b/arch/arm/plat-omap/include/mach/omap-serial.h
new file mode 100644
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-serial.h
+ *
+ * Driver for OMAP3430 UART controller.
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * Authors:
+ * Thara Gopinath <thara@ti.com>
+ * Govindraj R <govindraj.raja@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+/* TI OMAP CONSOLE */
+#define PORT_OMAP 86
+
+#define DRIVER_NAME "omap-hsuart"
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+#define OMAP_MDR1_DISABLE 0x07
+#define OMAP_MDR1_MODE13X 0x03
+#define OMAP_MDR1_MODE16X 0x00
+#define OMAP_MODE13X_SPEED 230400
+#endif
+
+#define CONSOLE_NAME "console="
+
+#define UART_CLK (48000000)
+#define QUART_CLK (1843200)
+
+/* UART NUMBERS */
+#define UART1 (0x0)
+#define UART2 (0x1)
+#define UART3 (0x2)
+#define QUART (0x3)
+
+#ifdef CONFIG_MACH_OMAP_ZOOM2
+#define MAX_UARTS QUART
+#else
+#define MAX_UARTS UART3
+#endif
+
+#define UART_BASE(uart_no) (uart_no == UART1) ? OMAP_UART1_BASE :\
+ (uart_no == UART2) ? OMAP_UART2_BASE :\
+ OMAP_UART3_BASE
+
+#define UART_MODULE_BASE(uart_no) (UART1 == uart_no ? \
+ IO_ADDRESS(OMAP_UART1_BASE) :\
+ (UART2 == uart_no ? \
+ IO_ADDRESS(OMAP_UART2_BASE) :\
+ IO_ADDRESS(OMAP_UART3_BASE)))
+extern unsigned int fcr[MAX_UARTS];
+extern char *saved_command_line;
+
+struct plat_serialomap_port {
+ void __iomem *membase; /* ioremap cookie or NULL */
+ resource_size_t mapbase; /* resource base */
+ unsigned int irq; /* interrupt number */
+ unsigned char regshift; /* register shift */
+ upf_t flags; /* UPF_* flags */
+ void *private_data;
+};
+
+#endif /* __OMAP_SERIAL_H__ */
@@ -1359,6 +1359,98 @@ config SERIAL_OF_PLATFORM
Currently, only 8250 compatible ports are supported, but
others can easily be added.
+config SERIAL_OMAP
+ bool "OMAP serial port support"
+ depends on ARM && ARCH_OMAP
+ select SERIAL_CORE
+ help
+ If you have a machine based on an Texas Instruments OMAP CPU you
+ can enable its onboard serial ports by enabling this option.
+
+config SERIAL_OMAP_CONSOLE
+ bool "Console on OMAP serial port"
+ depends on SERIAL_OMAP
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the Texas Instruments OMAP
+ CPU you can make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_OMAP_DMA_UART1
+ bool "UART1 DMA support"
+ depends on SERIAL_OMAP
+ help
+ If you have enabled the serial port on the Texas Instruments OMAP
+ CPU you can enable the DMA transfer on UART 1 by answering
+ to this option.
+
+config SERIAL_OMAP_UART1_RXDMA_TIMEOUT
+ int "Timeout value for RX DMA in microseconds"
+ depends on SERIAL_OMAP_DMA_UART1
+ default "1"
+ help
+ Set the timeout value in which you want the data pulled by RX dma to
+ be passed to the tty framework.
+
+config SERIAL_OMAP_UART1_RXDMA_BUFSIZE
+ int "DMA buffer size for RX in bytes"
+ depends on SERIAL_OMAP_DMA_UART1
+ default "4096"
+ help
+ Set the dma buffer size for UART Rx
+
+config SERIAL_OMAP_DMA_UART2
+ bool "UART2 DMA support"
+ depends on SERIAL_OMAP
+ help
+ If you have enabled the serial port on the Texas Instruments OMAP
+ CPU you can enable the DMA transfer on UART 2 by answering
+ to this option.
+
+config SERIAL_OMAP_UART2_RXDMA_TIMEOUT
+ int "Timeout value for RX DMA in microseconds"
+ depends on SERIAL_OMAP_DMA_UART2
+ default "1"
+ help
+ Set the timeout value in which you want the data pulled by RX dma to
+ be passed to the tty framework.
+
+config SERIAL_OMAP_UART2_RXDMA_BUFSIZE
+ int "DMA buffer size for RX in bytes"
+ depends on SERIAL_OMAP_DMA_UART2
+ default "4096"
+ help
+ Set the dma buffer size for UART Rx
+
+config SERIAL_OMAP_DMA_UART3
+ bool "UART3 DMA support"
+ depends on SERIAL_OMAP
+ help
+ If you have enabled the serial port on the Texas Instruments OMAP
+ CPU you can enable the DMA transfer on UART 3 by answering
+ to this option.
+
+config SERIAL_OMAP_UART3_RXDMA_TIMEOUT
+ int "Timeout value for RX DMA in microseconds"
+ depends on SERIAL_OMAP_DMA_UART3
+ default "1"
+ help
+ Set the timeout value in which you want the data pulled by RX dma to
+ be passed to the tty framework.
