diff mbox

[v2] drivers: net : cpsw: Update Kconfig for CPSW

Message ID 1417668869-25616-1-git-send-email-lokeshvutla@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Lokesh Vutla Dec. 4, 2014, 4:54 a.m. UTC 
CPSW is present in AM33xx, AM43xx, DRA7xx.
Updating the Kconfig to depend on ARCH_OMAP2PLUS instead of listing
all SoC's.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 drivers/net/ethernet/ti/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Mugunthan V N Dec. 4, 2014, 6:17 a.m. UTC | #1 
On Thursday 04 December 2014 10:24 AM, Lokesh Vutla wrote:
> CPSW is present in AM33xx, AM43xx, DRA7xx.
> Updating the Kconfig to depend on ARCH_OMAP2PLUS instead of listing
> all SoC's.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Acked-by: Mugunthan V N <mugunthanvnm@ti.com>

Regards
Mugunthan V N
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Felipe Balbi Dec. 4, 2014, 2:48 p.m. UTC | #2 
On Thu, Dec 04, 2014 at 10:24:29AM +0530, Lokesh Vutla wrote:
> CPSW is present in AM33xx, AM43xx, DRA7xx.
> Updating the Kconfig to depend on ARCH_OMAP2PLUS instead of listing
> all SoC's.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Reviewed-by: Felipe Balbi <balbi@ti.com>

> ---
>  drivers/net/ethernet/ti/Kconfig | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
> index 5d8cb79..7051255 100644
> --- a/drivers/net/ethernet/ti/Kconfig
> +++ b/drivers/net/ethernet/ti/Kconfig
> @@ -5,7 +5,7 @@
>  config NET_VENDOR_TI
>  	bool "Texas Instruments (TI) devices"
>  	default y
> -	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE))
> +	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
>  	---help---
>  	  If you have a network (Ethernet) card belonging to this class, say Y
>  	  and read the Ethernet-HOWTO, available from
> @@ -32,7 +32,7 @@ config TI_DAVINCI_EMAC
>  
>  config TI_DAVINCI_MDIO
>  	tristate "TI DaVinci MDIO Support"
> -	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE )
> +	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
>  	select PHYLIB
>  	---help---
>  	  This driver supports TI's DaVinci MDIO module.
> @@ -42,7 +42,7 @@ config TI_DAVINCI_MDIO
>  
>  config TI_DAVINCI_CPDMA
>  	tristate "TI DaVinci CPDMA Support"
> -	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
> +	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
>  	---help---
>  	  This driver supports TI's DaVinci CPDMA dma engine.
>  
> @@ -58,7 +58,7 @@ config TI_CPSW_PHY_SEL
>  
>  config TI_CPSW
>  	tristate "TI CPSW Switch Support"
> -	depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
> +	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
>  	select TI_DAVINCI_CPDMA
>  	select TI_DAVINCI_MDIO
>  	select TI_CPSW_PHY_SEL
> -- 
> 1.9.1
>
David Miller Dec. 9, 2014, 6:44 p.m. UTC | #3 
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Thu, 4 Dec 2014 10:24:29 +0530

> CPSW is present in AM33xx, AM43xx, DRA7xx.
> Updating the Kconfig to depend on ARCH_OMAP2PLUS instead of listing
> all SoC's.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to net-next, thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 5d8cb79..7051255 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -5,7 +5,7 @@ 
 config NET_VENDOR_TI
 	bool "Texas Instruments (TI) devices"
 	default y
-	depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE))
+	depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -32,7 +32,7 @@  config TI_DAVINCI_EMAC
 
 config TI_DAVINCI_MDIO
 	tristate "TI DaVinci MDIO Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX || ARCH_KEYSTONE )
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
 	select PHYLIB
 	---help---
 	  This driver supports TI's DaVinci MDIO module.
@@ -42,7 +42,7 @@  config TI_DAVINCI_MDIO
 
 config TI_DAVINCI_CPDMA
 	tristate "TI DaVinci CPDMA Support"
-	depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
 	---help---
 	  This driver supports TI's DaVinci CPDMA dma engine.
 
@@ -58,7 +58,7 @@  config TI_CPSW_PHY_SEL
 
 config TI_CPSW
 	tristate "TI CPSW Switch Support"
-	depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
+	depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
 	select TI_DAVINCI_CPDMA
 	select TI_DAVINCI_MDIO
 	select TI_CPSW_PHY_SEL