| Message ID | 1af922a485e8084aff33eaeafa30d4698d1cc886.1410898073.git.jsarha@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
This patch is invalid now that Mike Turquette took the generic clk-gpio-gate in. The other patches in the series are still Ok. I'll mail a new dts patch shortly. Best regards, Jyri On 09/16/2014 11:40 PM, Jyri Sarha wrote: > Adds mcasp0_pins, clk_mcasp0_fixed, clk_mcasp0, mcasp0, hdmi_audio, > and sound nodes. > > Signed-off-by: Jyri Sarha <jsarha@ti.com> > --- > arch/arm/boot/dts/am335x-boneblack.dts | 52 ++++++++++++++++++++++++++++++++ > 1 file changed, 52 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts > index 305975d..1487f7c 100644 > --- a/arch/arm/boot/dts/am335x-boneblack.dts > +++ b/arch/arm/boot/dts/am335x-boneblack.dts > @@ -59,12 +59,35 @@ > 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ > >; > }; > + > + mcasp0_pins: mcasp0_pins { > + pinctrl-single,pins = < > + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ > + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ > + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ > + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ > + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ > + >; > + }; > }; > > &lcdc { > status = "okay"; > }; > > +&mcasp0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mcasp0_pins>; > + status = "okay"; > + op-mode = <0>; /* MCASP_IIS_MODE */ > + tdm-slots = <2>; > + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ > + 0 0 1 0 > + >; > + tx-num-evt = <1>; > + rx-num-evt = <1>; > +}; > + > / { > hdmi { > compatible = "ti,tilcdc,slave"; > @@ -74,4 +97,33 @@ > pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; > status = "okay"; > }; > + > + clk_mcasp0_fixed: clk_mcasp0_fixed { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <24576000>; > + }; > + > + clk_mcasp0: clk_mcasp0 { > + #clock-cells = <0>; > + compatible = "ti,gpio-gate-clock"; > + clocks = <&clk_mcasp0_fixed>; > + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ > + }; > + > + hdmi_audio: hdmi_audio@0 { > + compatible = "linux,hdmi-audio"; > + status = "okay"; > + }; > + > + sound { > + compatible = "ti,beaglebone-black-audio"; > + ti,model = "TI BeagleBone Black"; > + ti,audio-codec = <&hdmi_audio>; > + ti,mcasp-controller = <&mcasp0>; > + ti,audio-routing = > + "HDMI Out", "TX"; > + clocks = <&clk_mcasp0>; > + clock-names = "mclk"; > + }; > }; > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 305975d..1487f7c 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -59,12 +59,35 @@ 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ >; }; + + mcasp0_pins: mcasp0_pins { + pinctrl-single,pins = < + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */ + 0x19c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */ + 0x194 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x06c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */ + >; + }; }; &lcdc { status = "okay"; }; +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + status = "okay"; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + / { hdmi { compatible = "ti,tilcdc,slave"; @@ -74,4 +97,33 @@ pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; status = "okay"; }; + + clk_mcasp0_fixed: clk_mcasp0_fixed { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24576000>; + }; + + clk_mcasp0: clk_mcasp0 { + #clock-cells = <0>; + compatible = "ti,gpio-gate-clock"; + clocks = <&clk_mcasp0_fixed>; + enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */ + }; + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; + + sound { + compatible = "ti,beaglebone-black-audio"; + ti,model = "TI BeagleBone Black"; + ti,audio-codec = <&hdmi_audio>; + ti,mcasp-controller = <&mcasp0>; + ti,audio-routing = + "HDMI Out", "TX"; + clocks = <&clk_mcasp0>; + clock-names = "mclk"; + }; };
Adds mcasp0_pins, clk_mcasp0_fixed, clk_mcasp0, mcasp0, hdmi_audio, and sound nodes. Signed-off-by: Jyri Sarha <jsarha@ti.com> --- arch/arm/boot/dts/am335x-boneblack.dts | 52 ++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)