| Message ID | 1410598342-31094-4-git-send-email-fschaefer.oss@googlemail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Em Sat, 13 Sep 2014 10:52:22 +0200 Frank Schäfer <fschaefer.oss@googlemail.com> escreveu: > Now that we have enum em28xx_int_audio (none/i2s/ac97), it is no longer > necessary to check dev->audio_mode.ac97 to determine the type of internal audio connection. > There is also no need to save the type of the detected AC97 chip. Removing the AC97 chip is a bad idea, as the mux of each AC97 device is different. I don't remember anymore what device comes with the sigmatel chips, but it does have a different mixer than em202. The logic to set it different is not there basically for two reasons: 1) I don't have the device with sigmatel (I think someone borrowed it to me at that time, and for a very limited period of time); 2) there's a hole ac97 support at /sound. The idea is to re-use it instead of reinventing the wheel, but that requires time and a few different AC97 setups. Btw, there are other em28xx devices with other non-em202 AC97 chips out there, with different settings (and even different sampling rates). Those AC97 devices are generally found at the "grabber" devices. Regards, Mauro > > So replce the remaining checks of dev->audio_mode.ac97 with equivalent checks > of dev->int_audio_type and get rid of struct em28xx_ac97_mode and finally the > whole struct em28xx_audio_mode. > > Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> > --- > drivers/media/usb/em28xx/em28xx-audio.c | 2 +- > drivers/media/usb/em28xx/em28xx-core.c | 36 ++++++--------------------------- > drivers/media/usb/em28xx/em28xx-video.c | 2 +- > drivers/media/usb/em28xx/em28xx.h | 13 ------------ > 4 files changed, 8 insertions(+), 45 deletions(-) > > diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c > index 90c7a83..c3a4224 100644 > --- a/drivers/media/usb/em28xx/em28xx-audio.c > +++ b/drivers/media/usb/em28xx/em28xx-audio.c > @@ -933,7 +933,7 @@ static int em28xx_audio_init(struct em28xx *dev) > > INIT_WORK(&adev->wq_trigger, audio_trigger); > > - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { > + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { > em28xx_cvol_new(card, dev, "Video", AC97_VIDEO); > em28xx_cvol_new(card, dev, "Line In", AC97_LINE); > em28xx_cvol_new(card, dev, "Phone", AC97_PHONE); > diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c > index ed83e4e..7464e70 100644 > --- a/drivers/media/usb/em28xx/em28xx-core.c > +++ b/drivers/media/usb/em28xx/em28xx-core.c > @@ -405,12 +405,8 @@ static int em28xx_set_audio_source(struct em28xx *dev) > return ret; > msleep(5); > > - switch (dev->audio_mode.ac97) { > - case EM28XX_NO_AC97: > - break; > - default: > + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) > ret = set_ac97_input(dev); > - } > > return ret; > } > @@ -439,7 +435,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) > /* It is assumed that all devices use master volume for output. > It would be possible to use also line output. > */ > - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { > + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { > /* Mute all outputs */ > for (i = 0; i < ARRAY_SIZE(outputs); i++) { > ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000); > @@ -462,7 +458,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) > ret = em28xx_set_audio_source(dev); > > /* Sets volume */ > - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { > + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { > int vol; > > em28xx_write_ac97(dev, AC97_POWERDOWN, 0x4200); > @@ -544,14 +540,11 @@ int em28xx_audio_setup(struct em28xx *dev) > em28xx_info("I2S Audio (%d sample rate(s))\n", > i2s_samplerates); > /* Skip the code that does AC97 vendor detection */ > - dev->audio_mode.ac97 = EM28XX_NO_AC97; > goto init_audio; > } else { > dev->int_audio_type = EM28XX_INT_AUDIO_AC97; > } > > - dev->audio_mode.ac97 = EM28XX_AC97_OTHER; > - > vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1); > if (vid1 < 0) { > /* > @@ -560,7 +553,6 @@ int em28xx_audio_setup(struct em28xx *dev) > * CHIPCFG register, even not having an AC97 chip > */ > em28xx_warn("AC97 chip type couldn't be determined\n"); > - dev->audio_mode.ac97 = EM28XX_NO_AC97; > if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) > dev->usb_audio_type = EM28XX_USB_AUDIO_NONE; > dev->int_audio_type = EM28XX_INT_AUDIO_NONE; > @@ -582,30 +574,14 @@ int em28xx_audio_setup(struct em28xx *dev) > > /* Try to identify what audio processor we have */ > if (((vid == 0xffffffff) || (vid == 0x83847650)) && (feat == 0x6a90)) > - dev->audio_mode.ac97 = EM28XX_AC97_EM202; > - else if ((vid >> 8) == 0x838476) > - dev->audio_mode.ac97 = EM28XX_AC97_SIGMATEL; > - > -init_audio: > - /* Reports detected AC97 processor */ > - switch (dev->audio_mode.ac97) { > - case EM28XX_NO_AC97: > - em28xx_info("No AC97 audio processor\n"); > - break; > - case EM28XX_AC97_EM202: > em28xx_info("Empia 202 AC97 audio processor detected\n"); > - break; > - case EM28XX_AC97_SIGMATEL: > + else if ((vid >> 8) == 0x838476) > em28xx_info("Sigmatel audio processor detected (stac 97%02x)\n", > vid & 0xff); > - break; > - case EM28XX_AC97_OTHER: > + else > em28xx_warn("Unknown AC97 audio processor detected!\n"); > - break; > - default: > - break; > - } > > +init_audio: > return em28xx_audio_analog_set(dev); > } > EXPORT_SYMBOL_GPL(em28xx_audio_setup); > diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c > index 3284de9..c4e1364 100644 > --- a/drivers/media/usb/em28xx/em28xx-video.c > +++ b/drivers/media/usb/em28xx/em28xx-video.c > @@ -2384,7 +2384,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) > __func__, ret); > goto unregister_dev; > } > - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { > + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { > v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, > V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); > v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, > diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h > index 857ad0c..3108eee 100644 > --- a/drivers/media/usb/em28xx/em28xx.h > +++ b/drivers/media/usb/em28xx/em28xx.h > @@ -300,17 +300,6 @@ enum enum28xx_itype { > EM28XX_RADIO, > }; > > -enum em28xx_ac97_mode { > - EM28XX_NO_AC97 = 0, > - EM28XX_AC97_EM202, > - EM28XX_AC97_SIGMATEL, > - EM28XX_AC97_OTHER, > -}; > - > -struct em28xx_audio_mode { > - enum em28xx_ac97_mode ac97; > -}; > - > enum em28xx_int_audio_type { > EM28XX_INT_AUDIO_NONE = 0, > EM28XX_INT_AUDIO_AC97, > @@ -627,8 +616,6 @@ struct em28xx { > > u32 i2s_speed; /* I2S speed for audio digital stream */ > > - struct em28xx_audio_mode audio_mode; > - > int tuner_type; /* type of the tuner */ > > /* i2c i/o */ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Am 23.09.2014 um 02:02 schrieb Mauro Carvalho Chehab: > Em Sat, 13 Sep 2014 10:52:22 +0200 > Frank Schäfer <fschaefer.oss@googlemail.com> escreveu: > >> Now that we have enum em28xx_int_audio (none/i2s/ac97), it is no longer >> necessary to check dev->audio_mode.ac97 to determine the type of internal audio connection. >> There is also no need to save the type of the detected AC97 chip. > Removing the AC97 chip is a bad idea, as the mux of each AC97 device > is different. > > I don't remember anymore what device comes with the sigmatel chips, > but it does have a different mixer than em202. The logic to set it > different is not there basically for two reasons: > > 1) I don't have the device with sigmatel (I think someone borrowed it to me > at that time, and for a very limited period of time); > > 2) there's a hole ac97 support at /sound. The idea is to re-use it instead > of reinventing the wheel, but that requires time and a few different AC97 > setups. 1.) WHICH devices to you think need AC97 chip type specific code ? 