+
+config SERIAL_OMAP_UART3_RXDMA_BUFSIZE
+ int "DMA buffer size for RX in bytes"
+ depends on SERIAL_OMAP_DMA_UART3
+ default "4096"
+ help
+ Set the dma buffer size for UART Rx
+
config SERIAL_OF_PLATFORM_NWPSERIAL
tristate "NWP serial port driver"
depends on PPC_OF && PPC_DCR
@@ -79,3 +79,4 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
+obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
new file mode 100644
@@ -0,0 +1,1431 @@
+/*
+ * drivers/serial/omap-serial.c
+ *
+ * Driver for OMAP3430 UART controller.
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * Authors:
+ * Thara Gopinath <thara@ti.com>
+ * Govindraj R <govindraj.raja@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/serial_reg.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <mach/dma.h>
+#include <mach/dmtimer.h>
+#include <mach/omap-serial.h>
+
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+#define DPRINTK(x...)
+#endif
+
+static u8 uart_dma_tx[MAX_UARTS + 1] =
+ {OMAP24XX_DMA_UART1_TX, OMAP24XX_DMA_UART2_TX, OMAP24XX_DMA_UART3_TX};
+static u8 uart_dma_rx[MAX_UARTS + 1] =
+ {OMAP24XX_DMA_UART1_RX, OMAP24XX_DMA_UART2_RX, OMAP24XX_DMA_UART3_RX};
+
+struct uart_omap_dma {
+ int rx_dma_channel;
+ int tx_dma_channel;
+ dma_addr_t rx_buf_dma_phys; /* Physical adress of RX DMA buffer */
+ dma_addr_t tx_buf_dma_phys; /* Physical adress of TX DMA buffer */
+ /*
+ * Buffer for rx dma.It is not required for tx because the buffer
+ * comes from port structure
+ */
+ unsigned char *rx_buf;
+ unsigned int prev_rx_dma_pos;
+ int tx_buf_size;
+ int tx_dma_state;
+ int rx_dma_state;
+ spinlock_t tx_lock;
+ spinlock_t rx_lock;
+ struct timer_list rx_timer;/* timer to poll activity on rx dma */
+ int rx_buf_size;
+ int rx_timeout;
+};
+
+struct uart_omap_port {
+ struct uart_port port;
+ struct uart_omap_dma uart_dma;
+ struct platform_device *pdev;
+
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ int use_dma;
+ int is_buf_dma_alloced;
+ /*
+ * Some bits in registers are cleared on a read, so they must
+ * be saved whenever the register is read but the bits will not
+ * be immediately processed.
+ */
+ unsigned int lsr_break_flag;
+#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
+ unsigned char msr_saved_flags;
+ char name[20];
+ spinlock_t uart_lock;
+};
+
+static struct uart_omap_port *ui[MAX_UARTS + 1];
+unsigned int fcr[MAX_UARTS];
+unsigned long up_activity;
+
+/* Forward declaration of dma callback functions */
+static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
+#ifdef DEBUG
+static void serial_omap_display_reg(struct uart_port *port);
+#endif
+static void serial_omap_rx_timeout(unsigned long uart_no);
+static void serial_omap_start_rxdma(struct uart_omap_port *up);
+
+int console_detect(char *str)
+{
+ char *next, *start = NULL;
+ int i;
+
+ i = strlen(CONSOLE_NAME);
+ next = saved_command_line;
+
+ while ((next = strchr(next, 'c')) != NULL) {
+ if (!strncmp(next, CONSOLE_NAME, i)) {
+ start = next;
+ break;
+ } else
+ next++;
+ }
+ if (!start)
+ return -EPERM;
+ i = 0;
+ start = strchr(start, '=') + 1;
+ while (*start != ',') {
+ str[i++] = *start++;
+ if (i > 6) {
+ printk(KERN_INFO "Invalid Console Name\n");
+ return -EPERM;
+ }
+ }
+ str[i] = '\0';
+ return 0;
+}
+
+static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
+{
+ offset <<= up->port.regshift;
+ if (up->pdev->id != 4)
+ return readb(up->port.membase + offset);
+ else
+ return readw(up->port.membase + offset);
+}
+
+static inline void serial_out(struct uart_omap_port *up, int offset, int value)
+{
+ offset <<= up->port.regshift;
+ if (up->pdev->id != 4)
+ writeb(value, up->port.membase + offset);
+ else
+ writew(value, up->port.membase + offset);
+}
+
+static inline void serial_omap_clear_fifos(struct uart_omap_port *p)
+{
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(p, UART_FCR, 0);
+ fcr[p->pdev->id - 1] = 0;
+}
+
+/*
+ * We have written our own function to get the divisor so as to support
+ * 13x mode.
