Message ID | 1417084891-17990-4-git-send-email-peter.ujfalusi@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Thu, Nov 27, 2014 at 12:41:31PM +0200, Peter Ujfalusi wrote: > include/linux/platform_data/ is not a correct place to keep the API > definitions for edma, it is meant to be only for the pdata for the device. > Clean up this by moving the API to include/linux/edma.h > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > --- > arch/arm/common/edma.c | 3 +- > arch/arm/mach-davinci/devices.c | 1 + > arch/arm/mach-davinci/include/mach/da8xx.h | 1 + > drivers/dma/edma.c | 2 +- > include/linux/edma.h | 153 +++++++++++++++++++++++++++++ > include/linux/platform_data/edma.h | 148 ++-------------------------- > sound/soc/davinci/davinci-pcm.h | 1 + > 7 files changed, 165 insertions(+), 144 deletions(-) > create mode 100644 include/linux/edma.h I was hoping that this will have delete for platform_data/edma.h, do we still need that and why shouldn't we get rid of this :)
On Monday 08 December 2014 18:19:17 Vinod Koul wrote: > On Thu, Nov 27, 2014 at 12:41:31PM +0200, Peter Ujfalusi wrote: > > include/linux/platform_data/ is not a correct place to keep the API > > definitions for edma, it is meant to be only for the pdata for the device. > > Clean up this by moving the API to include/linux/edma.h > > > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > > --- > > arch/arm/common/edma.c | 3 +- > > arch/arm/mach-davinci/devices.c | 1 + > > arch/arm/mach-davinci/include/mach/da8xx.h | 1 + > > drivers/dma/edma.c | 2 +- > > include/linux/edma.h | 153 +++++++++++++++++++++++++++++ > > include/linux/platform_data/edma.h | 148 ++-------------------------- > > sound/soc/davinci/davinci-pcm.h | 1 + > > 7 files changed, 165 insertions(+), 144 deletions(-) > > create mode 100644 include/linux/edma.h > I was hoping that this will have delete for platform_data/edma.h, do we > still need that and why shouldn't we get rid of this I think the platform_data/edma.h file is needed for as long as we have mach-davinci systems that are not converted to boot using DT. At the current pace of development in that area, I would expect that to take a few more years at least: da850 support is slowly proceeding (since 2012), da830 should be fairly straightforward to add once da850 is done, but I haven't seen anybody start working on the dm* socs for DT. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/08/2014 02:49 PM, Vinod Koul wrote: > On Thu, Nov 27, 2014 at 12:41:31PM +0200, Peter Ujfalusi wrote: >> include/linux/platform_data/ is not a correct place to keep the API >> definitions for edma, it is meant to be only for the pdata for the device. >> Clean up this by moving the API to include/linux/edma.h >> >> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> >> --- >> arch/arm/common/edma.c | 3 +- >> arch/arm/mach-davinci/devices.c | 1 + >> arch/arm/mach-davinci/include/mach/da8xx.h | 1 + >> drivers/dma/edma.c | 2 +- >> include/linux/edma.h | 153 +++++++++++++++++++++++++++++ >> include/linux/platform_data/edma.h | 148 ++-------------------------- >> sound/soc/davinci/davinci-pcm.h | 1 + >> 7 files changed, 165 insertions(+), 144 deletions(-) >> create mode 100644 include/linux/edma.h > I was hoping that this will have delete for platform_data/edma.h, do we > still need that and why shouldn't we get rid of this :) We still need it for the legacy boot of davinci devices. We can boot some davinci SoC/boards with DT, but not all of them.
