@@ -513,7 +513,7 @@ irqreturn_t ath_isr(int irq, void *dev)
* touch anything. Note this can happen early
* on if the IRQ is shared.
*/
- if (test_bit(ATH_OP_INVALID, &common->op_flags))
+ if (!ah || test_bit(ATH_OP_INVALID, &common->op_flags))
return IRQ_NONE;
/* shared irq, not for us */
@@ -4921,7 +4921,7 @@ static void brcmf_count_20mhz_channels(struct brcmf_cfg80211_info *cfg,
struct brcmu_chan ch;
int i;
- for (i = 0; i <= total; i++) {
+ for (i = 0; i < total; i++) {
ch.chspec = (u16)le32_to_cpu(chlist->element[i]);
cfg->d11inf.decchspec(&ch);
@@ -501,9 +501,13 @@ static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
targets->sens_res =
be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A_ATQA]);
targets->sel_res = skb->data[MICROREAD_EMCF_A_SAK];
- memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
- skb->data[MICROREAD_EMCF_A_LEN]);
targets->nfcid1_len = skb->data[MICROREAD_EMCF_A_LEN];
+ if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+ r = -EINVAL;
+ goto exit_free;
+ }
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A_UID],
+ targets->nfcid1_len);
break;
case MICROREAD_GATE_ID_MREAD_ISO_A_3:
targets->supported_protocols =
@@ -511,9 +515,13 @@ static void microread_target_discovered(struct nfc_hci_dev *hdev, u8 gate,
targets->sens_res =
be16_to_cpu(*(u16 *)&skb->data[MICROREAD_EMCF_A3_ATQA]);
targets->sel_res = skb->data[MICROREAD_EMCF_A3_SAK];
- memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
- skb->data[MICROREAD_EMCF_A3_LEN]);
targets->nfcid1_len = skb->data[MICROREAD_EMCF_A3_LEN];
+ if (targets->nfcid1_len > sizeof(targets->nfcid1)) {
+ r = -EINVAL;
+ goto exit_free;
+ }
+ memcpy(targets->nfcid1, &skb->data[MICROREAD_EMCF_A3_UID],
+ targets->nfcid1_len);
break;
case MICROREAD_GATE_ID_MREAD_ISO_B:
targets->supported_protocols = NFC_PROTO_ISO14443_B_MASK;
@@ -2,7 +2,8 @@
# Makefile for ST21NFCA HCI based NFC driver
#
-st21nfca_i2c-objs = i2c.o
+st21nfca_hci-objs = st21nfca.o st21nfca_dep.o
+obj-$(CONFIG_NFC_ST21NFCA) += st21nfca_hci.o
-obj-$(CONFIG_NFC_ST21NFCA) += st21nfca.o st21nfca_dep.o
+st21nfca_i2c-objs = i2c.o
obj-$(CONFIG_NFC_ST21NFCA_I2C) += st21nfca_i2c.o
@@ -2,7 +2,8 @@
# Makefile for ST21NFCB NCI based NFC driver
#
-st21nfcb_i2c-objs = i2c.o
+st21nfcb_nci-objs = ndlc.o st21nfcb.o
+obj-$(CONFIG_NFC_ST21NFCB) += st21nfcb_nci.o
-obj-$(CONFIG_NFC_ST21NFCB) += st21nfcb.o ndlc.o
+st21nfcb_i2c-objs = i2c.o
obj-$(CONFIG_NFC_ST21NFCB_I2C) += st21nfcb_i2c.o
@@ -54,7 +54,7 @@ static int rfkill_gpio_set_power(void *data, bool blocked)
if (blocked && !IS_ERR(rfkill->clk) && rfkill->clk_enabled)
clk_disable(rfkill->clk);
- rfkill->clk_enabled = blocked;
+ rfkill->clk_enabled = !blocked;
return 0;
}