A has only one MSI interrupt + * Set all msi interrupts as used except the first one + */ + for (i = 1; i < MAX_MSI_IRQS; i++) + set_bit(i, pp->msi_irq_in_use); +} + +static void ls_pcie_host_init(struct pcie_port *pp) +{ + struct ls_pcie *pcie = to_ls_pcie(pp); + int count = 0; + u32 val; + + dw_pcie_setup_rc(pp); + + while (!ls_pcie_link_up(pp)) { + usleep_range(100, 1000); + count++; + if (count >= 200) { + dev_err(pp->dev, "phy link never came up\n"); + return; + } + } + + if (of_device_is_compatible(pcie->dev->of_node, "fsl,ls1021a-pcie")) { + /* + * LS1021A Workaround for internal TKT228622 + * to fix the INTx hang issue + */ + val = ioread32(pcie->dbi + PCIE_STRFMR1); + val &= 0xffff; + iowrite32(val, pcie->dbi + PCIE_STRFMR1); + + ls1021a_pcie_msi_fixup(pp); + } +} + +static struct pcie_host_ops ls_pcie_host_ops = { + .link_up = ls_pcie_link_up, + .host_init = ls_pcie_host_init, + .msi_set_irq = ls_pcie_msi_set_irq, + .msi_clear_irq = ls_pcie_msi_clear_irq, + .get_msi_addr = ls_pcie_get_msi_addr, + .get_msi_data = ls_pcie_get_msi_data, +}; + +static int ls_add_pcie_port(struct ls_pcie *pcie) +{ + struct pcie_port *pp; + int ret; + + if (!pcie) + return -EINVAL; + + pp = &pcie->pp; + pp->dev = pcie->dev; + pp->dbi_base = pcie->dbi; + pp->msi_irq = pcie->msi_irq; + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + ret = devm_request_irq(pp->dev, pp->msi_irq, + ls_pcie_msi_irq_handler, + IRQF_SHARED, "ls-pcie-msi", pp); + if (ret) { + dev_err(pp->dev, "failed to request msi irq\n"); + return ret; + } + } + + pp->root_bus_nr = -1; + pp->ops = &ls_pcie_host_ops; + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(pp->dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static int __init ls_pcie_probe(struct platform_device *pdev) +{ + struct ls_pcie *pcie; + struct resource *dbi_base; + u32 index[2]; + int ret; + + pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->dev = &pdev->dev; + + dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + if (!dbi_base) { + dev_err(&pdev->dev, "missing *regs* space\n"); + return -ENODEV; + } + + pcie->dbi = devm_ioremap_resource(&pdev->dev, dbi_base); + if (IS_ERR(pcie->dbi)) + return PTR_ERR(pcie->dbi); + + pcie->scfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "pcie-scfg"); + if (IS_ERR(pcie->scfg)) { + dev_err(&pdev->dev, "No syscfg phandle specified\n"); + return PTR_ERR(pcie->scfg); + } + + ret = of_property_read_u32_array(pdev->dev.of_node, + "pcie-scfg", index, 2); + if (ret) + return ret; + pcie->index = index[1]; + + pcie->msi_irq = platform_get_irq_byname(pdev, "msi"); + if (pcie->msi_irq < 0) { + dev_err(&pdev->dev, + "failed to get MSI IRQ: %d\n", pcie->msi_irq); + return pcie->msi_irq; + } + + ret = ls_add_pcie_port(pcie); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, pcie); + + return 0; +} + +static const struct of_device_id ls_pcie_of_match[] = { + { .compatible = "fsl,ls1021a-pcie" }, + { }, +}; +MODULE_DEVICE_TABLE(of, ls_pcie_of_match); + +static struct platform_driver ls_pcie_driver = { + .driver = { + .name = "layerscape-pcie", + .owner = THIS_MODULE, + .of_match_table = ls_pcie_of_match, + }, +}; + +/* Freescale PCIe driver does not allow module unload */ +static int __init ls_pcie_init(void) +{ + return platform_driver_probe(&ls_pcie_driver, ls_pcie_probe); +} +subsys_initcall(ls_pcie_init); + +MODULE_AUTHOR("Minghuan Lian <Minghuan.Lian@freescale.com>"); +MODULE_DESCRIPTION("Freescale Layerscape PCIe host controller driver"); +MODULE_LICENSE("GPL v2");
Add support for Freescale Layerscape PCIe controller. This driver re-uses the designware core code. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> --- Change log: v2: 1. Add pcie-scfg to link scfg device node and remove "fsl, ls-pcie" compatible 2. Use regmap API to access scfg. 3. remove ls1021 PCI device ID. 4. remove unused irq pme_irq and ls_pcie_list. 5. Do not set scfg bit reverse mode .../devicetree/bindings/pci/layerscape-pci.txt | 45 ++++ drivers/pci/host/Kconfig | 8 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-layerscape.c | 278 +++++++++++++++++++++ 4 files changed, 332 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/layerscape-pci.txt create mode 100644 drivers/pci/host/pci-layerscape.c