diff mbox

[v5,4/6] ARM: rockchip: add suspend and resume for RK3288

Message ID 1414417650-19402-5-git-send-email-zyw@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Chris Zhong Oct. 27, 2014, 1:47 p.m. UTC
It's a basic version of suspend and resume for rockchip, it only support RK3288
now.

Signed-off-by: Tony Xie <xxx@rock-chips.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>

Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
---

Changes in v5:
- use rk3288_bootram_sz for memcpy size
- fixed error of sram save and restore

Changes in v4:
- remove grf regmap

Changes in v3:
- move the pinmux of gpio6_c6 save and restore to pinctrl-rockchip

Changes in v2:
- add the regulator calls in prepare and finish.
- add the pinmux of gpio6_c6 save and restore

 arch/arm/mach-rockchip/Makefile   |    1 +
 arch/arm/mach-rockchip/pm.c       |  305 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-rockchip/pm.h       |  103 +++++++++++++
 arch/arm/mach-rockchip/rockchip.c |    7 +
 arch/arm/mach-rockchip/sleep.S    |   90 +++++++++++
 5 files changed, 506 insertions(+)
 create mode 100644 arch/arm/mach-rockchip/pm.c
 create mode 100644 arch/arm/mach-rockchip/pm.h
 create mode 100644 arch/arm/mach-rockchip/sleep.S

Comments

Doug Anderson Oct. 27, 2014, 5:44 p.m. UTC | #1
Chris,

On Mon, Oct 27, 2014 at 6:47 AM, Chris Zhong <zyw@rock-chips.com> wrote:
> It's a basic version of suspend and resume for rockchip, it only support RK3288
> now.
>
> Signed-off-by: Tony Xie <xxx@rock-chips.com>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> Reviewed-by: Doug Anderson <dianders@chromium.org>
> Tested-by: Doug Anderson <dianders@chromium.org>

Please no blank lines in tags.

> +static inline void rk3288_copy_data_to_sram(void)
> +{
> +       /* save boot sram data in ddr mem */
> +       memcpy(bootram_save_data, rk3288_bootram_base, rk3288_bootram_sz);

I'm going to suggest again to get rid of the save/restore of SRAM.  I
think when I asked before you argued that the save / restore is
important because on some Rockchip variants the same region of SRAM is
used for SMP processor bring up and for resume.  On those variants
it's important to save and restore.  Fine.

...but here you're in an rk3288 specific function.  There's no reason
to do the save/restore there.

NOTE: I think Kevin Hilman suggested only doing the copy once at init
time.  That's not a terrible suggestion unless someone is trashing
this region of SRAM.


...in my proposed adaptation of the suspend/resume to C code
<https://chromium-review.googlesource.com/#/c/225492/> I have removed
the save / restore but still copy it every time...


> +static void rk3288_fill_in_bootram(u32 level)
> +{
> +       rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8);
> +       rkpm_bootdata_cpu_code = virt_to_phys(cpu_resume);
> +
> +       rkpm_bootdata_l2ctlr_f  = 1;
> +       rkpm_bootdata_l2ctlr = rk3288_l2_config();
> +
> +       if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
> +               /*
> +               * In this mode the SDRAM power domain will be off,
> +               * so it need to be resumed,
> +               * but now the sdram resume code is not ready.
> +               * i have to set "rkpm_bootdata_ddr_code" 0.
> +               */
> +               rkpm_bootdata_ddr_code = 0;
> +       } else {
> +               rkpm_bootdata_ddr_code = 0;
> +       }

Keven requested to just remove the SDRAM stubs for now.  We can readd
once we have SDRAM code.
diff mbox

