| Message ID | 1417738572-10441-1-git-send-email-sbranden@broadcom.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Chris, I have not received any feedback on this patch for the SDHCI controller. Anything I can do to help get this accepted into the codebase? Thanks, Scott On 14-12-04 04:16 PM, Scott Branden wrote: > Add quirk to handle broken auto-CMD23. > Some controllers do not respond after the first auto-CMD23 is issued. > > This allows CMD23 to still work (mandatory for the faster UHS-I mode) > rather than disabling CMD23 entirely via SDHCI_QUIRK2_HOST_NO_CMD23. > > Signed-off by: Corneliu Doban <cdoban@broadcom.com> > Signed-off-by: Scott Branden <sbranden@broadcom.com> > --- > drivers/mmc/host/sdhci.c | 3 ++- > include/linux/mmc/sdhci.h | 2 ++ > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index ada1a3e..b37331f 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -2985,7 +2985,8 @@ int sdhci_add_host(struct sdhci_host *host) > /* Auto-CMD23 stuff only works in ADMA or PIO. */ > if ((host->version >= SDHCI_SPEC_300) && > ((host->flags & SDHCI_USE_ADMA) || > - !(host->flags & SDHCI_USE_SDMA))) { > + !(host->flags & SDHCI_USE_SDMA)) && > + !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) { > host->flags |= SDHCI_AUTO_CMD23; > DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); > } else { > diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h > index dba793e..d979cf9 100644 > --- a/include/linux/mmc/sdhci.h > +++ b/include/linux/mmc/sdhci.h > @@ -100,6 +100,8 @@ struct sdhci_host { > #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) > /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ > #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) > +/* Controller broken with using ACMD23 */ > +#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<9) > > int irq; /* Device IRQ */ > void __iomem *ioaddr; /* Mapped address */ > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Scott, sorry for the delay, On Fri, Dec 05 2014, Scott Branden wrote: > Add quirk to handle broken auto-CMD23. > Some controllers do not respond after the first auto-CMD23 is issued. > > This allows CMD23 to still work (mandatory for the faster UHS-I mode) > rather than disabling CMD23 entirely via SDHCI_QUIRK2_HOST_NO_CMD23. > > Signed-off by: Corneliu Doban <cdoban@broadcom.com> > Signed-off-by: Scott Branden <sbranden@broadcom.com> > --- > drivers/mmc/host/sdhci.c | 3 ++- > include/linux/mmc/sdhci.h | 2 ++ > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index ada1a3e..b37331f 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -2985,7 +2985,8 @@ int sdhci_add_host(struct sdhci_host *host) > /* Auto-CMD23 stuff only works in ADMA or PIO. */ > if ((host->version >= SDHCI_SPEC_300) && > ((host->flags & SDHCI_USE_ADMA) || > - !(host->flags & SDHCI_USE_SDMA))) { > + !(host->flags & SDHCI_USE_SDMA)) && > + !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) { > host->flags |= SDHCI_AUTO_CMD23; > DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); > } else { > diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h > index dba793e..d979cf9 100644 > --- a/include/linux/mmc/sdhci.h > +++ b/include/linux/mmc/sdhci.h > @@ -100,6 +100,8 @@ struct sdhci_host { > #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) > /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ > #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) > +/* Controller broken with using ACMD23 */ > +#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<9) > > int irq; /* Device IRQ */ > void __iomem *ioaddr; /* Mapped address */ This patch doesn't apply the quirk to any chipsets, so the patch doesn't actually change any behavior when run on a mainline kernel. Do you have a patch to apply the quirk to your chipset too? We don't typically accept patches that "don't do anything" for mainline users, so that's why we'd like to see the chipset patch too. Thanks, - Chris.
Hi Chris, We'll finish off cleaning up our driver that uses this patch for review then. Thanks, Scott On 14-12-17 11:48 AM, Chris Ball wrote: > Hi Scott, sorry for the delay, > > On Fri, Dec 05 2014, Scott Branden wrote: >> Add quirk to handle broken auto-CMD23. >> Some controllers do not respond after the first auto-CMD23 is issued. >> >> This allows CMD23 to still work (mandatory for the faster UHS-I mode) >> rather than disabling CMD23 entirely via SDHCI_QUIRK2_HOST_NO_CMD23. >> >> Signed-off by: Corneliu Doban <cdoban@broadcom.com> >> Signed-off-by: Scott Branden <sbranden@broadcom.com> >> --- >> drivers/mmc/host/sdhci.c | 3 ++- >> include/linux/mmc/sdhci.h | 2 ++ >> 2 files changed, 4 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c >> index ada1a3e..b37331f 100644 >> --- a/drivers/mmc/host/sdhci.c >> +++ b/drivers/mmc/host/sdhci.c >> @@ -2985,7 +2985,8 @@ int sdhci_add_host(struct sdhci_host *host) >> /* Auto-CMD23 stuff only works in ADMA or PIO. */ >> if ((host->version >= SDHCI_SPEC_300) && >> ((host->flags & SDHCI_USE_ADMA) || >> - !(host->flags & SDHCI_USE_SDMA))) { >> + !(host->flags & SDHCI_USE_SDMA)) && >> + !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) { >> host->flags |= SDHCI_AUTO_CMD23; >> DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); >> } else { >> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h >> index dba793e..d979cf9 100644 >> --- a/include/linux/mmc/sdhci.h >> +++ b/include/linux/mmc/sdhci.h >> @@ -100,6 +100,8 @@ struct sdhci_host { >> #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) >> /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ >> #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) >> +/* Controller broken with using ACMD23 */ >> +#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<9) >> >> int irq; /* Device IRQ */ >> void __iomem *ioaddr; /* Mapped address */ > > This patch doesn't apply the quirk to any chipsets, so the patch > doesn't actually change any behavior when run on a mainline kernel. > Do you have a patch to apply the quirk to your chipset too? We don't > typically accept patches that "don't do anything" for mainline users, > so that's why we'd like to see the chipset patch too. > > Thanks, > > - Chris. > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ada1a3e..b37331f 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2985,7 +2985,8 @@ int sdhci_add_host(struct sdhci_host *host) /* Auto-CMD23 stuff only works in ADMA or PIO. */ if ((host->version >= SDHCI_SPEC_300) && ((host->flags & SDHCI_USE_ADMA) || - !(host->flags & SDHCI_USE_SDMA))) { + !(host->flags & SDHCI_USE_SDMA)) && + !(host->quirks2 & SDHCI_QUIRK2_ACMD23_BROKEN)) { host->flags |= SDHCI_AUTO_CMD23; DBG("%s: Auto-CMD23 available\n", mmc_hostname(mmc)); } else { diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index dba793e..d979cf9 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -100,6 +100,8 @@ struct sdhci_host { #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) +/* Controller broken with using ACMD23 */ +#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<9) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */
Add quirk to handle broken auto-CMD23. Some controllers do not respond after the first auto-CMD23 is issued. This allows CMD23 to still work (mandatory for the faster UHS-I mode) rather than disabling CMD23 entirely via SDHCI_QUIRK2_HOST_NO_CMD23. Signed-off by: Corneliu Doban <cdoban@broadcom.com> Signed-off-by: Scott Branden <sbranden@broadcom.com> --- drivers/mmc/host/sdhci.c | 3 ++- include/linux/mmc/sdhci.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-)