Hi, On Thu, Nov 27, 2014 at 2:41 AM, Peter Ujfalusi <peter.ujfalusi@ti.com> wrote: > include/linux/platform_data/ is not a correct place to keep the API > definitions for edma, it is meant to be only for the pdata for the device. > Clean up this by moving the API to include/linux/edma.h It's a nice net improvement, but it moves some things that should be in _neither_ location to a new place where it doesn't belong either -- and the new location is even more global. See below. ... > diff --git a/include/linux/edma.h b/include/linux/edma.h > new file mode 100644 > index 000000000000..9df92198c117 > --- /dev/null > +++ b/include/linux/edma.h > @@ -0,0 +1,153 @@ > +/* > + * TI EDMA definitions > + * > + * Copyright (C) 2006-2013 Texas Instruments. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation version 2. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +/* > + * This EDMA3 programming framework exposes two basic kinds of resource: > + * > + * Channel Triggers transfers, usually from a hardware event but > + * also manually or by "chaining" from DMA completions. > + * Each channel is coupled to a Parameter RAM (PaRAM) slot. > + * > + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM > + * "set"), source and destination addresses, a link to a > + * next PaRAM slot (if any), options for the transfer, and > + * instructions for updating those addresses. There are > + * more than twice as many slots as event channels. > + * > + * Each PaRAM set describes a sequence of transfers, either for one large > + * buffer or for several discontiguous smaller buffers. An EDMA transfer > + * is driven only from a channel, which performs the transfers specified > + * in its PaRAM slot until there are no more transfers. When that last > + * transfer completes, the "link" field may be used to reload the channel's > + * PaRAM slot with a new transfer descriptor. > + * > + * The EDMA Channel Controller (CC) maps requests from channels into physical > + * Transfer Controller (TC) requests when the channel triggers (by hardware > + * or software events, or by chaining). The two physical DMA channels provided > + * by the TCs are thus shared by many logical channels. > + * > + * DaVinci hardware also has a "QDMA" mechanism which is not currently > + * supported through this interface. (DSP firmware uses it though.) > + */ > + > +#ifndef __LINUX_EDMA_H_ > +#define __LINUX_EDMA_H_ > + > +#include <linux/platform_data/edma.h> > + > +/* PaRAM slots are laid out like this */ > +struct edmacc_param { > + u32 opt; > + u32 src; > + u32 a_b_cnt; > + u32 dst; > + u32 src_dst_bidx; > + u32 link_bcntrld; > + u32 src_dst_cidx; > + u32 ccnt; > +} __packed; > + > +/* fields in edmacc_param.opt */ > +#define SAM BIT(0) > +#define DAM BIT(1) > +#define SYNCDIM BIT(2) > +#define STATIC BIT(3) > +#define EDMA_FWID (0x07 << 8) > +#define TCCMODE BIT(11) > +#define EDMA_TCC(t) ((t) << 12) > +#define TCINTEN BIT(20) > +#define ITCINTEN BIT(21) > +#define TCCHEN BIT(22) > +#define ITCCHEN BIT(23) This seems like the kind of thing that should go with the edma driver instead of being globally exported to the kernel through a include/linux header file. -Olof -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On 01/22/2015 03:40 AM, Olof Johansson wrote: > Hi, > > On Thu, Nov 27, 2014 at 2:41 AM, Peter Ujfalusi <peter.ujfalusi@ti.com> wrote: >> include/linux/platform_data/ is not a correct place to keep the API >> definitions for edma, it is meant to be only for the pdata for the device. >> Clean up this by moving the API to include/linux/edma.h > > It's a nice net improvement, but it moves some things that should be > in _neither_ location to a new place where it doesn't belong either -- > and the new location is even more global. See below. > > ... > >> diff --git a/include/linux/edma.h b/include/linux/edma.h >> new file mode 100644 >> index 000000000000..9df92198c117 >> --- /dev/null >> +++ b/include/linux/edma.h >> @@ -0,0 +1,153 @@ >> +/* >> + * TI EDMA definitions >> + * >> + * Copyright (C) 2006-2013 Texas Instruments. >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License as >> + * published by the Free Software Foundation version 