Patch

diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index b29d8ea..5c3a9b2 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -1,4 +1,5 @@ 
 CFLAGS_platsmp.o := -march=armv7-a
 
 obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip.o
+obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
new file mode 100644
index 0000000..3a0e117
--- /dev/null
+++ b/arch/arm/mach-rockchip/pm.c
@@ -0,0 +1,305 @@ 
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Tony Xie <tony.xie@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/suspend.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/suspend.h>
+
+#include "pm.h"
+
+struct rockchip_pm_device_id {
+	const char *compatible;
+	const struct platform_suspend_ops *ops;
+	int (*init)(void);
+};
+
+static char bootram_save_data[SZ_4K];
+
+static void __iomem *rk3288_bootram_base;
+static phys_addr_t rk3288_bootram_phy;
+
+static struct regmap *pmu_regmap;
+static struct regmap *sgrf_regmap;
+
+static inline void rk3288_copy_data_to_sram(void)
+{
+	/* save boot sram data in ddr mem */
+	memcpy(bootram_save_data, rk3288_bootram_base, rk3288_bootram_sz);
+
+	/* move resume code and data to bootsram */
+	memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume,
+	       rk3288_bootram_sz);
+}
+
+static inline void rk3288_restore_original_sram(void)
+{
+	memcpy(rk3288_bootram_base, bootram_save_data,  rk3288_bootram_sz);
+}
+
+static inline u32 rk3288_l2_config(void)
+{
+	u32 l2ctlr;
+
+	asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (l2ctlr));
+	return l2ctlr;
+}
+
+static void rk3288_fill_in_bootram(u32 level)
+{
+	rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8);
+	rkpm_bootdata_cpu_code = virt_to_phys(cpu_resume);
+
+	rkpm_bootdata_l2ctlr_f  = 1;
+	rkpm_bootdata_l2ctlr = rk3288_l2_config();
+
+	if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
+		/*
+		* In this mode the SDRAM power domain will be off,
+		* so it need to be resumed,
+		* but now the sdram resume code is not ready.
+		* i have to set "rkpm_bootdata_ddr_code" 0.
+		*/
+		rkpm_bootdata_ddr_code = 0;
+	} else {
+		rkpm_bootdata_ddr_code = 0;
+	}
+
+	rk3288_copy_data_to_sram();
+}
+
+static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_sgrf_soc_con0;
+
+static void rk3288_slp_mode_set(int level)
+{
+	u32 mode_set, mode_set1;
+
+	regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
+
+	regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
+		    &rk3288_pmu_pwr_mode_con);
+
+	/* set bit 8 so that system will resume to FAST_BOOT_ADDR */
+	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
+		     BIT(SGRF_FAST_BOOT_EN) | BIT(SGRF_FAST_BOOT_EN + 16));
+
+	/* booting address of resuming system is from this register value */
+	regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
+		     rk3288_bootram_phy);
+
+	regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
+		     PMU_ARMINT_WAKEUP_EN);
+
+	mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) |
+		   BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) |
+		   BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) |
+		   BIT(PMU_PWR_MODE_EN) | BIT(PMU_CHIP_PD_EN) |
+		   BIT(PMU_SCU_EN);
+
+	mode_set1 = BIT(PMU_CLR_CORE) | BIT(PMU_CLR_CPUP);
+
+	if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) {
+		/* arm off, logic deep sleep */
+		mode_set |= BIT(PMU_BUS_PD_EN) |
+			    BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) |
+			    BIT(PMU_OSC_24M_DIS) | BIT(PMU_PMU_USE_LF) |
+			    BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN);
+
+		mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
+			     BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
+
+	} else {
+		/*
+		 * arm off, logic normal
+		 * if pmu_clk_core_src_gate_en is not set,
+		 * wakeup will be error
+		 */
+		mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN);
+	}
+
+	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set);
+
+	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON1, mode_set1);
+}
+
+static void rk3288_slp_mode_set_resume(void)
+{
+	regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON,
+		     rk3288_pmu_pwr_mode_con);
+
+	regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
+		     rk3288_sgrf_soc_con0 | BIT(SGRF_FAST_BOOT_EN + 16));
+}
+
+/*
+ * level: used to control the level of sleep mode.
+ * ROCKCHIP_ARM_OFF_LOGIC_NORMAL : arm is off and logic is in normal
+ * sleep mode.
+ * ROCKCHIP_ARM_OFF_LOGIC_DEEP : arm is off and logic is in deep sleep mode
+ */
+static void rk3288_save_settings(u32 level)
+{
+	rk3288_fill_in_bootram(level);
+
+	rk3288_slp_mode_set(level);
+}
+
+static void rk3288_restore_settings(void)
+{
+	rk3288_slp_mode_set_resume();
+
+	rk3288_restore_original_sram();
+}
+
+static int rockchip_lpmode_enter(unsigned long arg)
+{
+	flush_cache_all();
+
+	cpu_do_idle();
+
+	pr_info("Failed to suspend the system\n");
+
+	return 1;
+}
+
+static int rk3288_suspend_enter(suspend_state_t state)
+{
+	local_fiq_disable();
+
+	rk3288_save_settings(ROCKCHIP_ARM_OFF_LOGIC_NORMAL);
+
+	cpu_suspend(0, rockchip_lpmode_enter);
+
+	rk3288_restore_settings();
+
+	local_fiq_enable();
+
+	return 0;
+}
+
+static int rk3288_suspend_prepare(void)
+{
+	return regulator_suspend_prepare(PM_SUSPEND_MEM);
+}
+
+static void rk3288_suspend_finish(void)
+{
+	if (regulator_suspend_finish())
+		pr_warn("suspend finish failed\n");
+}
+
+static int rk3288_suspend_iomap(void)
+{
+	struct device_node *node;
+	struct resource res;
+
+	node = of_find_compatible_node(NULL, NULL, "rockchip,rk3288-pmu-sram");
+	if (!node) {
+		pr_err("%s: could not find bootram dt node\n", __func__);
+		return -1;
+	}
+
+	rk3288_bootram_base = of_iomap(node, 0);
+	if (!rk3288_bootram_base) {
+		pr_err("%s: could not map bootram base\n", __func__);
+		return -1;
+	}
+
+	if (of_address_to_resource(node, 0, &res)) {
+		pr_err("%s: could not get bootram phy addr\n", __func__);
+		return -1;
+	}
+
+	rk3288_bootram_phy = res.start;
+
+	return 0;
+}
+
+static int rk3288_suspend_init(void)
+{
+	int ret;
+
+	pmu_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-pmu");
+
+	if (IS_ERR(pmu_regmap)) {
+		pr_err("%s: could not find pmu regmap\n", __func__);
+		return -1;
+	}
+
+	sgrf_regmap = syscon_regmap_lookup_by_compatible(
+				"rockchip,rk3288-sgrf");
+
+	if (IS_ERR(sgrf_regmap)) {
+		pr_err("%s: could not find sgrf regmap\n", __func__);
+		return -1;
+	}
+
+	ret = rk3288_suspend_iomap();
+
+	return ret;
+}
+
+static const struct platform_suspend_ops rk3288_suspend_ops = {
+	.enter   = rk3288_suspend_enter,
+	.valid   = suspend_valid_only_mem,
+	.prepare = rk3288_suspend_prepare,
+	.finish  = rk3288_suspend_finish,
+};
+
+static const struct rockchip_pm_device_id rockchip_pm_dt_match[] __initconst = {
+	{
+		.compatible = "rockchip,rk3288",
+		.ops = &rk3288_suspend_ops,
+		.init = rk3288_suspend_init,
+	},
+	{ /* sentinel */ },
+};
+
+void __init rockchip_suspend_init(void)
+{
+	const struct rockchip_pm_device_id *matches =
+		rockchip_pm_dt_match;
+
+	while (matches->compatible && matches->ops) {
