| Message ID | 1415637706-2195-1-git-send-email-lorenzo.pieralisi@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Mon, Nov 10, 2014 at 04:41:46PM +0000, Lorenzo Pieralisi wrote: > The current logic used for PCI domain assignment in arm64 > pci_bus_assign_domain_nr() is flawed in that, depending on the host > controllers configuration for a platform and the respective initialization > sequence, core code may end up allocating PCI domain numbers from both DT and > the core code generic domain counter, which would result in PCI domain > allocation aliases/errors. > > This patch fixes the logic behind the PCI domain number assignment and > moves the resulting code to generic PCI core code so that the same domain > allocation logic is used on all platforms selecting > > CONFIG_PCI_DOMAINS_GENERIC > > instead of resorting to an arch specific implementation that might end up > duplicating the PCI domain assignment logic wrongly. > > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > --- > v1 => v2: > > - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of > adding an OF layer API > - Updated commit log and code comments Is this approach ok with everyone ? I would need to have this patch queued so that I can rebase the ARM32 pcibios pci_sys_data domain removal on top of it, if everyone agrees of course. Thanks ! Lorenzo > > arch/arm64/kernel/pci.c | 22 ---------------------- > drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 50 insertions(+), 22 deletions(-) > > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c > index ce5836c..6f93c24 100644 > --- a/arch/arm64/kernel/pci.c > +++ b/arch/arm64/kernel/pci.c > @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) > > return 0; > } > - > - > -#ifdef CONFIG_PCI_DOMAINS_GENERIC > -static bool dt_domain_found = false; > - > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > -{ > - int domain = of_get_pci_domain_nr(parent->of_node); > - > - if (domain >= 0) { > - dt_domain_found = true; > - } else if (dt_domain_found == true) { > - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", > - parent->of_node->full_name); > - return; > - } else { > - domain = pci_get_new_domain_nr(); > - } > - > - bus->domain_nr = domain; > -} > -#endif > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 625a4ac..2279414 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -10,6 +10,8 @@ > #include <linux/kernel.h> > #include <linux/delay.h> > #include <linux/init.h> > +#include <linux/of.h> > +#include <linux/of_pci.h> > #include <linux/pci.h> > #include <linux/pm.h> > #include <linux/slab.h> > @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) > { > return atomic_inc_return(&__domain_nr); > } > + > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > + > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > +{ > + static int use_dt_domains = -1; > + int domain = of_get_pci_domain_nr(parent->of_node); > + > + /* > + * Check DT domain and use_dt_domains values. > + * > + * If DT domain property is valid (domain >= 0) and > + * use_dt_domains != 0, the DT assignment is valid since this means > + * we have not previously allocated a domain number by using > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > + * 1, to indicate that we have just assigned a domain number from > + * DT. > + * > + * If DT domain property value is not valid (ie domain < 0), and we > + * have not previously assigned a domain number from DT > + * (use_dt_domains != 1) we should assign a domain number by > + * using the: > + * > + * pci_get_new_domain_nr() > + * > + * API and update the use_dt_domains value to keep track of method we > + * are using to assign domain numbers (use_dt_domains = 0). > + * > + * All other combinations imply we have a platform that is trying > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > + * which is a recipe for domain mishandling and it is prevented by > + * invalidating the domain value (domain = -1) and printing a > + * corresponding error. > + */ > + if (domain >= 0 && use_dt_domains) { > + use_dt_domains = 1; > + } else if (domain < 0 && use_dt_domains != 1) { > + use_dt_domains = 0; > + domain = pci_get_new_domain_nr(); > + } else { > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > + parent->of_node->full_name); > + domain = -1; > + } > + > + bus->domain_nr = domain; > +} > +#endif > #endif > > /** > -- > 2.1.2 > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Nov 12, 2014 at 10:09:44AM +0000, Lorenzo Pieralisi wrote: > On Mon, Nov 10, 2014 at 04:41:46PM +0000, Lorenzo Pieralisi wrote: > > The current logic used for PCI domain assignment in arm64 > > pci_bus_assign_domain_nr() is flawed in that, depending on the host > > controllers configuration for a platform and the respective initialization > > sequence, core code may end up allocating PCI domain numbers from both DT and > > the core code generic domain counter, which would result in PCI domain > > allocation aliases/errors. > > > > This patch fixes the logic behind the PCI domain number assignment and > > moves the resulting code to generic PCI core code so that the same domain > > allocation logic is used on all platforms selecting > > > > CONFIG_PCI_DOMAINS_GENERIC > > > > instead of resorting to an arch specific implementation that might end up > > duplicating the PCI domain assignment logic wrongly. > > > > Cc: Arnd Bergmann <arnd@arndb.de> > > Cc: Liviu Dudau <liviu.dudau@arm.com> > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > --- > > v1 => v2: > > > > - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of > > adding an OF layer API > > - Updated commit log and code comments > > Is this approach ok with everyone ? I would need to have this patch > queued so that I can rebase the ARM32 pcibios pci_sys_data domain removal > on top of it, if everyone agrees of course. Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Best regards, Liviu > > Thanks ! > Lorenzo > > > > > arch/arm64/kernel/pci.c | 22 ---------------------- > > drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 50 insertions(+), 22 deletions(-) > > > > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c > > index ce5836c..6f93c24 100644 > > --- a/arch/arm64/kernel/pci.c > > +++ b/arch/arm64/kernel/pci.c > > @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) > > > > return 0; > > } > > - > > - > > -#ifdef CONFIG_PCI_DOMAINS_GENERIC > > -static bool dt_domain_found = false; > > - > > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > -{ > > - int domain = of_get_pci_domain_nr(parent->of_node); > > - > > - if (domain >= 0) { > > - dt_domain_found = true; > > - } else if (dt_domain_found == true) { > > - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", > > - parent->of_node->full_name); > > - return; > > - } else { > > - domain = pci_get_new_domain_nr(); > > - } > > - > > - bus->domain_nr = domain; > > -} > > -#endif > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 625a4ac..2279414 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -10,6 +10,8 @@ > > #include <linux/kernel.h> > > #include <linux/delay.h> > > #include <linux/init.h> > > +#include <linux/of.h> > > +#include <linux/of_pci.h> > > #include <linux/pci.h> > > #include <linux/pm.h> > > #include <linux/slab.h> > > @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) > > { > > return atomic_inc_return(&__domain_nr); > > } > > + > > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > > + > > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > +{ > > + static int use_dt_domains = -1; > > + int domain = of_get_pci_domain_nr(parent->of_node); > > + > > + /* > > + * Check DT domain and use_dt_domains values. > > + * > > + * If DT domain property is valid (domain >= 0) and > > + * use_dt_domains != 0, the DT assignment is valid since this means > > + * we have not previously allocated a domain number by using > > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > > + * 1, to indicate that we have just assigned a domain number from > > + * DT. > > + * > > + * If DT domain property value is not valid (ie domain < 0), and we > > + * have not previously assigned a domain number from DT > > + * (use_dt_domains != 1) we should assign a domain number by > > + * using the: > > + * > > + * pci_get_new_domain_nr() > > + * > > + * API and update the use_dt_domains value to keep track of method we > > + * are using to assign domain numbers (use_dt_domains = 0). > > + * > > + * All other combinations imply we have a platform that is trying > > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > > + * which is a recipe for domain mishandling and it is prevented by > > + * invalidating the domain value (domain = -1) and printing a > > + * corresponding error. > > + */ > > + if (domain >= 0 && use_dt_domains) { > > + use_dt_domains = 1; > > + } else if (domain < 0 && use_dt_domains != 1) { > > + use_dt_domains = 0; > > + domain = pci_get_new_domain_nr(); > > + } else { > > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > > + parent->of_node->full_name); > > + domain = -1; > > + } > > + > > + bus->domain_nr = domain; > > +} > > +#endif > > #endif > > > > /** > > -- > > 2.1.2 > > > > >
On Monday 10 November 2014 16:41:46 Lorenzo Pieralisi wrote: > The current logic used for PCI domain assignment in arm64 > pci_bus_assign_domain_nr() is flawed in that, depending on the host > controllers configuration for a platform and the respective initialization > sequence, core code may end up allocating PCI domain numbers from both DT and > the core code generic domain counter, which would result in PCI domain > allocation aliases/errors. > > This patch fixes the logic behind the PCI domain number assignment and > moves the resulting code to generic PCI core code so that the same domain > allocation logic is used on all platforms selecting > > CONFIG_PCI_DOMAINS_GENERIC > > instead of resorting to an arch specific implementation that might end up > duplicating the PCI domain assignment logic wrongly. > > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> The general approach seems good to me, Acked-by: Arnd Bergmann <arnd@arndb.de> I would suggest one simplification: > + > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > + > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > +{ > + static int use_dt_domains = -1; > + int domain = of_get_pci_domain_nr(parent->of_node); > + > + /* > + * Check DT domain and use_dt_domains values. > + * > + * If DT domain property is valid (domain >= 0) and > + * use_dt_domains != 0, the DT assignment is valid since this means > + * we have not previously allocated a domain number by using > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > + * 1, to indicate that we have just assigned a domain number from > + * DT. > + * > + * If DT domain property value is not valid (ie domain < 0), and we > + * have not previously assigned a domain number from DT > + * (use_dt_domains != 1) we should assign a domain number by > + * using the: > + * > + * pci_get_new_domain_nr() > + * > + * API and update the use_dt_domains value to keep track of method we > + * are using to assign domain numbers (use_dt_domains = 0). > + * > + * All other combinations imply we have a platform that is trying > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > + * which is a recipe for domain mishandling and it is prevented by > + * invalidating the domain value (domain = -1) and printing a > + * corresponding error. > + */ > + if (domain >= 0 && use_dt_domains) { > + use_dt_domains = 1; > + } else if (domain < 0 && use_dt_domains != 1) { > + use_dt_domains = 0; > + domain = pci_get_new_domain_nr(); > + } else { > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > + parent->of_node->full_name); > + domain = -1; > + } > + > + bus->domain_nr = domain; > +} > +#endif > #endif > Since this is now in the file in