2. >> + * >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any >> + * kind, whether express or implied; without even the implied warranty >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +/* >> + * This EDMA3 programming framework exposes two basic kinds of resource: >> + * >> + * Channel Triggers transfers, usually from a hardware event but >> + * also manually or by "chaining" from DMA completions. >> + * Each channel is coupled to a Parameter RAM (PaRAM) slot. >> + * >> + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM >> + * "set"), source and destination addresses, a link to a >> + * next PaRAM slot (if any), options for the transfer, and >> + * instructions for updating those addresses. There are >> + * more than twice as many slots as event channels. >> + * >> + * Each PaRAM set describes a sequence of transfers, either for one large >> + * buffer or for several discontiguous smaller buffers. An EDMA transfer >> + * is driven only from a channel, which performs the transfers specified >> + * in its PaRAM slot until there are no more transfers. When that last >> + * transfer completes, the "link" field may be used to reload the channel's >> + * PaRAM slot with a new transfer descriptor. >> + * >> + * The EDMA Channel Controller (CC) maps requests from channels into physical >> + * Transfer Controller (TC) requests when the channel triggers (by hardware >> + * or software events, or by chaining). The two physical DMA channels provided >> + * by the TCs are thus shared by many logical channels. >> + * >> + * DaVinci hardware also has a "QDMA" mechanism which is not currently >> + * supported through this interface. (DSP firmware uses it though.) >> + */ >> + >> +#ifndef __LINUX_EDMA_H_ >> +#define __LINUX_EDMA_H_ >> + >> +#include <linux/platform_data/edma.h> >> + >> +/* PaRAM slots are laid out like this */ >> +struct edmacc_param { >> + u32 opt; >> + u32 src; >> + u32 a_b_cnt; >> + u32 dst; >> + u32 src_dst_bidx; >> + u32 link_bcntrld; >> + u32 src_dst_cidx; >> + u32 ccnt; >> +} __packed; >> + >> +/* fields in edmacc_param.opt */ >> +#define SAM BIT(0) >> +#define DAM BIT(1) >> +#define SYNCDIM BIT(2) >> +#define STATIC BIT(3) >> +#define EDMA_FWID (0x07 << 8) >> +#define TCCMODE BIT(11) >> +#define EDMA_TCC(t) ((t) << 12) >> +#define TCINTEN BIT(20) >> +#define ITCINTEN BIT(21) >> +#define TCCHEN BIT(22) >> +#define ITCCHEN BIT(23) > > This seems like the kind of thing that should go with the edma driver > instead of being globally exported to the kernel through a > include/linux header file. Currently the edmacc_param struct is used by arch/arm/common/edma.c, drivers/dma/edma.c and the sound/soc/davinci/davinci-pcm.c For now this has to be in a global header file. Even with my local VIP branch where I had removed the davinci-pcm already the two drivers for edma needs this in global header file. I can assure you, it will be gone (along with the arch/arm/common/edma.c) but not right away.
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index bac677e65c76..6c49887d326e 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -25,6 +25,7 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/edma.h> #include <linux/edma-dmaengine.h> #include <linux/dma-mapping.h> #include <linux/of_address.h> @@ -33,8 +34,6 @@ #include <linux/of_irq.h> #include <linux/pm_runtime.h> -#include <linux/platform_data/edma.h> - /* Offsets matching "struct edmacc_param" */ #define PARM_OPT 0x00 #define PARM_SRC 0x04 diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 6257aa452568..28572ef24d9c 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,6 +23,7 @@ #include <linux/platform_data/mmc-davinci.h> #include <mach/time.h> #include <linux/platform_data/edma.h> +#include <linux/edma.h> #include "davinci.h" diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 39e58b48e826..313129cb6f4a 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -23,6 +23,7 @@ #include <mach/serial.h> #include <mach/pm.h> #include <linux/platform_data/edma.h> +#include <linux/edma.h> #include <linux/platform_data/i2c-davinci.h> #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 8880d6977e5d..126048e79dfc 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -25,7 +25,7 @@ #include <linux/spinlock.h> #include <linux/of.h> -#include <linux/platform_data/edma.h> +#include <linux/edma.h> #include "dmaengine.h" #include "virt-dma.h" diff --git a/include/linux/edma.h b/include/linux/edma.h new file mode 100644 index 000000000000..9df92198c117 --- /dev/null +++ b/include/linux/edma.h @@ -0,0 +1,153 @@ +/* + * TI EDMA definitions + * + * Copyright (C) 2006-2013 Texas Instruments. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef __LINUX_EDMA_H_ +#define __LINUX_EDMA_H_ + +#include <linux/platform_data/edma.h> + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + u32 opt; + u32 src; + u32 a_b_cnt; + u32 dst; + u32 src_dst_bidx; + u32 link_bcntrld; + u32 src_dst_cidx; + u32 ccnt; +} __packed; + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +/* ch_status parameter of callback function possible values*/ +#define EDMA_DMA_COMPLETE 1 +#define EDMA_DMA_CC_ERROR 2 +#define EDMA_DMA_TC1_ERROR 3 +#define EDMA_DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) +#define EDMA_CTLR(i) ((i) >> 16) +#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ +#define EDMA_CONT_PARAMS_ANY 1001 +#define EDMA_CONT_PARAMS_FIXED_EXACT 1002 +#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(unsigned ctlr, int slot); +void edma_free_slot(unsigned slot); + +/* alloc/free a set of contiguous parameter RAM slots */ +int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count); +int edma_free_cont_slots(unsigned slot, int count); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, enum address_mode mode, + enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, enum address_mode mode, + enum fifo_width); +dma_addr_t edma_get_position(unsigned slot, bool dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no); + +int edma_trigger_channel(unsigned); + +#endif /* __LINUX_EDMA_H_ */ diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h index bdb2710e2aab..aaf6fc5769eb 100644 --- a/include/linux/platform_data/edma.h +++ b/include/linux/platform_data/edma.h @@ -8,83 +8,10 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ - -/* - * This EDMA3 programming framework exposes two basic kinds of resource: - * - * Channel Triggers transfers, usually from a hardware event but - * also manually or by "chaining" from DMA completions. - * Each channel is coupled to a Parameter RAM (PaRAM) slot. - * - * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM - * "set"), source and destination addresses, a link to a - * next PaRAM slot (if any), options for the transfer, and - * instructions for updating those addresses. There are - * more than twice as many slots as event channels. - * - * Each PaRAM set describes a sequence of transfers, either for one large - * buffer or for several discontiguous smaller buffers. An EDMA transfer - * is driven only from a channel, which performs the transfers specified - * in its PaRAM slot until there are no more transfers. When that last - * transfer completes, the "link" field may be used to reload the channel's - * PaRAM slot with a new transfer descriptor. - * - * The EDMA Channel Controller (CC) maps requests from channels into physical - * Transfer Controller (TC) requests when the channel triggers (by hardware - * or software events, or by chaining). The two physical DMA channels provided - * by the TCs are thus shared by many logical channels. - * - * DaVinci hardware also has a "QDMA" mechanism which is not currently - * supported through this interface. (DSP firmware uses it though.) - */ - #ifndef EDMA_H_ #define EDMA_H_ -/* PaRAM slots are laid out like this */ -struct edmacc_param { - u32 opt; - u32 src; - u32 a_b_cnt; - u32 dst; - u32 src_dst_bidx; - u32 link_bcntrld; - u32 src_dst_cidx; - u32 ccnt; -} __packed; - -/* fields in edmacc_param.opt */ -#define SAM BIT(0) -#define DAM BIT(1) -#define SYNCDIM BIT(2) -#define STATIC BIT(3) -#define EDMA_FWID (0x07 << 8) -#define TCCMODE BIT(11) -#define EDMA_TCC(t) ((t) << 12) -#define TCINTEN BIT(20) -#define ITCINTEN BIT(21) -#define TCCHEN BIT(22) -#define ITCCHEN BIT(23) - -/*ch_status paramater of callback function possible values*/ -#define EDMA_DMA_COMPLETE 1 -#define EDMA_DMA_CC_ERROR 2 -#define EDMA_DMA_TC1_ERROR 