+		if (of_machine_is_compatible(matches->compatible))
+			break;
+		matches++;
+	}
+
+	if (!matches->compatible || !matches->ops) {
+		pr_err("%s:there is not a machine matched\n", __func__);
+		return;
+	}
+
+	if (matches->init) {
+		if (matches->init()) {
+			pr_err("%s: matches init error\n", __func__);
+			return;
+		}
+	}
+
+	suspend_set_ops(matches->ops);
+}
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
new file mode 100644
index 0000000..781ea9d
--- /dev/null
+++ b/arch/arm/mach-rockchip/pm.h
@@ -0,0 +1,103 @@ 
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Tony Xie <tony.xie@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __MACH_ROCKCHIP_PM_H
+#define __MACH_ROCKCHIP_PM_H
+
+extern unsigned long rkpm_bootdata_cpusp;
+extern unsigned long rkpm_bootdata_cpu_code;
+extern unsigned long rkpm_bootdata_l2ctlr_f;
+extern unsigned long rkpm_bootdata_l2ctlr;
+extern unsigned long rkpm_bootdata_ddr_code;
+extern unsigned long rkpm_bootdata_ddr_data;
+extern unsigned long rk3288_bootram_sz;
+/* The function selction of low power mode */
+/* arm is off and logic is in normal sleep mode */
+#define ROCKCHIP_ARM_OFF_LOGIC_NORMAL (0)
+/* arm is off and logic is in deep sleep mode */
+#define ROCKCHIP_ARM_OFF_LOGIC_DEEP (1)
+
+void rockchip_slp_cpu_resume(void);
+void __init rockchip_suspend_init(void);
+
+/****** following is rk3288 defined **********/
+#define RK3288_PMU_WAKEUP_CFG0          0x00
+#define RK3288_PMU_WAKEUP_CFG1          0x04
+#define RK3288_PMU_PWRMODE_CON          0x18
+#define RK3288_PMU_OSC_CNT              0x20
+#define RK3288_PMU_PLL_CNT              0x24
+#define RK3288_PMU_STABL_CNT            0x28
+#define RK3288_PMU_DDR0IO_PWRON_CNT     0x2c
+#define RK3288_PMU_DDR1IO_PWRON_CNT     0x30
+#define RK3288_PMU_CORE_PWRDWN_CNT      0x34
+#define RK3288_PMU_CORE_PWRUP_CNT       0x38
+#define RK3288_PMU_GPU_PWRDWN_CNT       0x3c
+#define RK3288_PMU_GPU_PWRUP_CNT        0x40
+#define RK3288_PMU_WAKEUP_RST_CLR_CNT   0x44
+#define RK3288_PMU_PWRMODE_CON1         0x90
+
+#define RK3288_SGRF_SOC_CON0            (0x0000)
+#define RK3288_SGRF_FAST_BOOT_ADDR      (0x0120)
+#define SGRF_FAST_BOOT_EN (8)
+
+#define RK3288_CRU_MODE_CON (0x50)
+#define RK3288_CRU_SEL0_CON (0x60)
+#define RK3288_CRU_SEL1_CON (0x64)
+#define RK3288_CRU_SEL10_CON (0x88)
+#define RK3288_CRU_SEL33_CON (0xe4)
+#define RK3288_CRU_SEL37_CON (0xf4)
+
+/* PMU_WAKEUP_CFG1 bits */
+#define PMU_ARMINT_WAKEUP_EN BIT(0)
+
+enum rk3288_pwr_mode_con {
+	PMU_PWR_MODE_EN = 0,
+	PMU_CLK_CORE_SRC_GATE_EN,
+	PMU_GLOBAL_INT_DISABLE,
+	PMU_L2FLUSH_EN,
+	PMU_BUS_PD_EN,
+	PMU_A12_0_PD_EN,
+	PMU_SCU_EN,
+	PMU_PLL_PD_EN,
+	PMU_CHIP_PD_EN, /* POWER OFF PIN ENABLE */
+	PMU_PWROFF_COMB,
+	PMU_ALIVE_USE_LF,
+	PMU_PMU_USE_LF,
+	PMU_OSC_24M_DIS,
+	PMU_INPUT_CLAMP_EN,
+	PMU_WAKEUP_RESET_EN,
+	PMU_SREF0_ENTER_EN,
+	PMU_SREF1_ENTER_EN,
+	PMU_DDR0IO_RET_EN,
+	PMU_DDR1IO_RET_EN,
+	PMU_DDR0_GATING_EN,
+	PMU_DDR1_GATING_EN,
+	PMU_DDR0IO_RET_DE_REQ,
+	PMU_DDR1IO_RET_DE_REQ
+};
+
+enum rk3288_pwr_mode_con1 {
+	PMU_CLR_BUS = 0,
+	PMU_CLR_CORE,
+	PMU_CLR_CPUP,
+	PMU_CLR_ALIVE,
+	PMU_CLR_DMA,
+	PMU_CLR_PERI,
+	PMU_CLR_GPU,
+	PMU_CLR_VIDEO,
+	PMU_CLR_HEVC,
+	PMU_CLR_VIO,
+};
+
+#endif /* __MACH_ROCKCHIP_PM_H */
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 8ab9e0e..3ae34eb 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -23,6 +23,12 @@ 
 #include <asm/mach/map.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "core.h"
+#include "pm.h"
+
+static void __init rockchip_dt_init(void)
+{
+	rockchip_suspend_init();
+}
 