+ */
+static unsigned int
+serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
+{
+ unsigned int divisor;
+ if (baud > OMAP_MODE13X_SPEED && baud != 3000000)
+ divisor = 13;
+ else
+ divisor = 16;
+ return port->uartclk/(baud * divisor);
+}
+
+static void serial_omap_stop_rxdma(struct uart_omap_port *up)
+{
+ if (up->uart_dma.rx_dma_state) {
+ del_timer_sync(&up->uart_dma.rx_timer);
+ omap_stop_dma(up->uart_dma.rx_dma_channel);
+ omap_free_dma(up->uart_dma.rx_dma_channel);
+ up->uart_dma.rx_dma_channel = 0xFF;
+ up->uart_dma.rx_dma_state = 0x0;
+ }
+}
+
+static void serial_omap_enable_ms(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+
+ DPRINTK("serial_omap_enable_ms+%d\n", up->pdev->id);
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void serial_omap_stop_tx(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ if (up->use_dma) {
+ if (up->uart_dma.tx_dma_channel != 0xFF) {
+ /*
+ * Check if dma is still active . If yes do nothing,
+ * return. Else stop dma
+ */
+ int status = omap_readl(OMAP34XX_DMA4_BASE +
+ OMAP_DMA4_CCR(up->uart_dma.tx_dma_channel));
+ if (status & (1 << 7))
+ return;
+ omap_stop_dma(up->uart_dma.tx_dma_channel);
+ omap_free_dma(up->uart_dma.tx_dma_channel);
+ up->uart_dma.tx_dma_channel = 0xFF;
+ }
+ }
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+#ifdef CONFIG_PM
+ if (!up->uart_dma.rx_dma_state) {
+ unsigned int tmp;
+ tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7) | (2 << 3);
+ serial_out(up, UART_OMAP_SYSC, tmp); /* smart-idle */
+ }
+#endif
+}
+
+static void serial_omap_stop_rx(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ serial_omap_stop_rxdma(up);
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+
+}
+
+static inline void receive_chars(struct uart_omap_port *up, int *status)
+{
+ struct tty_struct *tty = up->port.info->port.tty;
+ unsigned int ch, flag;
+ int max_count = 256;
+
+ do {
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ *status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+ if (*status & UART_LSR_BI)
+ flag = TTY_BREAK;
+ else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&up->port, ch))
+ goto ignore_char;
+
+ uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+
+ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+
+
+}
+
+static void transmit_chars(struct uart_omap_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_out(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial_omap_stop_tx(&up->port);
+ return;
+ }
+
+ count = up->port.fifosize / 4;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ serial_omap_stop_tx(&up->port);
+}
+
+static void serial_omap_start_tx(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+#ifdef CONFIG_PM
+ /* Disallow OCP bus idle. UART TX irqs are not seen during
+ * bus idle. Alternative is to set kernel timer at fifo
+ * drain rate.
+ */
+ unsigned int tmp;
+ tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7) | (1 << 3);
+ serial_out(up, UART_OMAP_SYSC, tmp); /* no-idle */
+#endif
+
+ if (up->use_dma && !(up->port.x_char)) {
+
+ struct circ_buf *xmit = &up->port.info->xmit;
+ unsigned int start = up->uart_dma.tx_buf_dma_phys +
+ (xmit->tail & (UART_XMIT_SIZE - 1));
+ if (uart_circ_empty(xmit) || up->uart_dma.tx_dma_state)
+ return;
+ spin_lock(&(up->uart_dma.tx_lock));
+ up->uart_dma.tx_dma_state = 1;
+ spin_unlock(&(up->uart_dma.tx_lock));
+
+ up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
+ /* It is a circular buffer. See if the buffer has wounded back.
+ * If yes it will have to be transferred in two separate dma
+ * transfers */
+ if (start + up->uart_dma.tx_buf_size >=
+ up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
+ up->uart_dma.tx_buf_size =
+ (up->uart_dma.tx_buf_dma_phys +
+ UART_XMIT_SIZE) - start;
+
+ if (up->uart_dma.tx_dma_channel == 0xFF)
+ omap_request_dma(uart_dma_tx[up->pdev->id-1],
+ "UART Tx DMA",
+ (void *)uart_tx_dma_callback, up,
+ &(up->uart_dma.tx_dma_channel));
+ omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
+ OMAP_DMA_AMODE_CONSTANT,
+ UART_BASE(up->pdev->id - 1), 0, 0);
+ omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
+ OMAP_DMA_AMODE_POST_INC, start, 0, 0);
+
+ omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
+ OMAP_DMA_DATA_TYPE_S8,
+ up->uart_dma.tx_buf_size, 1,
+ OMAP_DMA_SYNC_ELEMENT,
+ uart_dma_tx[(up->pdev->id)-1], 0);
+
+ omap_start_dma(up->uart_dma.tx_dma_channel);
+
+ } else if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static unsigned int check_modem_status(struct uart_omap_port *up)
+{
+ int status;
+ status = serial_in(up, UART_MSR);
+
+ status |= up->msr_saved_flags;
+ up->msr_saved_flags = 0;
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return status;
+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
+ up->port.info != NULL) {
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change
+ (&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change
+ (&up->port, status & UART_MSR_CTS);
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+ }
+
+ return status;
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
+{
+ struct uart_omap_port *up = dev_id;
+ unsigned int iir, lsr;
+
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ return IRQ_NONE;
+ lsr = serial_in(up, UART_LSR);
+ if ((iir & 0x4) && up->use_dma) {
+ up->ier &= ~UART_IER_RDI;
+ serial_out(up, UART_IER, up->ier);
+ serial_omap_start_rxdma(up);
+ } else if (lsr & UART_LSR_DR)
+ receive_chars(up, &lsr);
+ check_modem_status(up);
+ if ((lsr & UART_LSR_THRE) && (iir & 0x2))
+ transmit_chars(up);
+ up_activity = jiffies;
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int serial_omap_tx_empty(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ DPRINTK("serial_omap_tx_empty+%d\n", up->pdev->id);
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial_omap_get_mctrl(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned char status;
+ unsigned int ret;
+
+ status = check_modem_status(up);
+ DPRINTK("serial_omap_get_mctrl+%d\n", up->pdev->id);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned char mcr = 0;
+
+ DPRINTK("serial_omap_set_mctrl+%d\n", up->pdev->id);
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr |= up->mcr;
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial_omap_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned long flags;
+
+ DPRINTK("serial_omap_break_ctl+%d\n", up->pdev->id);
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serial_omap_startup(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned long flags;
+ int irq_flags = 0;
+ int retval;
+
+ /* Zoom2 has GPIO_102 connected to Serial device:
+ * Active High
+ */
+ if (up->port.flags & UPF_IOREMAP)
+ irq_flags |= IRQF_TRIGGER_HIGH;
+
+ if (up->port.flags & UPF_SHARE_IRQ)
+ irq_flags |= IRQF_SHARED;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(up->port.irq, serial_omap_irq, irq_flags,
+ up->name, up);
+ if (retval)
+ return retval;
+ DPRINTK("serial_omap_startup+%d\n", up->pdev->id);
+ /*
+ * Stop the baud clock and disable the UART. UART will be enabled
+ * back in set_termios. This is essential for DMA mode operations.