3 -#define EDMA_DMA_TC2_ERROR 4 - -enum address_mode { - INCR = 0, - FIFO = 1 -}; - -enum fifo_width { - W8BIT = 0, - W16BIT = 1, - W32BIT = 2, - W64BIT = 3, - W128BIT = 4, - W256BIT = 5 -}; +#define EDMA_MAX_CC 2 enum dma_event_q { EVENTQ_0 = 0, @@ -94,68 +21,9 @@ enum dma_event_q { EVENTQ_DEFAULT = -1 }; -enum sync_dimension { - ASYNC = 0, - ABSYNC = 1 -}; - -#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) -#define EDMA_CTLR(i) ((i) >> 16) -#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) - -#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ -#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ -#define EDMA_CONT_PARAMS_ANY 1001 -#define EDMA_CONT_PARAMS_FIXED_EXACT 1002 -#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 - -#define EDMA_MAX_CC 2 - -/* alloc/free DMA channels and their dedicated parameter RAM slots */ -int edma_alloc_channel(int channel, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data, enum dma_event_q); -void edma_free_channel(unsigned channel); - -/* alloc/free parameter RAM slots */ -int edma_alloc_slot(unsigned ctlr, int slot); -void edma_free_slot(unsigned slot); - -/* alloc/free a set of contiguous parameter RAM slots */ -int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count); -int edma_free_cont_slots(unsigned slot, int count); - -/* calls that operate on part of a parameter RAM slot */ -void edma_set_src(unsigned slot, dma_addr_t src_port, - enum address_mode mode, enum fifo_width); -void edma_set_dest(unsigned slot, dma_addr_t dest_port, - enum address_mode mode, enum fifo_width); -dma_addr_t edma_get_position(unsigned slot, bool dst); -void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); -void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); -void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, - u16 bcnt_rld, enum sync_dimension sync_mode); -void edma_link(unsigned from, unsigned to); -void edma_unlink(unsigned from); - -/* calls that operate on an entire parameter RAM slot */ -void edma_write_slot(unsigned slot, const struct edmacc_param *params); -void edma_read_slot(unsigned slot, struct edmacc_param *params); - -/* channel control operations */ -int edma_start(unsigned channel); -void edma_stop(unsigned channel); -void edma_clean_channel(unsigned channel); -void edma_clear_event(unsigned channel); -void edma_pause(unsigned channel); -void edma_resume(unsigned channel); - -void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no); - struct edma_rsv_info { - - const s16 (*rsv_chans)[2]; - const s16 (*rsv_slots)[2]; + const s16 (*rsv_chans)[2]; + const s16 (*rsv_slots)[2]; }; /* platform_data for EDMA driver */ @@ -165,15 +33,13 @@ struct edma_soc_info { * This way, long transfers on the default queue started * by the codec engine will not cause audio defects. */ - enum dma_event_q default_queue; + enum dma_event_q default_queue; /* Resource reservation for other cores */ - struct edma_rsv_info *rsv; + struct edma_rsv_info *rsv; - s8 (*queue_priority_mapping)[2]; - const s16 (*xbar_chans)[2]; + s8 (*queue_priority_mapping)[2]; + const s16 (*xbar_chans)[2]; }; -int edma_trigger_channel(unsigned); - #endif diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h index 0fe2346a9aa2..ddc07de04067 100644 --- a/sound/soc/davinci/davinci-pcm.h +++ b/sound/soc/davinci/davinci-pcm.h @@ -15,6 +15,7 @@ #include <linux/genalloc.h> #include <linux/platform_data/davinci_asp.h> #include <linux/platform_data/edma.h> +#include <linux/edma.h> struct davinci_pcm_dma_params { int channel; /* sync dma channel ID */
include/linux/platform_data/ is not a correct place to keep the API definitions for edma, it is meant to be only for the pdata for the device. Clean up this by moving the API to include/linux/edma.h Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/common/edma.c | 3 +- arch/arm/mach-davinci/devices.c | 1 + arch/arm/mach-davinci/include/mach/da8xx.h | 1 + drivers/dma/edma.c | 2 +- include/linux/edma.h | 153 +++++++++++++++++++++++++++++ include/linux/platform_data/edma.h | 148 ++-------------------------- sound/soc/davinci/davinci-pcm.h | 1 + 7 files changed, 165 insertions(+), 144 deletions(-) create mode 100644 include/linux/edma.h