| Message ID | 1417193071-801-1-git-send-email-pawel.moll@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Friday 28 November 2014 16:44:31 Pawel Moll wrote: > The MMCI driver, when used with a Device Tree described device, relies > on the "vmmc" voltage regulator supply to set the OCR register voltage bits, > using MMC core's mmc_regulator_get_supply() function. > > Without the regulator framework present there are no valid operating > voltages reported and the device initialisation fails: > > mmci-pl18x 10005000.mmci: No vmmc regulator found > mmci-pl18x 10005000.mmci: no support for card's volts > mmc0: error -22 whilst initialising SD card > > Signed-off-by: Pawel Moll <pawel.moll@arm.com> > Applied on top, thanks! Arnd
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 9a96bab..d6b16d9 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -16,6 +16,7 @@ menuconfig ARCH_VEXPRESS select POWER_RESET select POWER_RESET_VEXPRESS select POWER_SUPPLY + select REGULATOR if MMC_ARMMMCI select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG select VEXPRESS_SYSCFG
The MMCI driver, when used with a Device Tree described device, relies on the "vmmc" voltage regulator supply to set the OCR register voltage bits, using MMC core's mmc_regulator_get_supply() function. Without the regulator framework present there are no valid operating voltages reported and the device initialisation fails: mmci-pl18x 10005000.mmci: No vmmc regulator found mmci-pl18x 10005000.mmci: no support for card's volts mmc0: error -22 whilst initialising SD card Signed-off-by: Pawel Moll <pawel.moll@arm.com> --- arch/arm/mach-vexpress/Kconfig | 1 + 1 file changed, 1 insertion(+)