which it gets called, you can mark the function itself as 'static' and remove the extern declaration and inline wrapper from the header file. You can also avoid the #ifdef by doing void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) { static int use_dt_domains = -1; int domain = of_get_pci_domain_nr(parent->of_node); if (!IS_ENABLED(CONFIG_PCI_DOMAINS_GENERIC)) return; ... } Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Nov 12, 2014 at 10:39:17AM +0000, Arnd Bergmann wrote: > On Monday 10 November 2014 16:41:46 Lorenzo Pieralisi wrote: > > The current logic used for PCI domain assignment in arm64 > > pci_bus_assign_domain_nr() is flawed in that, depending on the host > > controllers configuration for a platform and the respective initialization > > sequence, core code may end up allocating PCI domain numbers from both DT and > > the core code generic domain counter, which would result in PCI domain > > allocation aliases/errors. > > > > This patch fixes the logic behind the PCI domain number assignment and > > moves the resulting code to generic PCI core code so that the same domain > > allocation logic is used on all platforms selecting > > > > CONFIG_PCI_DOMAINS_GENERIC > > > > instead of resorting to an arch specific implementation that might end up > > duplicating the PCI domain assignment logic wrongly. > > > > Cc: Arnd Bergmann <arnd@arndb.de> > > Cc: Liviu Dudau <liviu.dudau@arm.com> > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > The general approach seems good to me, > > Acked-by: Arnd Bergmann <arnd@arndb.de> > > I would suggest one simplification: > > > + > > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > > + > > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > +{ > > + static int use_dt_domains = -1; > > + int domain = of_get_pci_domain_nr(parent->of_node); > > + > > + /* > > + * Check DT domain and use_dt_domains values. > > + * > > + * If DT domain property is valid (domain >= 0) and > > + * use_dt_domains != 0, the DT assignment is valid since this means > > + * we have not previously allocated a domain number by using > > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > > + * 1, to indicate that we have just assigned a domain number from > > + * DT. > > + * > > + * If DT domain property value is not valid (ie domain < 0), and we > > + * have not previously assigned a domain number from DT > > + * (use_dt_domains != 1) we should assign a domain number by > > + * using the: > > + * > > + * pci_get_new_domain_nr() > > + * > > + * API and update the use_dt_domains value to keep track of method we > > + * are using to assign domain numbers (use_dt_domains = 0). > > + * > > + * All other combinations imply we have a platform that is trying > > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > > + * which is a recipe for domain mishandling and it is prevented by > > + * invalidating the domain value (domain = -1) and printing a > > + * corresponding error. > > + */ > > + if (domain >= 0 && use_dt_domains) { > > + use_dt_domains = 1; > > + } else if (domain < 0 && use_dt_domains != 1) { > > + use_dt_domains = 0; > > + domain = pci_get_new_domain_nr(); > > + } else { > > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > > + parent->of_node->full_name); > > + domain = -1; > > + } > > + > > + bus->domain_nr = domain; > > +} > > +#endif > > #endif > > > > Since this is now in the file in which it gets called, you can mark the > function itself as 'static' and remove the extern declaration and inline > wrapper from the header file. You can also avoid the #ifdef by doing It is not, it is in driver/pci/pci.c, it is called in probe.c. Maybe I can move the function to probe.c, but this would leave the domain handling in two separate files. I can't remove the #ifdeffery in that domain_nr in pci_bus is #ifdeffed too, unless I remove that #ifdef and I compile it in all the time. Thanks all for the review, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday 12 November 2014 14:14:29 Lorenzo Pieralisi wrote: > > > > Since this is now in the file in which it gets called, you can mark the > > function itself as 'static' and remove the extern declaration and inline > > wrapper from the header file. You can also avoid the #ifdef by doing > > It is not, it is in driver/pci/pci.c, it is called in probe.c. > > Maybe I can move the function to probe.c, but this would leave the > domain handling in two separate files. > > I can't remove the #ifdeffery in that domain_nr in pci_bus is #ifdeffed > too, unless I remove that #ifdef and I compile it in all the time. > Right, I see. Unless Bjorn has some other preference, I'd just leave it with your current version then. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Lorenzo, You should send this to Bjorn instead of cc. Other, why put the OF related function in PCI core. Why not move it in drivers/of/of_pci.c ? On 2014/11/11 0:41, Lorenzo Pieralisi wrote: > The current logic used for PCI domain assignment in arm64 > pci_bus_assign_domain_nr() is flawed in that, depending on the host > controllers configuration for a platform and the respective initialization > sequence, core code may end up allocating PCI domain numbers from both DT and > the core code generic domain counter, which would result in PCI domain > allocation aliases/errors. > > This patch fixes the logic behind the PCI domain number assignment and > moves the resulting code to generic PCI core code so that the same domain > allocation logic is used on all platforms selecting > > CONFIG_PCI_DOMAINS_GENERIC > > instead of resorting to an arch specific implementation that might end up > duplicating the PCI domain assignment logic wrongly. > > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > --- > v1 => v2: > > - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of > adding an OF layer API > - Updated commit log and code comments > > arch/arm64/kernel/pci.c | 22 ---------------------- > drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 50 insertions(+), 22 deletions(-) > > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c > index ce5836c..6f93c24 100644 > --- a/arch/arm64/kernel/pci.c > +++ b/arch/arm64/kernel/pci.c > @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) > > return 0; > } > - > - > -#ifdef CONFIG_PCI_DOMAINS_GENERIC > -static bool dt_domain_found = false; > - > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > -{ > - int domain = of_get_pci_domain_nr(parent->of_node); > - > - if (domain >= 0) { > - dt_domain_found = true; > - } else if (dt_domain_found == true) { > - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", > - parent->of_node->full_name); > - return; > - } else { > - domain = pci_get_new_domain_nr(); > - } > - > - bus->domain_nr = domain; > -} > -#endif > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 625a4ac..2279414 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -10,6 +10,8 @@ > #include <linux/kernel.h> > #include <linux/delay.h> > #include <linux/init.h> > +#include <linux/of.h> > +#include <linux/of_pci.h> > #include <linux/pci.h> > #include <linux/pm.h> > #include <linux/slab.h> > @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) > { > return atomic_inc_return(&__domain_nr); > } > + > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > + > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > +{ > + static int use_dt_domains = -1; > + int domain = of_get_pci_domain_nr(parent->of_node); > + > + /* > + * Check DT domain and use_dt_domains values. > + * > + * If DT domain property is valid (domain >= 0) and > + * use_dt_domains != 0, the DT assignment is valid since this means > + * we have not previously allocated a domain number by using > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > + * 1, to indicate that we have just assigned a domain number from > + * DT. > + * > + * If DT domain property value is not valid (ie domain < 0), and we > + * have not previously assigned a domain number from DT > + * (use_dt_domains != 1) we should assign a domain number by > + * using the: > + * > + * pci_get_new_domain_nr() > + * > + * API and update the use_dt_domains value to keep track of method we > + * are using to assign domain numbers (use_dt_domains = 0). > + * > + * All other combinations imply we have a platform that is trying > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > + * which is a recipe for domain mishandling and it is prevented by > + * invalidating the domain value (domain = -1) and printing a > + * corresponding error. > + */ > + if (domain >= 0 && use_dt_domains) { > + use_dt_domains = 1; > + } else if (domain < 0 && use_dt_domains != 1) { > + use_dt_domains = 0; > + domain = pci_get_new_domain_nr(); > + } else { > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > + parent->of_node->full_name); > + domain = -1; > + } > + > + bus->domain_nr = domain; > +} > +#endif > #endif > > /** >
On Wed, Nov 19, 2014 at 09:16:34AM +0000, Yijing Wang wrote: > Hi Lorenzo, > You should send this to Bjorn instead of cc. Other, why put the OF related > function in PCI core. Why not move it in drivers/of/of_pci.c ? I did, you missed v1, and the problem is that with ACPI forthcoming we do not want to have domain assignment scattered in different places, but part of core code (ie a single function that prevents mixed initialization from DT/counter and so on). Bjorn, are you fine with this patch ? Do you want me to resend it as part of the ARM 32 PCI domain refactoring [1] ? [1] depends on this patch going in first. Thanks, Lorenzo [1] http://www.spinics.net/lists/arm-kernel/msg375423.html > On 2014/11/11 0:41, Lorenzo Pieralisi wrote: > > The current logic used for PCI domain assignment in arm64 > > pci_bus_assign_domain_nr() is flawed in that, depending on the host > > controllers configuration for a platform and the respective initialization > > sequence, core code may end up allocating PCI domain numbers from both DT and > > the core code generic domain counter, which would result in PCI domain > > allocation aliases/errors. > > > > This patch fixes the logic behind the PCI domain number assignment and > > moves the resulting code to generic PCI core code so that the same domain > > allocation logic is used on all platforms selecting > > > > CONFIG_PCI_DOMAINS_GENERIC > > > > instead of resorting to an arch specific implementation that might end up > > duplicating the PCI domain assignment logic wrongly. > > > > Cc: Arnd Bergmann <arnd@arndb.de> > > Cc: Liviu Dudau <liviu.dudau@arm.com> > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > --- > > v1 => v2: > > > > - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of > > adding an OF layer API > > - Updated commit log and code comments > > > > arch/arm64/kernel/pci.c | 22 ---------------------- > > drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 50 insertions(+), 22 deletions(-) > > > > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c > > index ce5836c..6f93c24 100644 > > --- a/arch/arm64/kernel/pci.c > > +++ b/arch/arm64/kernel/pci.c > > @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) > > > > return 0; > > } > > - > > - > > -#ifdef CONFIG_PCI_DOMAINS_GENERIC > > -static bool dt_domain_found = false; > > - > > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > -{ > > - int domain = of_get_pci_domain_nr(parent->of_node); > > - > > - if (domain >= 0) { > > - dt_domain_found = true; > > - } else if (dt_domain_found == true) { > > - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", > > - parent->of_node->full_name); > > - return; > > - } else { > > - domain = pci_get_new_domain_nr(); > > - } > > - > > - bus->domain_nr = domain; > > -} > > -#endif > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 625a4ac..2279414 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -10,6 +10,8 @@ > > #include <linux/kernel.h> > > #include <linux/delay.h> > > #include <linux/init.h> > > +#include <linux/of.h> > > +#include <linux/of_pci.h> > > #include <linux/pci.h> > > #include <linux/pm.h> > > #include <linux/slab.h> > > @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) > > { > > return atomic_inc_return(&__domain_nr); > > } > > + > > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > > + > > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > +{ > > + static int use_dt_domains = -1; > > + int domain = of_get_pci_domain_nr(parent->of_node); > > + > > + /* > > + * Check DT domain and use_dt_domains values. > > + * > > + * If DT domain property is valid (domain >= 0) and > > + * use_dt_domains != 0, the DT assignment is valid since this means > > + * we have not previously allocated a domain number by using > > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > > + * 1, to indicate that we have just assigned a domain number from > > + * DT. > > + * > > + * If DT domain property value is not valid (ie domain < 0), and we > > + * have not previously assigned a domain number from DT > > + * (use_dt_domains != 1) we should assign a domain number by > > + * using the: > > + * > > + * pci_get_new_domain_nr() > > + * > > + * API and update the use_dt_domains value to keep track of method we > > + * are using to assign domain numbers (use_dt_domains = 0). > > + * > > + * All other combinations imply we have a platform that is trying > > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > > + * which is a recipe for domain mishandling and it is prevented by > > + * invalidating the domain value (domain = -1) and printing a > > + * corresponding error. > > + */ > > + if (domain >= 0 && use_dt_domains) { > > + use_dt_domains = 1; > > + } else if (domain < 0 && use_dt_domains != 1) { > > + use_dt_domains = 0; > > + domain = pci_get_new_domain_nr(); > > + } else { > > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > > + parent->of_node->full_name); > > + domain = -1; > > + } > > + > > + bus->domain_nr = domain; > > +} > > +#endif > > #endif > > > > /** > > > > > -- > Thanks! > Yijing > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Nov 10, 2014 at 04:41:46PM +0000, Lorenzo Pieralisi wrote: > The current logic used for PCI domain assignment in arm64 > pci_bus_assign_domain_nr() is flawed in that, depending on the host > controllers configuration for a platform and the respective initialization > sequence, core code may end up allocating PCI domain numbers from both DT and > the core code generic domain counter, which would result in PCI domain > allocation aliases/errors. > > This patch fixes the logic behind the PCI domain number assignment and > moves the resulting code to generic PCI core code so that the same domain > allocation logic is used on all platforms selecting > > CONFIG_PCI_DOMAINS_GENERIC > > instead of resorting to an arch specific implementation that might end up > duplicating the PCI domain assignment logic wrongly. > > Cc: Arnd Bergmann <arnd@arndb.de> > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Applied with Liviu and Arnd's acks to pci/domain for v3.19, thanks. It doesn't matter whether I'm in the to: or cc: list. The important thing is that it appears on the linux-pci list, because I use patchwork as my to-do list, and patchwork only vacuums up stuff from linux-pci. > --- > v1 => v2: > > - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of > adding an OF layer API > - Updated commit log and code comments > > arch/arm64/kernel/pci.c | 22 ---------------------- > drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 50 insertions(+), 22 deletions(-) > > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c > index ce5836c..6f93c24 100644 > --- a/arch/arm64/kernel/pci.c > +++ b/arch/arm64/kernel/pci.c > @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) > > return 0; > } > - > - > -#ifdef CONFIG_PCI_DOMAINS_GENERIC > -static bool dt_domain_found = false; > - > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > -{ > - int domain = of_get_pci_domain_nr(parent->of_node); > - > - if (domain >= 0) { > - dt_domain_found = true; > - } else if (dt_domain_found == true) { > - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", > - parent->of_node->full_name); > - return; > - } else { > - domain = pci_get_new_domain_nr(); > - } > - > - bus->domain_nr = domain; > -} > -#endif > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 625a4ac..2279414 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -10,6 +10,8 @@ > #include <linux/kernel.h> > #include <linux/delay.h> > #include <linux/init.h> > +#include <linux/of.h> > +#include <linux/of_pci.h> > #include <linux/pci.h> > #include <linux/pm.h> > #include <linux/slab.h> > @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) > { > return atomic_inc_return(&__domain_nr); > } > + > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > + > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > +{ > + static int use_dt_domains = -1; > + int domain = of_get_pci_domain_nr(parent->of_node); > + > + /* > + * Check DT domain and use_dt_domains values. > + * > + * If DT domain property is valid (domain >= 0) and > + * use_dt_domains != 0, the DT assignment is valid since this means > + * we have not previously allocated a domain number by using > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > + * 1, to indicate that we have just assigned a domain number from > + * DT. > + * > + * If DT domain property value is not valid (ie domain < 0), and we > + * have not previously assigned a domain number from DT > + * (use_dt_domains != 1) we should assign a domain number by > + * using the: > + * > + * pci_get_new_domain_nr() > + * > + * API and update the use_dt_domains value to keep track of method we > + * are using to assign domain numbers (use_dt_domains = 0). > + * > + * All other combinations imply we have a platform that is trying > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > + * which is a recipe for domain mishandling and it is prevented by > + * invalidating the domain value (domain = -1) and printing a > + * corresponding error. > + */ > + if (domain >= 0 && use_dt_domains) { > + use_dt_domains = 1; > + } else if (domain < 0 && use_dt_domains != 1) { > + use_dt_domains = 0; > + domain = pci_get_new_domain_nr(); > + } else { > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > + parent->of_node->full_name); > + domain = -1; > + } > + > + bus->domain_nr = domain; > +} > +#endif > #endif > > /** > -- > 2.1.