diff mbox

[v2] ARM: DT: apq8064: add CM-QS600 board

Message ID 1411746990-12518-1-git-send-email-mike.rapoport@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mike Rapoport Sept. 26, 2014, 3:56 p.m. UTC 
Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
---
v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested


 arch/arm/boot/dts/Makefile                  |  1 +
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts

Comments

Kumar Gala Sept. 26, 2014, 4:01 p.m. UTC | #1 
On Sep 26, 2014, at 10:56 AM, Mike Rapoport <mike.rapoport@gmail.com> wrote:

Can you add some material here about the board.

> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
> ---
> v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested
> 

thanks

> arch/arm/boot/dts/Makefile                  |  1 +
> arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
> create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index aaa1a68..71d2ade 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -340,6 +340,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
> dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
> dtb-$(CONFIG_ARCH_QCOM) += \
> 	qcom-apq8064-ifc6410.dtb \
> +	qcom-apq8064-cm-qs600.dtb \

sort alphabetically.

> 	qcom-apq8074-dragonboard.dtb \
> 	qcom-apq8084-ifc6540.dtb \
> 	qcom-apq8084-mtp.dtb \


- k
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index aaa1a68..71d2ade 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -340,6 +340,7 @@  dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 0000000..db7cf03
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@ 
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+	model = "CompuLab CM-QS600";
+	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+	soc {
+		pinctrl@800000 {
+			i2c1_pins: i2c1 {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
+		};
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+			};
+			/* WLAN */
+			sdcc4: sdcc@121c0000 {
+				status = "okay";
+			};
+		};
+	};
+};