| Message ID | 1412179751-5859-1-git-send-email-mike.rapoport@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Kumar, As I've understand from Kevin's letter, we can submit the DT only platforms addition also for 3.18. Can we please have this one applied? Thanks! On 10/01/14 19:09, Mike Rapoport wrote: > CM-QS600 is a APQ8064 based computer on module. > The details are available at > http://compulab.co.il/products/computer-on-modules/cm-qs600/ > > Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> > Acked-by: Igor Grinberg <grinberg@compulab.co.il> > --- > v2 changes: duplicate the settings for the cm-qs600 board in its .dts file as Kumar suggested > v3 changes: add board details and keep dts Makefile sorted alphabetically > v4 changes: fix eeprom defintion and update subject as per Igor's comments > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 +++++++++++++++++++++++++++++ > 2 files changed, 60 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index aaa1a68..3243722 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ > orion5x-rd88f5182-nas.dtb > dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb > dtb-$(CONFIG_ARCH_QCOM) += \ > + qcom-apq8064-cm-qs600.dtb \ > qcom-apq8064-ifc6410.dtb \ > qcom-apq8074-dragonboard.dtb \ > qcom-apq8084-ifc6540.dtb \ > diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > new file mode 100644 > index 0000000..5d75666 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts > @@ -0,0 +1,59 @@ > +#include "qcom-apq8064-v2.0.dtsi" > + > +/ { > + model = "CompuLab CM-QS600"; > + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; > + > + soc { > + pinctrl@800000 { > + i2c1_pins: i2c1 { > + mux { > + pins = "gpio20", "gpio21"; > + function = "gsbi1"; > + }; > + }; > + }; > + > + gsbi@12440000 { > + status = "okay"; > + qcom,mode = <GSBI_PROT_I2C>; > + > + i2c@12460000 { > + status = "okay"; > + clock-frequency = <200000>; > + pinctrl-0 = <&i2c1_pins>; > + pinctrl-names = "default"; > + > + eeprom: eeprom@50 { > + compatible = "24c02"; > + reg = <0x50>; > + pagesize = <32>; > + }; > + }; > + }; > + > + gsbi@16600000 { > + status = "ok"; > + qcom,mode = <GSBI_PROT_I2C_UART>; > + serial@16640000 { > + status = "ok"; > + }; > + }; > + > + amba { > + /* eMMC */ > + sdcc1: sdcc@12400000 { > + status = "okay"; > + }; > + > + /* External micro SD card */ > + sdcc3: sdcc@12180000 { > + status = "okay"; > + }; > + /* WLAN */ > + sdcc4: sdcc@121c0000 { > + status = "okay"; > + }; > + }; > + }; > +}; >
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index aaa1a68..3243722 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -339,6 +339,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts new file mode 100644 index 0000000..5d75666 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -0,0 +1,59 @@ +#include "qcom-apq8064-v2.0.dtsi" + +/ { + model = "CompuLab CM-QS600"; + compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + + soc { + pinctrl@800000 { + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + + i2c@12460000 { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom: eeprom@50 { + compatible = "24c02"; + reg = <0x50>; + pagesize = <32>; + }; + }; + }; + + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + + amba { + /* eMMC */ + sdcc1: sdcc@12400000 { + status = "okay"; + }; + + /* External micro SD card */ + sdcc3: sdcc@12180000 { + status = "okay"; + }; + /* WLAN */ + sdcc4: sdcc@121c0000 { + status = "okay"; + }; + }; + }; +};