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 19 Nov 2014 09:39:48 +0000 , Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote: > On Wed, Nov 19, 2014 at 09:16:34AM +0000, Yijing Wang wrote: > > Hi Lorenzo, > > You should send this to Bjorn instead of cc. Other, why put the OF related > > function in PCI core. Why not move it in drivers/of/of_pci.c ? > > I did, you missed v1, and the problem is that with ACPI forthcoming we > do not want to have domain assignment scattered in different places, > but part of core code (ie a single function that prevents mixed > initialization from DT/counter and so on). Bus specific OF code has generally been moving into the individual subsystems. SPI and I2C are the prime examples. It's easier to coordinate with the generic subsystem code when it lives in the same place. The PCI code still lives in drivers/of/ simply because nobody has been motivated enough to refactor it. > > Bjorn, are you fine with this patch ? Do you want me to resend it as > part of the ARM 32 PCI domain refactoring [1] ? [1] depends on this > patch going in first. > > Thanks, > Lorenzo > > [1] http://www.spinics.net/lists/arm-kernel/msg375423.html > > > On 2014/11/11 0:41, Lorenzo Pieralisi wrote: > > > The current logic used for PCI domain assignment in arm64 > > > pci_bus_assign_domain_nr() is flawed in that, depending on the host > > > controllers configuration for a platform and the respective initialization > > > sequence, core code may end up allocating PCI domain numbers from both DT and > > > the core code generic domain counter, which would result in PCI domain > > > allocation aliases/errors. > > > > > > This patch fixes the logic behind the PCI domain number assignment and > > > moves the resulting code to generic PCI core code so that the same domain > > > allocation logic is used on all platforms selecting > > > > > > CONFIG_PCI_DOMAINS_GENERIC > > > > > > instead of resorting to an arch specific implementation that might end up > > > duplicating the PCI domain assignment logic wrongly. > > > > > > Cc: Arnd Bergmann <arnd@arndb.de> > > > Cc: Liviu Dudau <liviu.dudau@arm.com> > > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > > Cc: Rob Herring <robh+dt@kernel.org> > > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > > --- > > > v1 => v2: > > > > > > - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of > > > adding an OF layer API > > > - Updated commit log and code comments > > > > > > arch/arm64/kernel/pci.c | 22 ---------------------- > > > drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ > > > 2 files changed, 50 insertions(+), 22 deletions(-) > > > > > > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c > > > index ce5836c..6f93c24 100644 > > > --- a/arch/arm64/kernel/pci.c > > > +++ b/arch/arm64/kernel/pci.c > > > @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) > > > > > > return 0; > > > } > > > - > > > - > > > -#ifdef CONFIG_PCI_DOMAINS_GENERIC > > > -static bool dt_domain_found = false; > > > - > > > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > > -{ > > > - int domain = of_get_pci_domain_nr(parent->of_node); > > > - > > > - if (domain >= 0) { > > > - dt_domain_found = true; > > > - } else if (dt_domain_found == true) { > > > - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", > > > - parent->of_node->full_name); > > > - return; > > > - } else { > > > - domain = pci_get_new_domain_nr(); > > > - } > > > - > > > - bus->domain_nr = domain; > > > -} > > > -#endif > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > index 625a4ac..2279414 100644 > > > --- a/drivers/pci/pci.c > > > +++ b/drivers/pci/pci.c > > > @@ -10,6 +10,8 @@ > > > #include <linux/kernel.h> > > > #include <linux/delay.h> > > > #include <linux/init.h> > > > +#include <linux/of.h> > > > +#include <linux/of_pci.h> > > > #include <linux/pci.h> > > > #include <linux/pm.h> > > > #include <linux/slab.h> > > > @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) > > > { > > > return atomic_inc_return(&__domain_nr); > > > } > > > + > > > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > > > + > > > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > > +{ > > > + static int use_dt_domains = -1; > > > + int domain = of_get_pci_domain_nr(parent->of_node); > > > + > > > + /* > > > + * Check DT domain and use_dt_domains values. > > > + * > > > + * If DT domain property is valid (domain >= 0) and > > > + * use_dt_domains != 0, the DT assignment is valid since this means > > > + * we have not previously allocated a domain number by using > > > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > > > + * 1, to indicate that we have just assigned a domain number from > > > + * DT. > > > + * > > > + * If DT domain property value is not valid (ie domain < 0), and we > > > + * have not previously assigned a domain number from DT > > > + * (use_dt_domains != 1) we should assign a domain number by > > > + * using the: > > > + * > > > + * pci_get_new_domain_nr() > > > + * > > > + * API and update the use_dt_domains value to keep track of method we > > > + * are using to assign domain numbers (use_dt_domains = 0). > > > + * > > > + * All other combinations imply we have a platform that is trying > > > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > > > + * which is a recipe for domain mishandling and it is prevented by > > > + * invalidating the domain value (domain = -1) and printing a > > > + * corresponding error. > > > + */ > > > + if (domain >= 0 && use_dt_domains) { > > > + use_dt_domains = 1; > > > + } else if (domain < 0 && use_dt_domains != 1) { > > > + use_dt_domains = 0; > > > + domain = pci_get_new_domain_nr(); > > > + } else { > > > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > > > + parent->of_node->full_name); > > > + domain = -1; > > > + } > > > + > > > + bus->domain_nr = domain; > > > +} > > > +#endif > > > #endif > > > > > > /** > > > > > > > > > -- > > Thanks! > > Yijing > > > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Bjorn, On Thu, Nov 20, 2014 at 10:54:49PM +0000, Bjorn Helgaas wrote: > On Mon, Nov 10, 2014 at 04:41:46PM +0000, Lorenzo Pieralisi wrote: > > The current logic used for PCI domain assignment in arm64 > > pci_bus_assign_domain_nr() is flawed in that, depending on the host > > controllers configuration for a platform and the respective initialization > > sequence, core code may end up allocating PCI domain numbers from both DT and > > the core code generic domain counter, which would result in PCI domain > > allocation aliases/errors. > > > > This patch fixes the logic behind the PCI domain number assignment and > > moves the resulting code to generic PCI core code so that the same domain > > allocation logic is used on all platforms selecting > > > > CONFIG_PCI_DOMAINS_GENERIC > > > > instead of resorting to an arch specific implementation that might end up > > duplicating the PCI domain assignment logic wrongly. > > > > Cc: Arnd Bergmann <arnd@arndb.de> > > Cc: Liviu Dudau <liviu.dudau@arm.com> > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Rob Herring <robh+dt@kernel.org> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > Applied with Liviu and Arnd's acks to pci/domain for v3.19, thanks. > > It doesn't matter whether I'm in the to: or cc: list. The important thing > is that it appears on the linux-pci list, because I use patchwork as my > to-do list, and patchwork only vacuums up stuff from linux-pci. This patch has not been merged last cycle and it is a prerequisite for the ARM pcibios domain code removal patchset you merged in your pci/domain branch. Please consider pulling it there so that the ARM pcibios domain removal patchset can be based correctly on top of this patch, at the moment it can't compile (see kbuild test report). Thanks, Lorenzo > > --- > > v1 => v2: > > > > - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of > > adding an OF layer API > > - Updated commit log and code comments > > > > arch/arm64/kernel/pci.c | 22 ---------------------- > > drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 50 insertions(+), 22 deletions(-) > > > > diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c > > index ce5836c..6f93c24 100644 > > --- a/arch/arm64/kernel/pci.c > > +++ b/arch/arm64/kernel/pci.c > > @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) > > > > return 0; > > } > > - > > - > > -#ifdef CONFIG_PCI_DOMAINS_GENERIC > > -static bool dt_domain_found = false; > > - > > -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > -{ > > - int domain = of_get_pci_domain_nr(parent->of_node); > > - > > - if (domain >= 0) { > > - dt_domain_found = true; > > - } else if (dt_domain_found == true) { > > - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", > > - parent->of_node->full_name); > > - return; > > - } else { > > - domain = pci_get_new_domain_nr(); > > - } > > - > > - bus->domain_nr = domain; > > -} > > -#endif > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 625a4ac..2279414 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -10,6 +10,8 @@ > > #include <linux/kernel.h> > > #include <linux/delay.h> > > #include <linux/init.h> > > +#include <linux/of.h> > > +#include <linux/of_pci.h> > > #include <linux/pci.h> > > #include <linux/pm.h> > > #include <linux/slab.h> > > @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) > > { > > return atomic_inc_return(&__domain_nr); > > } > > + > > +#ifdef CONFIG_PCI_DOMAINS_GENERIC > > + > > +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) > > +{ > > + static int use_dt_domains = -1; > > + int domain = of_get_pci_domain_nr(parent->of_node); > > + > > + /* > > + * Check DT domain and use_dt_domains values. > > + * > > + * If DT domain property is valid (domain >= 0) and > > + * use_dt_domains != 0, the DT assignment is valid since this means > > + * we have not previously allocated a domain number by using > > + * pci_get_new_domain_nr(); we should also update use_dt_domains to > > + * 1, to indicate that we have just assigned a domain number from > > + * DT. > > + * > > + * If DT domain property value is not valid (ie domain < 0), and we > > + * have not previously assigned a domain number from DT > > + * (use_dt_domains != 1) we should assign a domain number by > > + * using the: > > + * > > + * pci_get_new_domain_nr() > > + * > > + * API and update the use_dt_domains value to keep track of method we > > + * are using to assign domain numbers (use_dt_domains = 0). > > + * > > + * All other combinations imply we have a platform that is trying > > + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), > > + * which is a recipe for domain mishandling and it is prevented by > > + * invalidating the domain value (domain = -1) and printing a > > + * corresponding error. > > + */ > > + if (domain >= 0 && use_dt_domains) { > > + use_dt_domains = 1; > > + } else if (domain < 0 && use_dt_domains != 1) { > > + use_dt_domains = 0; > > + domain = pci_get_new_domain_nr(); > > + } else { > > + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", > > + parent->of_node->full_name); > > + domain = -1; > > + } > > + > > + bus->domain_nr = domain; > > +} > > +#endif > > #endif > > > > /** > > -- > > 2.1.2 > > > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Dec 27, 2014 at 3:36 AM, Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> wrote: > Hi Bjorn, > > On Thu, Nov 20, 2014 at 10:54:49PM +0000, Bjorn Helgaas wrote: >> On Mon, Nov 10, 2014 at 04:41:46PM +0000, Lorenzo Pieralisi wrote: >> > The current logic used for PCI domain assignment in arm64 >> > pci_bus_assign_domain_nr() is flawed in that, depending on the host >> > controllers configuration for a platform and the respective initialization >> > sequence, core code may end up allocating PCI domain numbers from both DT and >> > the core code generic domain counter, which would result in PCI domain >> > allocation aliases/errors. >> > >> > This patch fixes the logic behind the PCI domain number assignment and >> > moves the resulting code to generic PCI core code so that the same domain >> > allocation logic is used on all platforms selecting >> > >> > CONFIG_PCI_DOMAINS_GENERIC >> > >> > instead of resorting to an arch specific implementation that might end up >> > duplicating the PCI domain assignment logic wrongly. >> > >> > Cc: Arnd Bergmann <arnd@arndb.de> >> > Cc: Liviu Dudau <liviu.dudau@arm.com> >> > Cc: Bjorn Helgaas <bhelgaas@google.com> >> > Cc: Rob Herring <robh+dt@kernel.org> >> > Cc: Catalin Marinas <catalin.marinas@arm.com> >> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> >> >> Applied with Liviu and Arnd's acks to pci/domain for v3.19, thanks. >> >> It doesn't matter whether I'm in the to: or cc: list. The important thing >> is that it appears on the linux-pci list, because I use patchwork as my >> to-do list, and patchwork only vacuums up stuff from linux-pci. > > This patch has not been merged last cycle and it is a prerequisite for > the ARM pcibios domain code removal patchset you merged in your pci/domain > branch. Please consider pulling it there so that the ARM pcibios domain > removal patchset can be based correctly on top of this patch, at the > moment it can't compile (see kbuild test report). Huh, I can't remember why I didn't merge that for v3.19. Maybe I just missed it by mistake. Anyway, I picked that patch into pci/domain for another try. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index ce5836c..6f93c24 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -46,25 +46,3 @@ int pcibios_add_device(struct pci_dev *dev) return 0; } - - -#ifdef CONFIG_PCI_DOMAINS_GENERIC -static bool dt_domain_found = false; - -void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) -{ - int domain = of_get_pci_domain_nr(parent->of_node); - - if (domain >= 0) { - dt_domain_found = true; - } else if (dt_domain_found == true) { - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n", - parent->of_node->full_name); - return; - } else { - domain = pci_get_new_domain_nr(); - } - - bus->domain_nr = domain; -} -#endif diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 625a4ac..2279414 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -10,6 +10,8 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/of.h> +#include <linux/of_pci.h> #include <linux/pci.h> #include <linux/pm.h> #include <linux/slab.h> @@ -4447,6 +4449,54 @@ int pci_get_new_domain_nr(void) { return atomic_inc_return(&__domain_nr); } + +#ifdef CONFIG_PCI_DOMAINS_GENERIC + +void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent) +{ + static int use_dt_domains = -1; + int domain = of_get_pci_domain_nr(parent->of_node); + + /* + * Check DT domain and use_dt_domains values. + * + * If DT domain property is valid (domain >= 0) and + * use_dt_domains != 0, the DT assignment is valid since this means + * we have not previously allocated a domain number by using + * pci_get_new_domain_nr(); we should also update use_dt_domains to + * 1, to indicate that we have just assigned a domain number from + * DT. + * + * If DT domain property value is not valid (ie domain < 0), and we + * have not previously assigned a domain number from DT + * (use_dt_domains != 1) we should assign a domain number by + * using the: + * + * pci_get_new_domain_nr() + * + * API and update the use_dt_domains value to keep track of method we + * are using to assign domain numbers (use_dt_domains = 0). + * + * All other combinations imply we have a platform that is trying + * to mix domain numbers obtained from DT and pci_get_new_domain_nr(), + * which is a recipe for domain mishandling and it is prevented by + * invalidating the domain value (domain = -1) and printing a + * corresponding error. + */ + if (domain >= 0 && use_dt_domains) { + use_dt_domains = 1; + } else if (domain < 0 && use_dt_domains != 1) { + use_dt_domains = 0; + domain = pci_get_new_domain_nr(); + } else { + dev_err(parent, "Node %s has inconsistent \"linux,pci-domain\" property in DT\n", + parent->of_node->full_name); + domain = -1; + } + + bus->domain_nr = domain; +} +#endif #endif /**
The current logic used for PCI domain assignment in arm64 pci_bus_assign_domain_nr() is flawed in that, depending on the host controllers configuration for a platform and the respective initialization sequence, core code may end up allocating PCI domain numbers from both DT and the core code generic domain counter, which would result in PCI domain allocation aliases/errors. This patch fixes the logic behind the PCI domain number assignment and moves the resulting code to generic PCI core code so that the same domain allocation logic is used on all platforms selecting CONFIG_PCI_DOMAINS_GENERIC instead of resorting to an arch specific implementation that might end up duplicating the PCI domain assignment logic wrongly. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> --- v1 => v2: - Moved generic pci_bus_assign_domain_nr() code to PCI core instead of adding an OF layer API - Updated commit log and code comments arch/arm64/kernel/pci.c | 22 ---------------------- drivers/pci/pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 22 deletions(-)