| Message ID | 1413922998-4371-1-git-send-email-smoch@web.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Soeren, Very neat patch! A couple of minor comments below ... On Tue, Oct 21, 2014 at 10:23:18PM +0200, Soeren Moch wrote: > TBS2910 is a i.MX6Q based board. For additional details refer to > http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html > > Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Signed-off-by: Soeren Moch <smoch@web.de> > --- > Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Cc: Shawn Guo <shawn.guo@linaro.org> > Cc: Sascha Hauer <kernel@pengutronix.de> > > Changes for v2: > - add tbs vendor prefix to vendor-prefixes.txt > - use GPIO_ACTIVE_{HIGH,LOW} > - add led label and default-state="keep" > - whitespace cleanup > --- > .../devicetree/bindings/vendor-prefixes.txt | 1 + This is not an i.MX change. It should go through DT tree or we need an ACK from DT maintainers. > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6q-tbs2910.dts | 415 +++++++++++++++++++++ > 3 files changed, 417 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-tbs2910.dts > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index ac7269f..2204b49 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -133,6 +133,7 @@ st STMicroelectronics > ste ST-Ericsson > stericsson ST-Ericsson > synology Synology, Inc. > +tbs Turbosight (TBS) Technologies > ti Texas Instruments > tlm Trusted Logic Mobility > toradex Toradex AG > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index b8c5cd3..f6ad478 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -230,6 +230,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ > imx6q-sabrelite.dtb \ > imx6q-sabresd.dtb \ > imx6q-sbc6x.dtb \ > + imx6q-tbs2910.dtb \ > imx6q-udoo.dtb \ > imx6q-wandboard.dtb \ > imx6q-wandboard-revb1.dtb \ > diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts > new file mode 100644 > index 0000000..60a91ee > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts > @@ -0,0 +1,415 @@ > +/* > + * Copyright 2014 Soeren Moch <smoch@web.de> > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ It's been discussed that GPL is not a proper licence for device tree source, which might be used on other system like FreeBSD. So for new DTS files, it's recommended to use copyright in the following example. http://www.spinics.net/lists/devicetree/msg54551.html > + > +/dts-v1/; > + > +#include "imx6q.dtsi" > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > + > +/ { > + model = "TBS2910 Matrix ARM mini PC"; > + compatible = "tbs,imx6q-tbs2910", "fsl,imx6q"; > + > + chosen { > + stdout-path = &uart1; > + }; > + > + memory { > + reg = <0x10000000 0x80000000>; > + }; > + > + fan { > + compatible = "gpio-fan"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_fan>; > + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; > + gpio-fan,speed-map = <0 0 > + 3000 1>; > + }; > + > + ir_recv { > + compatible = "gpio-ir-receiver"; > + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ir>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + blue { > + label = "blue_status_led"; > + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; > + default-state = "keep"; > + }; > + }; > + > + regulators { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + reg_2p5v: regulator@0 { > + compatible = "regulator-fixed"; > + reg = <0>; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator@1 { > + compatible = "regulator-fixed"; > + reg = <1>; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_5p0v: regulator@2 { > + compatible = "regulator-fixed"; > + reg = <2>; > + regulator-name = "5P0V"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + }; > + > + sound-sgtl5000 { > + audio-codec = <&sgtl5000>; > + audio-routing = > + "MIC_IN", "Mic Jack", > + "Mic Jack", "Mic Bias", > + "Headphone Jack", "HP_OUT"; > + compatible = "fsl,imx-audio-sgtl5000"; > + model = "On-board Codec"; > + mux-ext-port = <3>; > + mux-int-port = <1>; > + ssi-controller = <&ssi1>; > + }; > + > + sound-spdif { > + compatible = "fsl,imx-audio-spdif"; > + model = "On-board SPDIF"; > + spdif-controller = <&spdif>; > + spdif-out; > + }; > +}; > + > +&audmux { > + status = "okay"; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rgmii"; > + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&hdmi { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hdmi>; > + ddc-i2c-bus = <&i2c2>; > + status = "okay"; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + sgtl5000: sgtl5000@0a { > + clocks = <&clks 201>; > + compatible = "fsl,sgtl5000"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_sgtl5000>; > + reg = <0x0a>; > + VDDA-supply = <®_2p5v>; > + VDDIO-supply = <®_3p3v>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + rtc: ds1307@68 { > + compatible = "dallas,ds1307"; > + reg = <0x68>; > + }; > +}; > + > +&iomuxc { We do sort nodes alphabetically, but this one is a little special. Moving it to the bottom of the file will slightly improve the readability of the file. > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_hog>; > + > + imx6q-tbs2910 { > + pinctrl_hog: hoggrp { > + fsl,pins = < > + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 > + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 > + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 > + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 > + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 > + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 > + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 > + >; > + }; > + > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 > + >; > + }; > + > + pinctrl_hdmi: hdmigrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 > + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_ir: irgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x80000000 > + >; > + }; > + > + pinctrl_pcie: pciegrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 > + >; > + }; > + > + pinctrl_sgtl5000: sgtl5000grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 > + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 > + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 > + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 > + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 > + >; > + }; > + > + pinctrl_spdif: spdifgrp { > + fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 > + >; > + }; > + > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + >; > + }; > + > + pinctrl_usdhc4: usdhc4grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 > + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 > + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 > + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 > + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 > + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 > + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 > + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 > + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 > + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 > + >; > + }; > + }; > + > + gpio_fan { > + pinctrl_gpio_fan: gpiofangrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 > + >; > + }; > + }; > + > + gpio_leds { > + pinctrl_gpio_leds: gpioledsgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 > + >; > + }; > + }; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; > + status = "okay"; > +}; > + > +&sata { > + status = "okay"; > +}; > + > +&snvs_poweroff { > + status = "okay"; > +}; Is snvs_poweroff already available in <soc>.dtsi? Shawn > + > +&spdif { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spdif>; > + status = "okay"; > +}; > + > +&ssi1 { > + fsl,mode = "i2s-slave"; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_5p0v>; > + status = "okay"; > +}; > + > +&usbotg { > + vbus-supply = <®_5p0v>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + disable-over-current; > + status = "okay"; > +}; > + > +&usdhc2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc2>; > + bus-width = <4>; > + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; > + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <®_3p3v>; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + bus-width = <4>; > + cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; > + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; > + vmmc-supply = <®_3p3v>; > + status = "okay"; > +}; > + > +&usdhc4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc4>; > + bus-width = <8>; > + non-removable; > + no-1-8-v; > + status = "okay"; > +}; > -- > 1.9.1 >
Hi Shawn, thanks for your comments. > Hi Soeren, > > Very neat patch! A couple of minor comments below ... > > On Tue, Oct 21, 2014 at 10:23:18PM +0200, Soeren Moch wrote: >> TBS2910 is a i.MX6Q based board. For additional details refer to >> http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html >> >> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> Signed-off-by: Soeren Moch <smoch@web.de> >> --- >> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >> Cc: Shawn Guo <shawn.guo@linaro.org> >> Cc: Sascha Hauer <kernel@pengutronix.de> >> >> Changes for v2: >> - add tbs vendor prefix to vendor-prefixes.txt >> - use GPIO_ACTIVE_{HIGH,LOW} >> - add led label and default-state="keep" >> - whitespace cleanup >> --- >> .../devicetree/bindings/vendor-prefixes.txt | 1 + > > This is not an i.MX change. It should go through DT tree or we need > an ACK from DT maintainers. This was not part of the original patch and came in due to review comments. If it is not required I can remove it. If you suggest some other way to handle this, was exactly should I do? I'm not