2.) WHEN are you going to implement it ? It's just a big dead ugly chunk of code, which causes confusion. So please, let's simplify the code. If we really need to distinguish between AC97 chips one day, we can reintroduce it again. Please note that I'm not removing the AC97 chip type detection, so we are not loosing any information that might be useful in the future. > Btw, there are other em28xx devices with other non-em202 AC97 chips out > there, with different settings (and even different sampling rates). > Those AC97 devices are generally found at the "grabber" devices. I know. The VAD Laplace webcam is one of them. And the current audio code is broken for it. But the reason for that isn't that we do not distinguish enough between AC97 chips. The reason for that is, that we touch AC97 _at_all_ for USB audio class devices, which is evil, unnecessary and therefore also not done by the Windows driver. The situation is of course different for devices with usb vendor class audio (em28xx-alsa). But that's a separate issue which has nothing to do with this patch... ;-) Regards, Frank > > Regards, > Mauro > >> So replce the remaining checks of dev->audio_mode.ac97 with equivalent checks >> of dev->int_audio_type and get rid of struct em28xx_ac97_mode and finally the >> whole struct em28xx_audio_mode. >> >> Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> >> --- >> drivers/media/usb/em28xx/em28xx-audio.c | 2 +- >> drivers/media/usb/em28xx/em28xx-core.c | 36 ++++++--------------------------- >> drivers/media/usb/em28xx/em28xx-video.c | 2 +- >> drivers/media/usb/em28xx/em28xx.h | 13 ------------ >> 4 files changed, 8 insertions(+), 45 deletions(-) >> >> diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c >> index 90c7a83..c3a4224 100644 >> --- a/drivers/media/usb/em28xx/em28xx-audio.c >> +++ b/drivers/media/usb/em28xx/em28xx-audio.c >> @@ -933,7 +933,7 @@ static int em28xx_audio_init(struct em28xx *dev) >> >> INIT_WORK(&adev->wq_trigger, audio_trigger); >> >> - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { >> + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { >> em28xx_cvol_new(card, dev, "Video", AC97_VIDEO); >> em28xx_cvol_new(card, dev, "Line In", AC97_LINE); >> em28xx_cvol_new(card, dev, "Phone", AC97_PHONE); >> diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c >> index ed83e4e..7464e70 100644 >> --- a/drivers/media/usb/em28xx/em28xx-core.c >> +++ b/drivers/media/usb/em28xx/em28xx-core.c >> @@ -405,12 +405,8 @@ static int em28xx_set_audio_source(struct em28xx *dev) >> return ret; >> msleep(5); >> >> - switch (dev->audio_mode.ac97) { >> - case EM28XX_NO_AC97: >> - break; >> - default: >> + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) >> ret = set_ac97_input(dev); >> - } >> >> return ret; >> } >> @@ -439,7 +435,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) >> /* It is assumed that all devices use master volume for output. >> It would be possible to use also line output. >> */ >> - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { >> + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { >> /* Mute all outputs */ >> for (i = 0; i < ARRAY_SIZE(outputs); i++) { >> ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000); >> @@ -462,7 +458,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) >> ret = em28xx_set_audio_source(dev); >> >> /* Sets volume */ >> - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { >> + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { >> int vol; >> >> em28xx_write_ac97(dev, AC97_POWERDOWN, 0x4200); >> @@ -544,14 +540,11 @@ int em28xx_audio_setup(struct em28xx *dev) >> em28xx_info("I2S Audio (%d sample rate(s))\n", >> i2s_samplerates); >> /* Skip the code that does AC97 vendor detection */ >> - dev->audio_mode.ac97 = EM28XX_NO_AC97; >> goto init_audio; >> } else { >> dev->int_audio_type = EM28XX_INT_AUDIO_AC97; >> } >> >> - dev->audio_mode.ac97 = EM28XX_AC97_OTHER; >> - >> vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1); >> if (vid1 < 0) { >> /* >> @@ -560,7 +553,6 @@ int em28xx_audio_setup(struct