diff mbox

[v3,2/3] i2c: hix5hd2: add i2c controller driver

Message ID 1412079628-6316-3-git-send-email-zhangfei.gao@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Zhangfei Gao Sept. 30, 2014, 12:20 p.m. UTC
From: Wei Yan <sledge.yanwei@huawei.com>

I2C drivers for hix5hd2 soc series, including following chipset
Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100.

Signed-off-by: Wei Yan <sledge.yanwei@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
 drivers/i2c/busses/Kconfig       |   10 +
 drivers/i2c/busses/Makefile      |    1 +
 drivers/i2c/busses/i2c-hix5hd2.c |  554 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 565 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-hix5hd2.c

Comments

Wolfram Sang Oct. 3, 2014, 12:09 p.m. UTC | #1
Hi,

On Tue, Sep 30, 2014 at 08:20:27PM +0800, Zhangfei Gao wrote:
> From: Wei Yan <sledge.yanwei@huawei.com>
> 
> I2C drivers for hix5hd2 soc series, including following chipset
> Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100.
> 
> Signed-off-by: Wei Yan <sledge.yanwei@huawei.com>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>

Looks good to me. You probably want to have a look at this patch
http://patchwork.ozlabs.org/patch/394648/

an do something similar here, I guess.

BTW what tests have you performed?

Thanks,

   Wolfram
Zhangfei Gao Oct. 3, 2014, 1:15 p.m. UTC | #2
On 10/03/2014 08:09 PM, Wolfram Sang wrote:
> Hi,
>
> On Tue, Sep 30, 2014 at 08:20:27PM +0800, Zhangfei Gao wrote:
>> From: Wei Yan <sledge.yanwei@huawei.com>
>>
>> I2C drivers for hix5hd2 soc series, including following chipset
>> Hi3716CV200, Hi3719CV100, Hi3718CV100, Hi3719MV100, Hi3718MV100.
>>
>> Signed-off-by: Wei Yan <sledge.yanwei@huawei.com>
>> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
>
> Looks good to me. You probably want to have a look at this patch
> http://patchwork.ozlabs.org/patch/394648/
>
> an do something similar here, I guess.
>
> BTW what tests have you performed?
>

Thanks Wolfram for the info, will update accordingly.

Currently Wei help do the test via I2C device interface, on a specific 
board with i2c device.
We do the test after the board is up, also no i2c activity during probe.

Thanks
Wolfram Sang Oct. 3, 2014, 4:48 p.m. UTC | #3
> Currently Wei help do the test via I2C device interface, on a specific board
> with i2c device.
> We do the test after the board is up, also no i2c activity during probe.

Huh, so the driver has not been tested with a real i2c slave so far? Or
am I misunderstanding something?
Zhangfei Gao Oct. 4, 2014, 12:22 a.m. UTC | #4
On 10/04/2014 12:48 AM, Wolfram Sang wrote:
>> Currently Wei help do the test via I2C device interface, on a specific board
>> with i2c device.
>> We do the test after the board is up, also no i2c activity during probe.
>
> Huh, so the driver has not been tested with a real i2c slave so far? Or
> am I misunderstanding something?

Sorry for the confusion

It is tested via e2prom,
Write group of data then read back to check whether they are same or not.
We use I2C device interface, and only run the test application when 
board is up.

Thanks
diff mbox

Patch

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ac87fa..2ef671f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -77,6 +77,16 @@  config I2C_AMD8111
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-amd8111.
 
+config I2C_HIX5HD2
+	tristate "Hix5hd2 high-speed I2C driver"
+	depends on ARCH_HIX5HD2 || COMPILE_TEST
+	help
+	  Say Y here to include support for high-speed I2C controller in the
+	  Hisilicon based hix5hd2 SoCs.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-hix5hd2.
+
 config I2C_I801
 	tristate "Intel 82801 (ICH/PCH)"
 	depends on PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 49bf07e..9739938 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -47,6 +47,7 @@  obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
 obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
+obj-$(CONFIG_I2C_HIX5HD2)	+= i2c-hix5hd2.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c
new file mode 100644
index 0000000..4b18bde
--- /dev/null
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -0,0 +1,554 @@ 
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Now only support 7 bit address.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+/* Register Map */
+#define HIX5I2C_CTRL		0x00
+#define HIX5I2C_COM		0x04
+#define HIX5I2C_ICR		0x08
+#define HIX5I2C_SR		0x0c
+#define HIX5I2C_SCL_H		0x10
+#define HIX5I2C_SCL_L		0x14
+#define HIX5I2C_TXR		0x18
+#define HIX5I2C_RXR		0x1c
+
+/* I2C_CTRL_REG */
+#define I2C_ENABLE		BIT(8)
+#define I2C_UNMASK_TOTAL	BIT(7)
+#define I2C_UNMASK_START	BIT(6)
+#define I2C_UNMASK_END		BIT(5)
+#define I2C_UNMASK_SEND		BIT(4)
+#define I2C_UNMASK_RECEIVE	BIT(3)
+#define I2C_UNMASK_ACK		BIT(2)
+#define I2C_UNMASK_ARBITRATE	BIT(1)
+#define I2C_UNMASK_OVER		BIT(0)
+#define I2C_UNMASK_ALL		(I2C_UNMASK_ACK | I2C_UNMASK_OVER)
+
+/* I2C_COM_REG */
+#define I2C_NO_ACK		BIT(4)
+#define I2C_START		BIT(3)
+#define I2C_READ		BIT(2)
+#define I2C_WRITE		BIT(1)
+#define I2C_STOP		BIT(0)
+
+/* I2C_ICR_REG */
+#define I2C_CLEAR_START		BIT(6)
+#define I2C_CLEAR_END		BIT(5)
+#define I2C_CLEAR_SEND		BIT(4)
+#define I2C_CLEAR_RECEIVE	BIT(3)
+#define I2C_CLEAR_ACK		BIT(2)
+#define I2C_CLEAR_ARBITRATE	BIT(1)
+#define I2C_CLEAR_OVER		BIT(0)
+#define I2C_CLEAR_ALL		(I2C_CLEAR_START | I2C_CLEAR_END | \
+				I2C_CLEAR_SEND | I2C_CLEAR_RECEIVE | \
+				I2C_CLEAR_ACK | I2C_CLEAR_ARBITRATE | \
+				I2C_CLEAR_OVER)
+
+/* I2C_SR_REG */
+#define I2C_BUSY		BIT(7)
+#define I2C_START_INTR		BIT(6)
+#define I2C_END_INTR		BIT(5)
+#define I2C_SEND_INTR		BIT(4)
+#define I2C_RECEIVE_INTR	BIT(3)
+#define I2C_ACK_INTR		BIT(2)
+#define I2C_ARBITRATE_INTR	BIT(1)
+#define I2C_OVER_INTR		BIT(0)
+
+#define HIX5I2C_MAX_FREQ	400000		/* 400k */
+#define HIX5I2C_READ_OPERATION	0x01
+
+enum hix5hd2_i2c_state {
+	HIX5I2C_STAT_RW_ERR = -1,
+	HIX5I2C_STAT_INIT,
+	HIX5I2C_STAT_RW,
+	HIX5I2C_STAT_SND_STOP,
+	HIX5I2C_STAT_RW_SUCCESS,
+};
+
+struct hix5hd2_i2c_priv {
+	struct i2c_adapter adap;
+	struct i2c_msg *msg;
+	struct completion msg_complete;
+	unsigned int msg_idx;
+	unsigned int msg_len;
+	int stop;
+	void __iomem *regs;
+	struct clk *clk;
+	struct device *dev;
+	spinlock_t lock;	/* IRQ synchronization */
+	int err;
+	unsigned int freq;
+	enum hix5hd2_i2c_state state;
+};
+
+static u32 hix5hd2_i2c_clr_pend_irq(struct hix5hd2_i2c_priv *priv)
+{
+	u32 val = readl_relaxed(priv->regs + HIX5I2C_SR);
+
+	writel_relaxed(val, priv->regs + HIX5I2C_ICR);
+
+	return val;
+}
+
+static void hix5hd2_i2c_clr_all_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(I2C_CLEAR_ALL, priv->regs + HIX5I2C_ICR);
+}
+
+static void hix5hd2_i2c_disable_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(0, priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_enable_irq(struct hix5hd2_i2c_priv *priv)
+{
+	writel_relaxed(I2C_ENABLE | I2C_UNMASK_TOTAL | I2C_UNMASK_ALL,
+		       priv->regs + HIX5I2C_CTRL);
+}
+
+static void hix5hd2_i2c_drv_setrate(struct hix5hd2_i2c_priv *priv)
+{
+	u32 rate, val;
+	u32 scl, sysclock;
+
+	/* close all i2c interrupt */
+	val = readl_relaxed(priv->regs + HIX5I2C_CTRL);
+	writel_relaxed(val & (~I2C_UNMASK_TOTAL), priv->regs + HIX5I2C_CTRL);
+
+	rate = priv->freq;
+	sysclock = clk_get_rate(priv->clk);
+	scl = (sysclock / (rate * 2)) / 2 - 1;
+	writel_relaxed(scl, priv->regs + HIX5I2C_SCL_H);
+	writel_relaxed(scl, priv->regs + HIX5I2C_SCL_L);
+
+	/* restore original interrupt*/
+	writel_relaxed(val, priv->regs + HIX5I2C_CTRL);
+
+	dev_dbg(priv->dev, "%s: sysclock=%d, rate=%d, scl=%d\n",
+		__func__, sysclock, rate, scl);
+}
+
+static void hix5hd2_i2c_init(struct hix5hd2_i2c_priv *priv)
+{
+	hix5hd2_i2c_disable_irq(priv);
+	hix5hd2_i2c_drv_setrate(priv);
+	hix5hd2_i2c_clr_all_irq(priv);
+	hix5hd2_i2c_enable_irq(priv);
+}
+
+static void hix5hd2_i2c_reset(struct hix5hd2_i2c_priv *priv)
+{
+	clk_disable_unprepare(priv->clk);
+	msleep(20);
+	clk_prepare_enable(priv->clk);
+	hix5hd2_i2c_init(priv);
+}
+
+static int hix5hd2_i2c_wait_bus_idle(struct hix5hd2_i2c_priv *priv)
+{
+	unsigned long stop_time;
+	u32 int_status;
+
+	/* wait for 100 milli seconds for the bus to be idle */
+	stop_time = jiffies + msecs_to_jiffies(100);
+	do {
+		int_status = hix5hd2_i2c_clr_pend_irq(priv);
+		if (!(int_status & I2C_BUSY))
+			return 0;
+
+		usleep_range(50, 200);
+	} while (time_before(jiffies, stop_time));
+
+	return -EBUSY;
+}
+
+static void hix5hd2_rw_over(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->state == HIX5I2C_STAT_SND_STOP)
+		dev_dbg(priv->dev, "%s: rw and send stop over\n", __func__);
+	else
+		dev_dbg(priv->dev, "%s: have not data to send\n", __func__);
+
+	priv->state = HIX5I2C_STAT_RW_SUCCESS;
+	priv->err = 0;
+}
+
+static void hix5hd2_rw_handle_stop(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->stop) {
+		priv->state = HIX5I2C_STAT_SND_STOP;
+		writel_relaxed(I2C_STOP, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_over(priv);
+	}
+}
+
+static void hix5hd2_read_handle(struct hix5hd2_i2c_priv *priv)
+{
+	if (priv->msg_len == 1) {
+		/* the last byte don't need send ACK */
+		writel_relaxed(I2C_READ | I2C_NO_ACK, priv->regs + HIX5I2C_COM);
+	} else if (priv->msg_len > 1) {
+		/* if i2c master receive data will send ACK */
+		writel_relaxed(I2C_READ, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(priv);
+	}
+}
+
+static void hix5hd2_write_handle(struct hix5hd2_i2c_priv *priv)
+{
+	u8 data;
+
+	if (priv->msg_len > 0) {
+		data = priv->msg->buf[priv->msg_idx++];
+		writel_relaxed(data, priv->regs + HIX5I2C_TXR);
+		writel_relaxed(I2C_WRITE, priv->regs + HIX5I2C_COM);
+	} else {
+		hix5hd2_rw_handle_stop(priv);
+	}
+}
+
+static int hix5hd2_rw_preprocess(struct hix5hd2_i2c_priv *priv)
+{
+	u8 data;
+
+	if (priv->state == HIX5I2C_STAT_INIT) {
+		priv->state = HIX5I2C_STAT_RW;
+	} else if (priv->state == HIX5I2C_STAT_RW) {
+		if (priv->msg->flags & I2C_M_RD) {
+			data = readl_relaxed(priv->regs + HIX5I2C_RXR);
+			priv->msg->buf[priv->msg_idx++] = data;
+		}
+		priv->msg_len--;
+	} else {