very experienced in kernel development. > >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/imx6q-tbs2910.dts | 415 +++++++++++++++++++++ >> 3 files changed, 417 insertions(+) >> create mode 100644 arch/arm/boot/dts/imx6q-tbs2910.dts >> >> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt >> index ac7269f..2204b49 100644 >> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >> @@ -133,6 +133,7 @@ st STMicroelectronics >> ste ST-Ericsson >> stericsson ST-Ericsson >> synology Synology, Inc. >> +tbs Turbosight (TBS) Technologies >> ti Texas Instruments >> tlm Trusted Logic Mobility >> toradex Toradex AG >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index b8c5cd3..f6ad478 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -230,6 +230,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ >> imx6q-sabrelite.dtb \ >> imx6q-sabresd.dtb \ >> imx6q-sbc6x.dtb \ >> + imx6q-tbs2910.dtb \ >> imx6q-udoo.dtb \ >> imx6q-wandboard.dtb \ >> imx6q-wandboard-revb1.dtb \ >> diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts >> new file mode 100644 >> index 0000000..60a91ee >> --- /dev/null >> +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts >> @@ -0,0 +1,415 @@ >> +/* >> + * Copyright 2014 Soeren Moch <smoch@web.de> >> + * Copyright 2012 Freescale Semiconductor, Inc. >> + * Copyright 2011 Linaro Ltd. >> + * >> + * The code contained herein is licensed under the GNU General Public >> + * License. You may obtain a copy of the GNU General Public License >> + * Version 2 or later at the following locations: >> + * >> + * http://www.opensource.org/licenses/gpl-license.html >> + * http://www.gnu.org/copyleft/gpl.html >> + */ > > It's been discussed that GPL is not a proper licence for device tree > source, which might be used on other system like FreeBSD. So for new > DTS files, it's recommended to use copyright in the following example. > > http://www.spinics.net/lists/devicetree/msg54551.html Ok, I will modify the copyright. >> + >> +/dts-v1/; >> + >> +#include "imx6q.dtsi" >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/input/input.h> >> + >> +/ { >> + model = "TBS2910 Matrix ARM mini PC"; >> + compatible = "tbs,imx6q-tbs2910", "fsl,imx6q"; >> + >> + chosen { >> + stdout-path = &uart1; >> + }; >> + >> + memory { >> + reg = <0x10000000 0x80000000>; >> + }; >> + >> + fan { >> + compatible = "gpio-fan"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_gpio_fan>; >> + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; >> + gpio-fan,speed-map = <0 0 >> + 3000 1>; >> + }; >> + >> + ir_recv { >> + compatible = "gpio-ir-receiver"; >> + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_ir>; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_gpio_leds>; >> + >> + blue { >> + label = "blue_status_led"; >> + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; >> + default-state = "keep"; >> + }; >> + }; >> + >> + regulators { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + reg_2p5v: regulator@0 { >> + compatible = "regulator-fixed"; >> + reg = <0>; >> + regulator-name = "2P5V"; >> + regulator-min-microvolt = <2500000>; >> + regulator-max-microvolt = <2500000>; >> + regulator-always-on; >> + }; >> + >> + reg_3p3v: regulator@1 { >> + compatible = "regulator-fixed"; >> + reg = <1>; >> + regulator-name = "3P3V"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + reg_5p0v: regulator@2 { >> + compatible = "regulator-fixed"; >> + reg = <2>; >> + regulator-name = "5P0V"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-always-on; >> + }; >> + }; >> + >> + sound-sgtl5000 { >> + audio-codec = <&sgtl5000>; >> + audio-routing = >> + "MIC_IN", "Mic Jack", >> + "Mic Jack", "Mic Bias", >> + "Headphone Jack", "HP_OUT"; >> + compatible = "fsl,imx-audio-sgtl5000"; >> + model = "On-board Codec"; >> + mux-ext-port = <3>; >> + mux-int-port = <1>; >> + ssi-controller = <&ssi1>; >> + }; >> + >> + sound-spdif { >> + compatible = "fsl,imx-audio-spdif"; >> + model = "On-board SPDIF"; >> + spdif-controller = <&spdif>; >> + spdif-out; >> + }; >> +}; >> + >> +&audmux { >> + status = "okay"; >> +}; >> + >> +&fec { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_enet>; >> + phy-mode = "rgmii"; >> + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; >> + status = "okay"; >> +}; >> + >> +&hdmi { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_hdmi>; >> + ddc-i2c-bus = <&i2c2>; >> + status = "okay"; >> +}; >> + >> +&i2c1 { >> + clock-frequency = <100000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_i2c1>; >> + status = "okay"; >> + >> + sgtl5000: sgtl5000@0a { >> + clocks = <&clks 201>; >> + compatible = "fsl,sgtl5000"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_sgtl5000>; >> + reg = <0x0a>; >> + VDDA-supply = <®_2p5v>; >> + VDDIO-supply = <®_3p3v>; >> + }; >> +}; >> + >> +&i2c2 { >> + clock-frequency = <100000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_i2c2>; >> + status = "okay"; >> +}; >> + >> +&i2c3 { >> + clock-frequency = <100000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_i2c3>; >> + status = "okay"; >> + >> + rtc: ds1307@68 { >> + compatible = "dallas,ds1307"; >> + reg = <0x68>; >> + }; >> +}; >> + >> +&iomuxc { > > We do sort nodes alphabetically, but this one is a little special. > Moving it to the bottom of the file will slightly improve the > readability of the file. OK, I will move this node to the bottom. When talking about readability, in my original patch I used spaces to align the pin configuration values to preserve human readability while obeying the line length limits. Is it really desired to drop human readability in favor of avoiding spaces? >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_hog>; >> + >> + imx6q-tbs2910 { >> + pinctrl_hog: hoggrp { >> + fsl,pins = < >> + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 >> + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 >> + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 >> + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 >> + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 >> + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 >> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 >> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 >> + >; >> + }; >> + >> + pinctrl_enet: enetgrp { >> + fsl,pins = < >> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 >> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 >> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 >> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 >> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 >> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 >> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 >> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 >> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 >> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 >> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 >> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 >> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 >> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 >> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 >> + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >> + >; >> + }; >> + >> + pinctrl_hdmi: hdmigrp { >> + fsl,pins = < >> + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 >> + >; >> + }; >> + >> + pinctrl_i2c1: i2c1grp { >> + fsl,pins = < >> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 >> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 >> + >; >> + }; >> + >> + pinctrl_i2c2: i2c2grp { >> + fsl,pins = < >> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 >> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >> + >; >> + }; >> + >> + pinctrl_i2c3: i2c3grp { >> + fsl,pins = < >> + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 >> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >> + >; >> + }; >> + >> + pinctrl_ir: irgrp { >> + fsl,pins = < >> + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x80000000 >> + >; >> + }; >> + >> + pinctrl_pcie: pciegrp { >> + fsl,pins = < >> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 >> + >; >> + }; >> + >> + pinctrl_sgtl5000: sgtl5000grp { >> + fsl,pins = < >> + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 >> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 >> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 >> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 >> + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >> + >; >> + }; >> + >> + pinctrl_spdif: spdifgrp { >> + fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 >> + >; >> + }; >> + >> + pinctrl_uart1: uart1grp { >> + fsl,pins = < >> + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 >> + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >> + >; >> + }; >> + >> + pinctrl_uart2: uart2grp { >> + fsl,pins = < >> + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 >> + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >> + >; >> + }; >> + >> + pinctrl_usbotg: usbotggrp { >> + fsl,pins = < >> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >> + >; >> + }; >> + >> + pinctrl_usdhc2: usdhc2grp { >> + fsl,pins = < >> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 >> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 >> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 >> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 >> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 >> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 >> + >; >> + }; >> + >> + pinctrl_usdhc3: usdhc3grp { >> + fsl,pins = < >> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 >> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 >> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 >> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 >> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 >> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 >> + >; >> + }; >> + >> + pinctrl_usdhc4: usdhc4grp { >> + fsl,pins = < >> + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 >> + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 >> + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 >> + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 >> + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 >> + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 >> + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 >> + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 >> + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 >> + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 >> + >; >> + }; >> + }; >> + >> + gpio_fan { >> + pinctrl_gpio_fan: gpiofangrp { >> + fsl,pins = < >> + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 >> + >; >> + }; >> + }; >> + >> + gpio_leds { >> + pinctrl_gpio_leds: gpioledsgrp { >> + fsl,pins = < >> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 >> + >; >> + }; >> + }; >> +}; >> + >> +&pcie { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_pcie>; >> + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; >> + status = "okay"; >> +}; >> + >> +&sata { >> + status = "okay"; >> +}; >> + >> +&snvs_poweroff { >> + status = "okay"; >> +}; > > Is snvs_poweroff already available in <soc>.dtsi? I read some discussions about it and thought it is or at least will be there before my patch is applied. But I'm very sure that you know this better than me. Do you suggest to remove this node? Soeren > > Shawn > >> + >> +&spdif { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_spdif>; >> + status = "okay"; >> +}; >> + >> +&ssi1 { >> + fsl,mode = "i2s-slave"; >> + status = "okay"; >> +}; >> + >> +&uart1 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_uart1>; >> + status = "okay"; >> +}; >> + >> +&uart2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_uart2>; >> + status = "okay"; >> +}; >> + >> +&usbh1 { >> + vbus-supply = <®_5p0v>; >> + status = "okay"; >> +}; >> + >> +&usbotg { >> + vbus-supply = <®_5p0v>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usbotg>; >> + disable-over-current; >> + status = "okay"; >> +}; >> + >> +&usdhc2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usdhc2>; >> + bus-width = <4>; >> + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; >> + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; >> + vmmc-supply = <®_3p3v>; >> + status = "okay"; >> +}; >> + >> +&usdhc3 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usdhc3>; >> + bus-width = <4>; >> + cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; >> + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; >> + vmmc-supply = <®_3p3v>; >> + status = "okay"; >> +}; >> + >> +&usdhc4 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_usdhc4>; >> + bus-width = <8>; >> + non-removable; >> + no-1-8-v; >> + status = "okay"; >> +}; >> -- >> 1.9.1 >>
On 25.10.2014 19:50, Soeren Moch wrote: > thanks for your comments. >> >> Very neat patch! A couple of minor comments below ... >> >> On Tue, Oct 21, 2014 at 10:23:18PM +0200, Soeren Moch wrote: >>> TBS2910 is a i.MX6Q based board. For additional details refer to >>> http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html >>> >>> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >>> Signed-off-by: Soeren Moch <smoch@web.de> >>> --- >>> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> >>> Cc: Shawn Guo <shawn.guo@linaro.org> >>> Cc: Sascha Hauer <kernel@pengutronix.de> >>> >>> Changes for v2: >>> - add tbs vendor prefix to vendor-prefixes.txt >>> - use GPIO_ACTIVE_{HIGH,LOW} >>> - add led label and default-state="keep" >>> - whitespace cleanup >>> --- >>> .../devicetree/bindings/vendor-prefixes.txt | 1 + >> >> This is not an i.MX change. It should go through DT tree or we need >> an ACK from DT maintainers. > > This was not part of the original patch and came in due to review > comments. If it is not required I can remove it. > > If you suggest some other way to handle this, was exactly should I do? > I'm not very experienced in kernel development. Split the changes for vendor-prefixes.txt into a separate patch. When you resend, run ./scripts/get_maintainer.pl on each of the patches. It will give you people and lists to put into Cc (you can leave out committers, make sure to add Maintainers and the corresponding lists). Once read by a DT maintainer, he will either pick it up or give an Acked-by. [...] >>> diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts >>> new file mode 100644 >>> index 0000000..60a91ee >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts >>> @@ -0,0 +1,415 @@ >>> +/* >>> + * Copyright 2014 Soeren Moch <smoch@web.de> >>> + * Copyright 2012 Freescale Semiconductor, Inc. >>> + * Copyright 2011 Linaro Ltd. >>> + * >>> + * The code contained herein is licensed under the GNU General Public >>> + * License. You may obtain a copy of the GNU General Public License >>> + * Version 2 or later at the following locations: >>> + * >>> + * http://www.opensource.org/licenses/gpl-license.html >>> + * http://www.gnu.org/copyleft/gpl.html >>> + */ [...] >>> + rtc: ds1307@68 { >>> + compatible = "dallas,ds1307"; >>> + reg = <0x68>; >>> + }; >>> +}; >>> + >>> +&iomuxc { >> >> We do sort nodes alphabetically, but this one is a little special. >> Moving it to the bottom of the file will slightly improve the >> readability of the file. > > OK, I will move this node to the bottom. > > When talking about readability, in my original patch I used spaces to > align the pin configuration values to preserve human readability while > obeying the line length limits. Is it really desired to drop human > readability in favor of avoiding spaces? IIRC, there has been no strict 80-column rule for dts{i} files in the past. In general, I'd prefer readability before 80-column rule if it is just about some few chars. But that is a matter of taste, I guess. BTW, the comment I made about indentation on your patch was about <TAB><TAB><SPACES> instead of <TAB><TAB><TAB> in blue led node. I agree that once you reached the property indent with TABs, use spaces to align multi-line properties for readability. Sebastian
Thanks Sebastian for clarifying things. This leaves me only one to reply. On Sat, Oct 25, 2014 at 07:50:30PM +0200, Soeren Moch wrote: > >> +&snvs_poweroff { > >> + status = "okay"; > >> +}; > > > > Is snvs_poweroff already available in <soc>.dtsi? > > I read some discussions about it and thought it is or at least will be > there before my patch is applied. But I'm very sure that you know this > better than me. > Do you suggest to remove this node? We have to remove this node, because if I apply the patch on my tree, I get the following error when compiling the DTS. DTC arch/arm/boot/dts/imx6q-tbs2910.dtb Error: ../arch/arm/boot/dts/imx6q-tbs2910.dts:350.2-3 label or path, 'snvs_poweroff', not found FATAL ERROR: Syntax error parsing input tree make[2]: *** [arch/arm/boot/dts/imx6q-tbs2910.dtb] Error 1 make[1]: *** [dtbs] Error 2 I'm saying snvs_poweroff node is not available on mainline tree yet. You must have generated the patch against some tree without additional patches applied? Shawn
On Tue, Oct 21, 2014 at 10:23:18PM +0200, Soeren Moch wrote: > TBS2910 is a i.MX6Q based board. For additional details refer to > http://www.tbsdtv.com/products/tbs2910-matrix-arm-mini-pc.html > > Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Signed-off-by: Soeren Moch <smoch@web.de> When you resend v3, please change patch prefix to "ARM: dts: ..." Shawn
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ac7269f..2204b49 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -133,6 +133,7 @@ st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson synology Synology, Inc. +tbs Turbosight (TBS) Technologies ti Texas Instruments tlm Trusted Logic Mobility toradex Toradex AG diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b8c5cd3..f6ad478 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -230,6 +230,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-tbs2910.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts new file mode 100644 index 0000000..60a91ee --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -0,0 +1,415 @@ +/* + * Copyright 2014 Soeren Moch <smoch@web.de> + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "TBS2910 Matrix ARM mini PC"; + compatible = "tbs,imx6q-tbs2910", "fsl,imx6q"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x80000000>; + }; + + fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_fan>; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 3000 1>; + }; + + ir_recv { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + blue { + label = "blue_status_led"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <3>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&audmux { + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + clocks = <&clks 201>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc: ds1307@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6q-tbs2910 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ir: irgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x80000000 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_fan { + pinctrl_gpio_fan: gpiofangrp { + fsl,pins = < + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_5p0v>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +};