| Message ID | 20140918053457.GA15363@shlinux1.ap.freescale.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 18 September 2014 07:35, Dong Aisheng <b29396@freescale.com> wrote: > On Thu, Sep 18, 2014 at 12:29:52AM +0200, Ulf Hansson wrote: >> On 3 September 2014 14:05, Dong Aisheng <b29396@freescale.com> wrote: >> > The imx6sx usdhc is derived from imx6sl, the difference is minor. >> > imx6sx have the errata ESDHC_FLAG_ERR004536 fixed. >> > So introduce a new compatible string for imx6sx to distinguish them. >> > >> > Signed-off-by: Dong Aisheng <b29396@freescale.com> >> >> Hi Dong, >> >> This one has checkpatch errors due to missing DT documentation. >> > > The original binding doc is writing in the format of: > Required properties: > -- compatible : Should be "fsl,<chip>-esdhc" > It just provides a rule and does not provide the specific compatible string. > So i did not update the doc before. > > But i think it's better to fix it to avoid future warning again. > > Can you help add below patch before this commit or do you need me > to resend the patch series again with this patch added? Please make resend, that's easier for me to handle. Kind regards Uffe > > From 467b84e5ffcba543b9ac88913b1d2dc1159dfa72 Mon Sep 17 00:00:00 2001 > From: Dong Aisheng <b29396@freescale.com> > Date: Thu, 18 Sep 2014 13:11:03 +0800 > Subject: [PATCH 6/8] mmc: sdhci-esdhc-imx: using specific compatible string > in binding doc > > Using specific compatible string in binding doc to make the binding > more clear. > It's also used to avoid checkpatch warning in the future like follows: > 0005-mmc-sdhci-do-not-enable-card-cd-wakeup-for-gpio-case.patch has no obvious style problems and is ready for submission. > WARNING: DT compatible string "fsl,imx6sx-usdhc" appears un-documented -- check ./Documentation/devicetree/bindings/ > + { .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, }, > > total: 0 errors, 1 warnings, 18 lines checked > > Signed-off-by: Dong Aisheng <b29396@freescale.com> > --- > .../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 9 ++++++++- > 1 files changed, 8 insertions(+), 1 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt > index 9046ba06..c415d34 100644 > --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt > +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt > @@ -7,7 +7,14 @@ This file documents differences between the core properties described > by mmc.txt and the properties used by the sdhci-esdhc-imx driver. > > Required properties: > -- compatible : Should be "fsl,<chip>-esdhc" > +- compatible : Should be "fsl,<chip>-esdhc", the supported chips include > + "fsl,imx25-esdhc" > + "fsl,imx35-esdhc" > + "fsl,imx51-esdhc" > + "fsl,imx53-esdhc" > + "fsl,imx6q-usdhc" > + "fsl,imx6sl-usdhc" > + "fsl,imx6sx-usdhc" > > Optional properties: > - fsl,cd-controller : Indicate to use controller internal card detection > -- > 1.7.8 > > Regards > Dong Aisheng > >> Kind regards >> Uffe >> >> > --- >> > drivers/mmc/host/sdhci-esdhc-imx.c | 6 ++++++ >> > 1 files changed, 6 insertions(+), 0 deletions(-) >> > >> > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c >> > index dc0e384..87179c4 100644 >> > --- a/drivers/mmc/host/sdhci-esdhc-imx.c >> > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c >> > @@ -150,6 +150,11 @@ static struct esdhc_soc_data usdhc_imx6sl_data = { >> > | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536, >> > }; >> > >> > +static struct esdhc_soc_data usdhc_imx6sx_data = { >> > + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING >> > + | ESDHC_FLAG_HAVE_CAP1, >> > +}; >> > + >> > struct pltfm_imx_data { >> > u32 scratchpad; >> > struct pinctrl *pinctrl; >> > @@ -190,6 +195,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { >> > { .compatible = "fsl,imx35-esdhc", .data = &esdhc_imx35_data, }, >> > { .compatible = "fsl,imx51-esdhc", .data = &esdhc_imx51_data, }, >> > { .compatible = "fsl,imx53-esdhc", .data = &esdhc_imx53_data, }, >> > + { .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, }, >> > { .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, }, >> > { .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, }, >> > { /* sentinel */ } >> > -- >> > 1.7.8 >> > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 9046ba06..c415d34 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -7,7 +7,14 @@ This file documents differences between the core properties described by mmc.txt and the properties used by the sdhci-esdhc-imx driver. Required properties: -- compatible : Should be "fsl,<chip>-esdhc" +- compatible : Should be "fsl,<chip>-esdhc", the supported chips include + "fsl,imx25-esdhc" + "fsl,imx35-esdhc" + "fsl,imx51-esdhc" + "fsl,imx53-esdhc" + "fsl,imx6q-usdhc" + "fsl,imx6sl-usdhc" + "fsl,imx6sx-usdhc" Optional properties: - fsl,cd-controller : Indicate to use controller internal card detection