 static const char * const rockchip_board_dt_compat[] = {
 	"rockchip,rk2928",
@@ -37,4 +43,5 @@  DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
 	.dt_compat	= rockchip_board_dt_compat,
+	.init_machine	= rockchip_dt_init,
 MACHINE_END
diff --git a/arch/arm/mach-rockchip/sleep.S b/arch/arm/mach-rockchip/sleep.S
new file mode 100644
index 0000000..e1c5b8c
--- /dev/null
+++ b/arch/arm/mach-rockchip/sleep.S
@@ -0,0 +1,90 @@ 
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Tony Xie <tony.xie@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/memory.h>
+
+.data
+/*
+ * this code will be copied from
+ * ddr to sram for system resumeing.
+ * so it is ".data section".
+ */
+.align
+
+ENTRY(rockchip_slp_cpu_resume)
+	setmode	PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1  @ set svc, irqs off
+	mrc	p15, 0, r1, c0, c0, 5
+	and	r1, r1, #0xf
+	cmp	r1, #0
+	/* olny cpu0 can continue to run, the others is halt here */
+	beq	cpu0run
+secondary_loop:
+	wfe
+	b	secondary_loop
+cpu0run:
+	ldr	r3, rkpm_bootdata_l2ctlr_f
+	cmp	r3, #0
+	beq	sp_set
+	ldr	r3, rkpm_bootdata_l2ctlr
+	mcr	p15, 1, r3, c9, c0, 2
+sp_set:
+	ldr	sp, rkpm_bootdata_cpusp
+
+	ldr	r1, rkpm_bootdata_ddr_code
+	cmp	r1, #0
+	beq	res
+	ldr	r0, rkpm_bootdata_ddr_data
+	blx	r1
+res:
+	ldr	r1, rkpm_bootdata_cpu_code
+	bx	r1
+ENDPROC(rockchip_slp_cpu_resume)
+
+/* Parameters filled in by the kernel */
+
+/* Code to jump to for DDR resume code, or NULL */
+	.global rkpm_bootdata_ddr_code
+rkpm_bootdata_ddr_code:
+	.long 0
+
+/* Data to pass to DDR resume data */
+	.global rkpm_bootdata_ddr_data
+rkpm_bootdata_ddr_data:
+	.long 0
+
+/* Flag for whether to restore L2CTLR on resume */
+	.global rkpm_bootdata_l2ctlr_f
+rkpm_bootdata_l2ctlr_f:
+	.long 0
+
+/* Saved L2CTLR to restore on resume */
+	.global rkpm_bootdata_l2ctlr
+rkpm_bootdata_l2ctlr:
+	.long 0
+
+/* CPU resume SP addr */
+	.globl rkpm_bootdata_cpusp
+rkpm_bootdata_cpusp:
+	.long 0
+
+/* CPU resume function (physical address) */
+	.globl rkpm_bootdata_cpu_code
+rkpm_bootdata_cpu_code:
+	.long 0
+
+ENTRY(rk3288_bootram_sz)
+        .word   . - rockchip_slp_cpu_resume