em28xx *dev) >> * CHIPCFG register, even not having an AC97 chip >> */ >> em28xx_warn("AC97 chip type couldn't be determined\n"); >> - dev->audio_mode.ac97 = EM28XX_NO_AC97; >> if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) >> dev->usb_audio_type = EM28XX_USB_AUDIO_NONE; >> dev->int_audio_type = EM28XX_INT_AUDIO_NONE; >> @@ -582,30 +574,14 @@ int em28xx_audio_setup(struct em28xx *dev) >> >> /* Try to identify what audio processor we have */ >> if (((vid == 0xffffffff) || (vid == 0x83847650)) && (feat == 0x6a90)) >> - dev->audio_mode.ac97 = EM28XX_AC97_EM202; >> - else if ((vid >> 8) == 0x838476) >> - dev->audio_mode.ac97 = EM28XX_AC97_SIGMATEL; >> - >> -init_audio: >> - /* Reports detected AC97 processor */ >> - switch (dev->audio_mode.ac97) { >> - case EM28XX_NO_AC97: >> - em28xx_info("No AC97 audio processor\n"); >> - break; >> - case EM28XX_AC97_EM202: >> em28xx_info("Empia 202 AC97 audio processor detected\n"); >> - break; >> - case EM28XX_AC97_SIGMATEL: >> + else if ((vid >> 8) == 0x838476) >> em28xx_info("Sigmatel audio processor detected (stac 97%02x)\n", >> vid & 0xff); >> - break; >> - case EM28XX_AC97_OTHER: >> + else >> em28xx_warn("Unknown AC97 audio processor detected!\n"); >> - break; >> - default: >> - break; >> - } >> >> +init_audio: >> return em28xx_audio_analog_set(dev); >> } >> EXPORT_SYMBOL_GPL(em28xx_audio_setup); >> diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c >> index 3284de9..c4e1364 100644 >> --- a/drivers/media/usb/em28xx/em28xx-video.c >> +++ b/drivers/media/usb/em28xx/em28xx-video.c >> @@ -2384,7 +2384,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) >> __func__, ret); >> goto unregister_dev; >> } >> - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { >> + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { >> v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, >> V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); >> v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, >> diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h >> index 857ad0c..3108eee 100644 >> --- a/drivers/media/usb/em28xx/em28xx.h >> +++ b/drivers/media/usb/em28xx/em28xx.h >> @@ -300,17 +300,6 @@ enum enum28xx_itype { >> EM28XX_RADIO, >> }; >> >> -enum em28xx_ac97_mode { >> - EM28XX_NO_AC97 = 0, >> - EM28XX_AC97_EM202, >> - EM28XX_AC97_SIGMATEL, >> - EM28XX_AC97_OTHER, >> -}; >> - >> -struct em28xx_audio_mode { >> - enum em28xx_ac97_mode ac97; >> -}; >> - >> enum em28xx_int_audio_type { >> EM28XX_INT_AUDIO_NONE = 0, >> EM28XX_INT_AUDIO_AC97, >> @@ -627,8 +616,6 @@ struct em28xx { >> >> u32 i2s_speed; /* I2S speed for audio digital stream */ >> >> - struct em28xx_audio_mode audio_mode; >> - >> int tuner_type; /* type of the tuner */ >> >> /* i2c i/o */ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/usb/em28xx/em28xx-audio.c b/drivers/media/usb/em28xx/em28xx-audio.c index 90c7a83..c3a4224 100644 --- a/drivers/media/usb/em28xx/em28xx-audio.c +++ b/drivers/media/usb/em28xx/em28xx-audio.c @@ -933,7 +933,7 @@ static int em28xx_audio_init(struct em28xx *dev) INIT_WORK(&adev->wq_trigger, audio_trigger); - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { em28xx_cvol_new(card, dev, "Video", AC97_VIDEO); em28xx_cvol_new(card, dev, "Line In", AC97_LINE); em28xx_cvol_new(card, dev, "Phone", AC97_PHONE); diff --git a/drivers/media/usb/em28xx/em28xx-core.c b/drivers/media/usb/em28xx/em28xx-core.c index ed83e4e..7464e70 100644 --- a/drivers/media/usb/em28xx/em28xx-core.c +++ b/drivers/media/usb/em28xx/em28xx-core.c @@ -405,12 +405,8 @@ static int em28xx_set_audio_source(struct em28xx *dev) return ret; msleep(5); - switch (dev->audio_mode.ac97) { - case EM28XX_NO_AC97: - break; - default: + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) ret = set_ac97_input(dev); - } return ret; } @@ -439,7 +435,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) /* It is assumed that all devices use master volume for output. It would be possible to use also line