+ */
+ serial_out(up, UART_LCR, UART_LCR_DLAB);
+ serial_out(up, UART_DLL, 0);
+ serial_out(up, UART_DLM, 0);
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial_omap_clear_fifos(up);
+ serial_out(up, UART_SCR, 0x00);
+ /* For Hardware flow control */
+ serial_out(up, UART_MCR, 0x2);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+ /*
+ * Now, initialize the UART
+ */
+ serial_out(up, UART_LCR, UART_LCR_WLEN8);
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ if (!is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT1;
+ } else {
+ /*
+ * Most PC uarts need OUT2 raised to enable interrupts.
+ */
+ if (is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT2;
+ }
+ serial_omap_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ up->msr_saved_flags = 0;
+
+ if (up->port.flags & UPF_FOURPORT) {
+ unsigned int icp;
+ /*
+ * Enable interrupts on the AST Fourport board
+ */
+ icp = (up->port.iobase & 0xfe0) | 0x01f;
+ outb_p(0x80, icp);
+ (void) inb_p(icp);
+ }
+ if (up->use_dma) {
+ if (!up->is_buf_dma_alloced) {
+ free_page((unsigned long)up->port.info->xmit.buf);
+ up->port.info->xmit.buf = NULL;
+ up->port.info->xmit.buf = dma_alloc_coherent(NULL,
+ UART_XMIT_SIZE,
+ (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
+ 0);
+ up->is_buf_dma_alloced = 1;
+ }
+ init_timer(&(up->uart_dma.rx_timer));
+ up->uart_dma.rx_timer.function = serial_omap_rx_timeout;
+ up->uart_dma.rx_timer.data = up->pdev->id;
+ /* Currently the buffer size is 4KB. Can increase it later*/
+ up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
+ up->uart_dma.rx_buf_size,
+ (dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
+ }
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI;
+ serial_out(up, UART_IER, up->ier);
+
+ up_activity = jiffies;
+ return 0;
+}
+
+static void serial_omap_shutdown(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned long flags;
+
+ DPRINTK("serial_omap_shutdown+%d\n", up->pdev->id);
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_out(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ /* reset interrupts on the AST Fourport board */
+ inb((up->port.iobase & 0xfe0) | 0x1f);
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ up->port.mctrl &= ~TIOCM_OUT2;
+ serial_omap_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_omap_clear_fifos(up);
+
+ /*
+ * Read data port to reset things, and then free the irq
+ */
+ (void) serial_in(up, UART_RX);
+ if (up->use_dma) {
+ int tmp;
+ if (up->is_buf_dma_alloced) {
+ dma_free_coherent(up->port.dev,
+ UART_XMIT_SIZE,
+ up->port.info->xmit.buf,
+ up->uart_dma.tx_buf_dma_phys);
+ up->port.info->xmit.buf = NULL;
+ up->is_buf_dma_alloced = 0;
+ }
+ serial_omap_stop_rx(port);
+ dma_free_coherent(up->port.dev,
+ up->uart_dma.rx_buf_size,
+ up->uart_dma.rx_buf,
+ up->uart_dma.rx_buf_dma_phys);
+ up->uart_dma.rx_buf = NULL;
+ tmp = serial_in(up, UART_OMAP_SYSC) & 0x7;
+ serial_out(up, UART_OMAP_SYSC, tmp); /* force-idle */
+ }
+
+ free_irq(up->port.irq, up);
+}
+
+static void
+serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned char cval;
+ unsigned char efr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ serial_out(up, UART_LCR, UART_LCR_DLAB);
+ serial_out(up, UART_DLL, 0);
+ serial_out(up, UART_DLM, 0);
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
+ quot = serial_omap_get_divisor(port, baud);
+
+ if (up->use_dma)
+ fcr[up->pdev->id - 1] = UART_FCR_ENABLE_FIFO
+ | 0x1 << 6 | 0x1 << 4
+ | UART_FCR_DMA_SELECT;
+ else
+ fcr[up->pdev->id - 1] = UART_FCR_ENABLE_FIFO
+ | 0x1 << 6 | 0x1 << 4;
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characters to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+
+ if (termios->c_cflag & CRTSCTS)
+ efr |= (UART_EFR_CTS | UART_EFR_RTS);
+
+ serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
+ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+
+ serial_out(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ if (up->use_dma)
+ serial_out(up, UART_OMAP_SCR , ((1 << 6) | (1 << 7)));
+
+ serial_out(up, UART_LCR, 0xbf); /* Access EFR */
+ serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0x0); /* Access FCR */
+ serial_out(up, UART_FCR, fcr[up->pdev->id - 1]);
+ serial_out(up, UART_LCR, 0xbf); /* Access EFR */
+ serial_out(up, UART_EFR, efr);
+ serial_out(up, UART_LCR, cval); /* Restore LCR */
+
+ serial_omap_set_mctrl(&up->port, up->port.mctrl);
+ /*
+ * Clear all the status registers and RX register before
+ * enabling UART
+ */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ if (baud > 230400 && baud != 3000000)
+ serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
+ else if (baud == 3000000)
+ serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
+ else
+ serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ DPRINTK("serial_omap_set_termios+%d\n", up->pdev->id);
+#ifdef DEBUG
+ serial_omap_display_reg(port);
+#endif
+}
+
+static void
+serial_omap_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned char efr;
+ DPRINTK("serial_omap_pm+%d\n", up->pdev->id);
+ efr = serial_in(up, UART_EFR);
+ serial_out(up, UART_LCR, 0xBF);
+ serial_out(up, UART_EFR, efr | UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0);
+
+ serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
+ serial_out(up, UART_LCR, 0xBF);
+ serial_out(up, UART_EFR, efr);
+ serial_out(up, UART_LCR, 0);
+}
+
+static void serial_omap_release_port(struct uart_port *port)
+{
+ DPRINTK("serial_omap_release_port+\n");
+}
+
+static int serial_omap_request_port(struct uart_port *port)
+{
+ DPRINTK("serial_omap_request_port+\n");
+ return 0;
+}
+
+static void serial_omap_config_port(struct uart_port *port, int flags)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+
+ DPRINTK("serial_omap_config_port+%d\n", up->pdev->id);
+ up->port.type = PORT_OMAP;
+}
+
+static int
+serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* we don't want the core code to modify any port params */
+ DPRINTK("serial_omap_verify_port+\n");
+ return -EINVAL;
+}
+
+static const char *
+serial_omap_type(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+
+ DPRINTK("serial_omap_type+%d\n", up->pdev->id);
+ return up->name;
+}
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+
+static struct uart_omap_port *serial_omap_console_ports[4];
+
+static struct uart_driver serial_omap_reg;
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_omap_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ for (tmout = 1000000; tmout; tmout--) {
+ unsigned int msr = serial_in(up, UART_MSR);
+ up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
+ if (msr & UART_MSR_CTS)
+ break;
+ udelay(1);
+ }
+ }
+}
+
+static void serial_omap_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial_omap_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_omap_port *up = serial_omap_console_ports[co->index];
+ unsigned int ier;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+
+ uart_console_write(&up->port, s, count, serial_omap_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+ /*
+ * The receive handling will happen properly because the
+ * receive ready bit will still be set; it is not cleared
+ * on read. However, modem control will not, we must
+ * call it if we have saved something in the saved flags
+ * while processing with interrupts off.
+ */
+ if (up->msr_saved_flags)
+ check_modem_status(up);
+}
+
+static int __init
+serial_omap_console_setup(struct console *co, char *options)
+{
+ struct uart_omap_port *up;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int r;
+
+ if (serial_omap_console_ports[co->index] == NULL)
+ return -ENODEV;
+ up = serial_omap_console_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ r = uart_set_options(&up->port, co, baud, parity, bits, flow);
+
+ return r;
+}
+
+static struct console serial_omap_console = {
+ .name = "ttyS",
+ .write = serial_omap_console_write,
+ .device = uart_console_device,
+ .setup = serial_omap_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_omap_reg,
+};
+
+static void serial_omap_add_console_port(struct uart_omap_port *up)
+{
+ serial_omap_console_ports[up->pdev->id - 1] = up;
+}
+
+#define OMAP_CONSOLE (&serial_omap_console)
+
+#else
+
+#define OMAP_CONSOLE NULL
+
+static inline void serial_omap_add_console_port(struct uart_omap_port *up) {}
+
+#endif
+
+struct uart_ops serial_omap_pops = {
+ .tx_empty = serial_omap_tx_empty,
+ .set_mctrl = serial_omap_set_mctrl,
+ .get_mctrl = serial_omap_get_mctrl,
+ .stop_tx = serial_omap_stop_tx,
+ .start_tx = serial_omap_start_tx,
+ .stop_rx = serial_omap_stop_rx,
+ .enable_ms = serial_omap_enable_ms,
+ .break_ctl = serial_omap_break_ctl,
+ .startup = serial_omap_startup,
+ .shutdown = serial_omap_shutdown,
+ .set_termios = serial_omap_set_termios,
+ .pm = serial_omap_pm,
+ .type = serial_omap_type,
+ .release_port = serial_omap_release_port,
+ .request_port = serial_omap_request_port,
+ .config_port = serial_omap_config_port,
+ .verify_port = serial_omap_verify_port,
+};
+
+static struct uart_driver serial_omap_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "OMAP-SERIAL",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = 4,
+ .cons = OMAP_CONSOLE,
+};
+
+static int serial_omap_remove(struct platform_device *dev);
+
+static
+int serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct uart_omap_port *up = platform_get_drvdata(pdev);
+ unsigned int tmp;
+
+ if (up)
+ uart_suspend_port(&serial_omap_reg, &up->port);
+ if (up->use_dma) {
+ /*
+ * Silicon Errata 2.15 workaround.
+ * UART Module has to be put in force idle if it is
+ * configured in DMA mode and when there is no activity
+ * expected.
+ */
+ tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7);
+ serial_out(up, UART_OMAP_SYSC, tmp); /* force-idle */
+ }
+ return 0;
+}
+
+static int serial_omap_resume(struct platform_device *dev)
+{
+ struct uart_omap_port *up = platform_get_drvdata(dev);
+ if (up)
+ uart_resume_port(&serial_omap_reg, &up->port);
+
+ return 0;
+}
+
+static void serial_omap_rx_timeout(unsigned long uart_no)
+{
+ struct uart_omap_port *up = ui[uart_no - 1];
+ unsigned int curr_dma_pos;
+ curr_dma_pos = omap_readl(OMAP34XX_DMA4_BASE +
+ OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel));
+ if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
+ (curr_dma_pos == 0)) {
+ if (jiffies_to_msecs(jiffies - up_activity) < 10000) {
+ mod_timer(&up->uart_dma.rx_timer, jiffies +
+ usecs_to_jiffies(up->uart_dma.rx_timeout));
+ } else {
+ serial_omap_stop_rxdma(up);
+ up->ier |= UART_IER_RDI;
+ serial_out(up, UART_IER, up->ier);
+ }
+
+ return;
+ } else {
+ unsigned int curr_transmitted_size = curr_dma_pos -
+ up->uart_dma.prev_rx_dma_pos;
+ up->port.icount.rx += curr_transmitted_size;
+ tty_insert_flip_string(up->port.info->port.tty,
+ up->uart_dma.rx_buf +
+ (up->uart_dma.prev_rx_dma_pos -
+ up->uart_dma.rx_buf_dma_phys),
+ curr_transmitted_size);
+ tty_flip_buffer_push(up->port.info->port.tty);
+ up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
+ if (up->uart_dma.rx_buf_size +
+ up->uart_dma.rx_buf_dma_phys == curr_dma_pos)
+ serial_omap_start_rxdma(up);
+ else
+ mod_timer(&up->uart_dma.rx_timer, jiffies +
+ usecs_to_jiffies(up->uart_dma.rx_timeout));
+ up_activity = jiffies;
+
+ }
+}
+
+static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
+{
+ return;
+}
+
+static void serial_omap_start_rxdma(struct uart_omap_port *up)
+{
+#ifdef CONFIG_PM
+ /* Disallow OCP bus idle. UART TX irqs are not seen during
+ * bus idle. Alternative is to set kernel timer at fifo
+ * drain rate.
+ */
+ unsigned int tmp;
+ tmp = (serial_in(up, UART_OMAP_SYSC) & 0x7) | (1 << 3);
+ serial_out(up, UART_OMAP_SYSC, tmp); /* no-idle */
+#endif
+ if (up->uart_dma.rx_dma_channel == 0xFF) {
+ omap_request_dma(uart_dma_rx[up->pdev->id-1], "UART Rx DMA",
+ (void *)uart_rx_dma_callback, up,
+ &(up->uart_dma.rx_dma_channel));
+
+ omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
+ OMAP_DMA_AMODE_CONSTANT,
+ UART_BASE(up->pdev->id - 1), 0, 0);
+ omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
+ OMAP_DMA_AMODE_POST_INC,
+ up->uart_dma.rx_buf_dma_phys, 0, 0);
+ omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
+ OMAP_DMA_DATA_TYPE_S8,
+ up->uart_dma.rx_buf_size, 1,
+ OMAP_DMA_SYNC_ELEMENT,
+ uart_dma_rx[up->pdev->id-1], 0);
+ }
+ up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
+ omap_writel(0, OMAP34XX_DMA4_BASE
+ + OMAP_DMA4_CDAC(up->uart_dma.rx_dma_channel));
+ omap_start_dma(up->uart_dma.rx_dma_channel);
+ mod_timer(&up->uart_dma.rx_timer, jiffies +
+ usecs_to_jiffies(up->uart_dma.rx_timeout));
+ up->uart_dma.rx_dma_state = 1;
+}
+
+static void serial_omap_continue_tx(struct uart_omap_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int start = up->uart_dma.tx_buf_dma_phys
+ + (xmit->tail & (UART_XMIT_SIZE - 1));
+ if (uart_circ_empty(xmit))
+ return;
+
+ up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
+ /* It is a circular buffer. See if the buffer has wounded back.