+		dev_dbg(priv->dev, "%s: error: priv->state = %d, msg_len = %d\n",
+			__func__, priv->state, priv->msg_len);
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static irqreturn_t hix5hd2_i2c_irq(int irqno, void *dev_id)
+{
+	struct hix5hd2_i2c_priv *priv = dev_id;
+	u32 int_status;
+	int ret;
+
+	spin_lock(&priv->lock);
+
+	int_status = hix5hd2_i2c_clr_pend_irq(priv);
+
+	/* handle error */
+	if (int_status & I2C_ARBITRATE_INTR) {
+		/* bus error */
+		dev_dbg(priv->dev, "ARB bus loss\n");
+		priv->err = -EAGAIN;
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	} else if (int_status & I2C_ACK_INTR) {
+		/* ack error */
+		dev_dbg(priv->dev, "No ACK from device\n");
+		priv->err = -ENXIO;
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		goto stop;
+	}
+
+	if (int_status & I2C_OVER_INTR) {
+		if (priv->msg_len > 0) {
+			ret = hix5hd2_rw_preprocess(priv);
+			if (ret) {
+				priv->err = ret;
+				priv->state = HIX5I2C_STAT_RW_ERR;
+				goto stop;
+			}
+			if (priv->msg->flags & I2C_M_RD)
+				hix5hd2_read_handle(priv);
+			else
+				hix5hd2_write_handle(priv);
+		} else {
+			hix5hd2_rw_over(priv);
+		}
+	}
+
+stop:
+	if ((priv->state == HIX5I2C_STAT_RW_SUCCESS &&
+	     priv->msg->len == priv->msg_idx) ||
+	    (priv->state == HIX5I2C_STAT_RW_ERR)) {
+		hix5hd2_i2c_disable_irq(priv);
+		hix5hd2_i2c_clr_pend_irq(priv);
+		complete(&priv->msg_complete);
+	}
+
+	spin_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	hix5hd2_i2c_clr_all_irq(priv);
+	hix5hd2_i2c_enable_irq(priv);
+
+	if (priv->msg->flags & I2C_M_RD)
+		writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION,
+			       priv->regs + HIX5I2C_TXR);
+	else
+		writel_relaxed(priv->msg->addr << 1,
+			       priv->regs + HIX5I2C_TXR);
+
+	writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int hix5hd2_i2c_xfer_msg(struct hix5hd2_i2c_priv *priv,
+				struct i2c_msg *msgs, int stop)
+{
+	unsigned long timeout;
+	int ret;
+
+	priv->msg = msgs;
+	priv->msg_idx = 0;
+	priv->msg_len = priv->msg->len;
+	priv->stop = stop;
+	priv->err = 0;
+	priv->state = HIX5I2C_STAT_INIT;
+
+	reinit_completion(&priv->msg_complete);
+	hix5hd2_i2c_message_start(priv, stop);
+
+	timeout = wait_for_completion_timeout(&priv->msg_complete,
+					      priv->adap.timeout);
+	if (timeout == 0) {
+		priv->state = HIX5I2C_STAT_RW_ERR;
+		priv->err = -ETIMEDOUT;
+		dev_warn(priv->dev, "%s timeout=%d\n",
+			 msgs->flags & I2C_M_RD ? "rx" : "tx",
+			 priv->adap.timeout);
+	}
+	ret = priv->state;
+
+	/*
+	 * If this is the last message to be transfered (stop == 1)
+	 * Then check if the bus can be brought back to idle.
+	 */
+	if (priv->state == HIX5I2C_STAT_RW_SUCCESS && stop)
+		ret = hix5hd2_i2c_wait_bus_idle(priv);
+
+	if (ret < 0)
+		hix5hd2_i2c_reset(priv);
+
+	return priv->err;
+}
+
+static int hix5hd2_i2c_xfer(struct i2c_adapter *adap,
+			    struct i2c_msg *msgs, int num)
+{
+	struct hix5hd2_i2c_priv *priv = i2c_get_adapdata(adap);
+	int i, ret, stop;
+
+	pm_runtime_get_sync(priv->dev);
+
+	for (i = 0; i < num; i++, msgs++) {
+		stop = (i == num - 1);
+		ret = hix5hd2_i2c_xfer_msg(priv, msgs, stop);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (i == num) {
+		ret = num;
+	} else {
+		/* Only one message, cannot access the device */
+		if (i == 1)
+			ret = -EREMOTEIO;
+		else
+			ret = i;
+
+		dev_warn(priv->dev, "xfer message failed\n");
+	}
+
+out:
+	pm_runtime_mark_last_busy(priv->dev);
+	pm_runtime_put_autosuspend(priv->dev);
+	return ret;
+}
+
+static u32 hix5hd2_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm hix5hd2_i2c_algorithm = {
+	.master_xfer		= hix5hd2_i2c_xfer,
+	.functionality		= hix5hd2_i2c_func,
+};
+
+static int hix5hd2_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct hix5hd2_i2c_priv *priv;
+	struct resource *mem;
+	unsigned int freq;
+	int irq, ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	if (of_property_read_u32(np, "clock-frequency", &freq)) {
+		/* use 100k as default value */
+		priv->freq = 100000;
+	} else {
+		if (freq > HIX5I2C_MAX_FREQ) {
+			priv->freq = HIX5I2C_MAX_FREQ;
+			dev_warn(priv->dev, "use max freq %d instead\n",
+				 HIX5I2C_MAX_FREQ);
+		} else {
+			priv->freq = freq;
+		}
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+		return irq;
+	}
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return PTR_ERR(priv->clk);
+	}
+	clk_prepare_enable(priv->clk);
+
+	strlcpy(priv->adap.name, "hix5hd2-i2c", sizeof(priv->adap.name));
+	priv->dev = &pdev->dev;
+	priv->adap.owner = THIS_MODULE;
+	priv->adap.algo = &hix5hd2_i2c_algorithm;
+	priv->adap.retries = 3;
+	priv->adap.dev.of_node = np;
+	priv->adap.algo_data = priv;
+	priv->adap.dev.parent = &pdev->dev;
+	i2c_set_adapdata(&priv->adap, priv);
+	platform_set_drvdata(pdev, priv);
+	spin_lock_init(&priv->lock);
+	init_completion(&priv->msg_complete);
+
+	hix5hd2_i2c_init(priv);
+
+	ret = devm_request_irq(&pdev->dev, irq, hix5hd2_i2c_irq,
+			       IRQF_NO_SUSPEND | IRQF_ONESHOT,
+			       dev_name(&pdev->dev), priv);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq);
+		goto err_clk;
+	}
+
+	ret = i2c_add_adapter(&priv->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		goto err_clk;
+	}
+
+	pm_suspend_ignore_children(&pdev->dev, true);
+	pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC);
+	pm_runtime_use_autosuspend(priv->dev);
+	pm_runtime_set_active(priv->dev);
+	pm_runtime_enable(priv->dev);
+
+	return ret;
+
+err_clk:
+	clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int hix5hd2_i2c_remove(struct platform_device *pdev)
+{
+	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&priv->adap);
+	pm_runtime_disable(priv->dev);
+	pm_runtime_set_suspended(priv->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int hix5hd2_i2c_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static int hix5hd2_i2c_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct hix5hd2_i2c_priv *priv = platform_get_drvdata(pdev);
+
+	clk_prepare_enable(priv->clk);
+	hix5hd2_i2c_init(priv);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops hix5hd2_i2c_pm_ops = {
+	SET_PM_RUNTIME_PM_OPS(hix5hd2_i2c_runtime_suspend,
+			      hix5hd2_i2c_runtime_resume,
+			      NULL)
+};
+
+static const struct of_device_id hix5hd2_i2c_match[] = {
+	{ .compatible = "hisilicon,hix5hd2-i2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hix5hd2_i2c_match);
+
+static struct platform_driver hix5hd2_i2c_driver = {
+	.probe		= hix5hd2_i2c_probe,
+	.remove		= hix5hd2_i2c_remove,
+	.driver		= {
+		.name	= "hix5hd2-i2c",
+		.pm	= &hix5hd2_i2c_pm_ops,
+		.of_match_table = hix5hd2_i2c_match,
+	},
+};
+
+module_platform_driver(hix5hd2_i2c_driver);
+
+MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
+MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-hix5hd2");