output. */ - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { /* Mute all outputs */ for (i = 0; i < ARRAY_SIZE(outputs); i++) { ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000); @@ -462,7 +458,7 @@ int em28xx_audio_analog_set(struct em28xx *dev) ret = em28xx_set_audio_source(dev); /* Sets volume */ - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { int vol; em28xx_write_ac97(dev, AC97_POWERDOWN, 0x4200); @@ -544,14 +540,11 @@ int em28xx_audio_setup(struct em28xx *dev) em28xx_info("I2S Audio (%d sample rate(s))\n", i2s_samplerates); /* Skip the code that does AC97 vendor detection */ - dev->audio_mode.ac97 = EM28XX_NO_AC97; goto init_audio; } else { dev->int_audio_type = EM28XX_INT_AUDIO_AC97; } - dev->audio_mode.ac97 = EM28XX_AC97_OTHER; - vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1); if (vid1 < 0) { /* @@ -560,7 +553,6 @@ int em28xx_audio_setup(struct em28xx *dev) * CHIPCFG register, even not having an AC97 chip */ em28xx_warn("AC97 chip type couldn't be determined\n"); - dev->audio_mode.ac97 = EM28XX_NO_AC97; if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) dev->usb_audio_type = EM28XX_USB_AUDIO_NONE; dev->int_audio_type = EM28XX_INT_AUDIO_NONE; @@ -582,30 +574,14 @@ int em28xx_audio_setup(struct em28xx *dev) /* Try to identify what audio processor we have */ if (((vid == 0xffffffff) || (vid == 0x83847650)) && (feat == 0x6a90)) - dev->audio_mode.ac97 = EM28XX_AC97_EM202; - else if ((vid >> 8) == 0x838476) - dev->audio_mode.ac97 = EM28XX_AC97_SIGMATEL; - -init_audio: - /* Reports detected AC97 processor */ - switch (dev->audio_mode.ac97) { - case EM28XX_NO_AC97: - em28xx_info("No AC97 audio processor\n"); - break; - case EM28XX_AC97_EM202: em28xx_info("Empia 202 AC97 audio processor detected\n"); - break; - case EM28XX_AC97_SIGMATEL: + else if ((vid >> 8) == 0x838476) em28xx_info("Sigmatel audio processor detected (stac 97%02x)\n", vid & 0xff); - break; - case EM28XX_AC97_OTHER: + else em28xx_warn("Unknown AC97 audio processor detected!\n"); - break; - default: - break; - } +init_audio: return em28xx_audio_analog_set(dev); } EXPORT_SYMBOL_GPL(em28xx_audio_setup); diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index 3284de9..c4e1364 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -2384,7 +2384,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) __func__, ret); goto unregister_dev; } - if (dev->audio_mode.ac97 != EM28XX_NO_AC97) { + if (dev->int_audio_type == EM28XX_INT_AUDIO_AC97) { v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops, diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h index 857ad0c..3108eee 100644 --- a/drivers/media/usb/em28xx/em28xx.h +++ b/drivers/media/usb/em28xx/em28xx.h @@ -300,17 +300,6 @@ enum enum28xx_itype { EM28XX_RADIO, }; -enum em28xx_ac97_mode { - EM28XX_NO_AC97 = 0, - EM28XX_AC97_EM202, - EM28XX_AC97_SIGMATEL, - EM28XX_AC97_OTHER, -}; - -struct em28xx_audio_mode { - enum em28xx_ac97_mode ac97; -}; - enum em28xx_int_audio_type { EM28XX_INT_AUDIO_NONE = 0, EM28XX_INT_AUDIO_AC97, @@ -627,8 +616,6 @@ struct em28xx { u32 i2s_speed; /* I2S speed for audio digital stream */ - struct em28xx_audio_mode audio_mode; - int tuner_type; /* type of the tuner */ /* i2c i/o */
Now that we have enum em28xx_int_audio (none/i2s/ac97), it is no longer necessary to check dev->audio_mode.ac97 to determine the type of internal audio connection. There is also no need to save the type of the detected AC97 chip. So replce the remaining checks of dev->audio_mode.ac97 with equivalent checks of dev->int_audio_type and get rid of struct em28xx_ac97_mode and finally the whole struct em28xx_audio_mode. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> --- drivers/media/usb/em28xx/em28xx-audio.c | 2 +- drivers/media/usb/em28xx/em28xx-core.c | 36 ++++++--------------------------- drivers/media/usb/em28xx/em28xx-video.c | 2 +- drivers/media/usb/em28xx/em28xx.h | 13 ------------ 4 files changed, 8 insertions(+), 45 deletions(-)