+ * If yes it will have to be transferred in two separate dma
+ * transfers
+ */
+ if (start + up->uart_dma.tx_buf_size >=
+ up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
+ up->uart_dma.tx_buf_size =
+ (up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
+ omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
+ OMAP_DMA_AMODE_CONSTANT,
+ UART_BASE(up->pdev->id - 1), 0, 0);
+ omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
+ OMAP_DMA_AMODE_POST_INC, start, 0, 0);
+
+ omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
+ OMAP_DMA_DATA_TYPE_S8,
+ up->uart_dma.tx_buf_size, 1,
+ OMAP_DMA_SYNC_ELEMENT,
+ uart_dma_tx[(up->pdev->id)-1], 0);
+
+ omap_start_dma(up->uart_dma.tx_dma_channel);
+}
+
+static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)data;
+ struct circ_buf *xmit = &up->port.info->xmit;
+ xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \
+ (UART_XMIT_SIZE - 1);
+ up->port.icount.tx += up->uart_dma.tx_buf_size;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit)) {
+
+ spin_lock(&(up->uart_dma.tx_lock));
+ serial_omap_stop_tx(&up->port);
+ up->uart_dma.tx_dma_state = 0;
+ spin_unlock(&(up->uart_dma.tx_lock));
+ } else {
+ omap_stop_dma(up->uart_dma.tx_dma_channel);
+ serial_omap_continue_tx(up);
+ }
+ up_activity = jiffies;
+ return;
+}
+
+static int serial_omap_probe(struct platform_device *pdev)
+{
+ struct uart_omap_port *up;
+ struct resource *mem, *irq;
+ int ret = -ENOSPC;
+ char str[7];
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ return -ENODEV;
+ }
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -ENODEV;
+ }
+
+ ret = (int) request_mem_region(mem->start, (mem->end - mem->start) + 1,
+ pdev->dev.driver->name);
+ if (!ret) {
+ dev_err(&pdev->dev, "memory region already claimed\n");
+ return -EBUSY;
+ }
+ up = kzalloc(sizeof(*up), GFP_KERNEL);
+ if (up == NULL) {
+ ret = -ENOMEM;
+ goto do_release_region;
+ }
+ sprintf(up->name, "OMAP UART%d", pdev->id);
+
+ up->pdev = pdev;
+ up->port.dev = &pdev->dev;
+ up->port.type = PORT_OMAP;
+ up->port.iotype = UPIO_MEM;
+ up->port.mapbase = mem->start;
+ up->port.irq = irq->start;
+ up->port.fifosize = 64;
+ up->port.ops = &serial_omap_pops;
+ up->port.line = pdev->id - 1;
+ if ((pdev->id-1) == QUART) {
+ up->port.membase = ioremap_nocache(mem->start, 0x16 << 1);
+ up->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+ up->port.uartclk = QUART_CLK;
+ up->port.regshift = 1;
+ } else {
+ up->port.membase = (void *) IO_ADDRESS(mem->start);
+ up->port.flags = UPF_BOOT_AUTOCONF;
+ up->port.uartclk = UART_CLK;
+ up->port.regshift = 2;
+ }
+#ifdef CONFIG_PM
+ up->port.flags |= UPF_SHARE_IRQ;
+#endif
+ if ((pdev->id-1) == UART1) {
+#ifdef CONFIG_SERIAL_OMAP_DMA_UART1
+ up->use_dma = 1;
+ up->uart_dma.rx_buf_size =
+ CONFIG_SERIAL_OMAP_UART1_RXDMA_BUFSIZE;
+ up->uart_dma.rx_timeout =
+ CONFIG_SERIAL_OMAP_UART1_RXDMA_TIMEOUT;
+#endif
+ } else if ((pdev->id-1) == UART2) {
+#ifdef CONFIG_SERIAL_OMAP_DMA_UART2
+ up->use_dma = 1;
+ up->uart_dma.rx_buf_size =
+ CONFIG_SERIAL_OMAP_UART2_RXDMA_BUFSIZE;
+ up->uart_dma.rx_timeout =
+ CONFIG_SERIAL_OMAP_UART2_RXDMA_TIMEOUT;
+#endif
+ } else if ((pdev->id-1) == UART3) {
+#ifdef CONFIG_SERIAL_OMAP_DMA_UART3
+ up->use_dma = 1;
+ up->uart_dma.rx_buf_size =
+ CONFIG_SERIAL_OMAP_UART3_RXDMA_BUFSIZE;
+ up->uart_dma.rx_timeout =
+ CONFIG_SERIAL_OMAP_UART3_RXDMA_TIMEOUT;
+#endif
+ }
+ if (up->use_dma) {
+ spin_lock_init(&(up->uart_dma.tx_lock));
+ spin_lock_init(&(up->uart_dma.rx_lock));
+ up->uart_dma.tx_dma_channel = 0xFF;
+ up->uart_dma.rx_dma_channel = 0xFF;
+ }
+ if (console_detect(str)) {
+ pr_err("\n %s: Invalid console paramter...\n", __func__);
+ pr_err("\n %s: UART Driver Init Failed!\n", __func__);
+ return -EPERM;
+ }
+ fcr[pdev->id - 1] = 0;
+ ui[pdev->id - 1] = up;
+ serial_omap_add_console_port(up);
+
+ ret = uart_add_one_port(&serial_omap_reg, &up->port);
+ if (ret != 0)
+ goto do_release_region;
+
+ platform_set_drvdata(pdev, up);
+ return 0;
+do_release_region:
+ release_mem_region(mem->start, (mem->end - mem->start) + 1);
+ return ret;
+}
+
+static int serial_omap_remove(struct platform_device *dev)
+{
+ struct uart_omap_port *up = platform_get_drvdata(dev);
+ platform_set_drvdata(dev, NULL);
+ if (up) {
+ uart_remove_one_port(&serial_omap_reg, &up->port);
+ kfree(up);
+ }
+ return 0;
+}
+
+static struct platform_driver serial_omap_driver = {
+ .probe = serial_omap_probe,
+ .remove = serial_omap_remove,
+
+ .suspend = serial_omap_suspend,
+ .resume = serial_omap_resume,
+ .driver = {
+ .name = "omap-uart",
+ },
+};
+
+int __init serial_omap_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&serial_omap_reg);
+ if (ret != 0)
+ return ret;
+ ret = platform_driver_register(&serial_omap_driver);
+ if (ret != 0)
+ uart_unregister_driver(&serial_omap_reg);
+ return ret;
+}
+
+void __exit serial_omap_exit(void)
+{
+ platform_driver_unregister(&serial_omap_driver);
+ uart_unregister_driver(&serial_omap_reg);
+}
+
+#ifdef DEBUG
+static void serial_omap_display_reg(struct uart_port *port)
+{
+ struct uart_omap_port *up = (struct uart_omap_port *)port;
+ unsigned int lcr, efr, mcr, dll, dlh, xon1, xon2, xoff1, xoff2;
+ unsigned int tcr, tlr, uasr;
+ DPRINTK("Register dump for UART%d\n", up->pdev->id);
+ DPRINTK("IER_REG = 0x%x\n", serial_in(up, UART_IER));
+ DPRINTK("IIR_REG = 0x%x\n", serial_in(up, UART_IIR));
+ lcr = serial_in(up, UART_LCR);
+ DPRINTK("LCR_REG = 0x%x\n", lcr);
+ mcr = serial_in(up, UART_MCR);
+ DPRINTK("MCR_REG = 0x%x\n", mcr);
+ DPRINTK("LSR_REG = 0x%x\n", serial_in(up, UART_LSR));
+ DPRINTK("MSR_REG = 0x%x\n", serial_in(up, UART_MSR));
+ DPRINTK("SPR_REG = 0x%x\n", serial_in(up, UART_OMAP_SPR));
+ DPRINTK("MDR1_REG = 0x%x\n", serial_in(up, UART_OMAP_MDR1));
+ DPRINTK("MDR2_REG = 0x%x\n", serial_in(up, UART_OMAP_MDR2));
+ DPRINTK("SCR_REG = 0x%x\n", serial_in(up, UART_OMAP_SCR));
+ DPRINTK("SSR_REG = 0x%x\n", serial_in(up, UART_OMAP_SSR));
+ DPRINTK("MVR_REG = 0x%x\n", serial_in(up, UART_OMAP_MVER));
+ DPRINTK("SYSC_REG = 0x%x\n", serial_in(up, UART_OMAP_SYSC));
+ DPRINTK("SYSS_REG = 0x%x\n", serial_in(up, UART_OMAP_SYSS));
+ DPRINTK("WER_REG = 0x%x\n", serial_in(up, UART_OMAP_WER));
+
+ serial_out(up, UART_LCR, 0xBF);
+ dll = serial_in(up, UART_DLL);
+ dlh = serial_in(up, UART_DLM);
+ efr = serial_in(up, UART_EFR);
+ xon1 = serial_in(up, UART_XON1);
+ xon2 = serial_in(up, UART_XON2);
+
+ serial_out(up, UART_EFR, efr | UART_EFR_ECB);
+ serial_out(up, UART_LCR, lcr);
+ serial_out(up, UART_MCR, mcr | UART_MCR_TCRTLR);
+ serial_out(up, UART_LCR, 0xBF);
+
+ tcr = serial_in(up, UART_TI752_TCR);
+ tlr = serial_in(up, UART_TI752_TLR);
+
+ serial_out(up, UART_LCR, lcr);
+ serial_out(up, UART_MCR, mcr);
+ serial_out(up, UART_LCR, 0xBF);
+
+ xoff1 = serial_in(up, UART_XOFF1);
+ xoff2 = serial_in(up, UART_XOFF2);
+ uasr = serial_in(up, UART_OMAP_UASR);
+
+ serial_out(up, UART_EFR, efr);
+ serial_out(up, UART_LCR, lcr);
+
+
+ DPRINTK("DLL_REG = 0x%x\n", dll);
+ DPRINTK("DLH_REG = 0x%x\n", dlh);
+ DPRINTK("EFR_REG = 0x%x\n", efr);
+
+ DPRINTK("XON1_ADDR_REG = 0x%x\n", xon1);
+ DPRINTK("XON2_ADDR_REG = 0x%x\n", xon2);
+ DPRINTK("TCR_REG = 0x%x\n", tcr);
+ DPRINTK("TLR_REG = 0x%x\n", tlr);
+
+
+ DPRINTK("XOFF1_REG = 0x%x\n", xoff1);
+ DPRINTK("XOFF2_REG = 0x%x\n", xoff2);
+ DPRINTK("UASR_REG = 0x%x\n", uasr);
+}
+#endif
+
+subsys_initcall(serial_omap_init);
+module_exit(serial_omap_exit);
+
+MODULE_DESCRIPTION("OMAP High Speed UART driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");