diff mbox

[v5,1/6] mfd: fsl imx25 Touchscreen ADC driver

Message ID 1422108103-15052-2-git-send-email-mpa@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Markus Pargmann Jan. 24, 2015, 2:01 p.m. UTC
This is the core driver for imx25 touchscreen/adc driver. The module
has one shared ADC and two different conversion queues which use the
ADC. The two queues are identical. Both can be used for general purpose
ADC but one is meant to be used for touchscreens.

This driver is the core which manages the central components and
registers of the TSC/ADC unit. It manages the IRQs and forwards them to
the correct components.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
---

Notes:
    Changes in v5:
     - Remove ifdef CONFIG_OF as this driver is only for DT usage
     - Remove module owner
     - Add Kconfig dependencies ARCH_MX25 and OF
    
    @Jonathan Cameron:
    I left your acked-by on the patch as these were small changes. If it should be
    removed, please say so. Thanks

 drivers/mfd/Kconfig             |  10 +++
 drivers/mfd/Makefile            |   2 +
 drivers/mfd/fsl-imx25-tsadc.c   | 167 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++++++++
 4 files changed, 319 insertions(+)
 create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
 create mode 100644 include/linux/mfd/imx25-tsadc.h

Comments

Lee Jones Feb. 16, 2015, 1:38 p.m. UTC | #1
On Sat, 24 Jan 2015, Markus Pargmann wrote:

> This is the core driver for imx25 touchscreen/adc driver. The module
> has one shared ADC and two different conversion queues which use the
> ADC. The two queues are identical. Both can be used for general purpose
> ADC but one is meant to be used for touchscreens.
> 
> This driver is the core which manages the central components and
> registers of the TSC/ADC unit. It manages the IRQs and forwards them to
> the correct components.
> 
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
> 
> Notes:
>     Changes in v5:
>      - Remove ifdef CONFIG_OF as this driver is only for DT usage
>      - Remove module owner
>      - Add Kconfig dependencies ARCH_MX25 and OF
>     
>     @Jonathan Cameron:
>     I left your acked-by on the patch as these were small changes. If it should be
>     removed, please say so. Thanks
> 
>  drivers/mfd/Kconfig             |  10 +++
>  drivers/mfd/Makefile            |   2 +
>  drivers/mfd/fsl-imx25-tsadc.c   | 167 ++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++++++++
>  4 files changed, 319 insertions(+)
>  create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
>  create mode 100644 include/linux/mfd/imx25-tsadc.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2e6b7311fabc..44fc15598a6a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -232,6 +232,16 @@ config MFD_MC13XXX_I2C
>  	help
>  	  Select this if your MC13xxx is connected via an I2C bus.
>  
> +config MFD_MX25_TSADC
> +	tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
> +	select REGMAP_MMIO
> +	depends on SOC_IMX25
> +	depends on OF
> +	help
> +	  Enable support for the integrated Touchscreen and ADC unit of the
> +	  i.MX25 processors. They consist of a conversion queue for general
> +	  purpose ADC and a queue for Touchscreens.
> +
>  config MFD_HI6421_PMIC
>  	tristate "HiSilicon Hi6421 PMU/Codec IC"
>  	depends on OF
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 53467e211381..3feeb29f5938 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -78,6 +78,8 @@ obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
>  obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
>  obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
>  
> +obj-$(CONFIG_MFD_MX25_TSADC)	+= fsl-imx25-tsadc.o
> +
>  obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
>  obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
>  obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
> diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c
> new file mode 100644
> index 000000000000..8e4013d57500
> --- /dev/null
> +++ b/drivers/mfd/fsl-imx25-tsadc.c
> @@ -0,0 +1,167 @@
> +/*
> + * Copyright 2014 Markus Pargmann, Pengutronix <mpa@pengutronix.de>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdesc.h>
> +#include <linux/irqdomain.h>
> +#include <linux/irq.h>
> +#include <linux/mfd/imx25-tsadc.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>

[...]

> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
> +				struct mx25_tsadc *tsadc)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	int irq;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {

What if 0 is returned?

> +		dev_err(dev, "Failed to get irq\n");
> +		return irq;
> +	}
> +
> +	tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
> +					      tsadc);
> +	if (!tsadc->domain) {
> +		dev_err(dev, "Failed to add irq domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
> +	irq_set_handler_data(irq, tsadc);
> +
> +	return 0;
> +}

> diff --git a/include/linux/mfd/imx25-tsadc.h b/include/linux/mfd/imx25-tsadc.h
> new file mode 100644
> index 000000000000..8086f18847fe
> --- /dev/null
> +++ b/include/linux/mfd/imx25-tsadc.h
> @@ -0,0 +1,140 @@
> +#ifndef _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_
> +#define _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_

INPUT?
Fabio Estevam Feb. 17, 2015, 6:54 p.m. UTC | #2
On Mon, Feb 16, 2015 at 11:38 AM, Lee Jones <lee.jones@linaro.org> wrote:

>> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
>> +                             struct mx25_tsadc *tsadc)
>> +{
>> +     struct device *dev = &pdev->dev;
>> +     struct device_node *np = dev->of_node;
>> +     int irq;
>> +
>> +     irq = platform_get_irq(pdev, 0);
>> +     if (irq < 0) {
>
> What if 0 is returned?

Then  imx25.dtsi would be passing irq=0 for the ADC, which would be
totally wrong.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Uwe Kleine-König Feb. 17, 2015, 7:14 p.m. UTC | #3
Hello Markus,

On Sat, Jan 24, 2015 at 03:01:38PM +0100, Markus Pargmann wrote:
> +config MFD_MX25_TSADC
> +	tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
> +	select REGMAP_MMIO
> +	depends on SOC_IMX25
Can you make that:

	depends on SOC_IMX25 || COMPILE_TEST

?

> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
Which version of the GPL is your code licensed under?

> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
> +				struct mx25_tsadc *tsadc)
> [...]
> +	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
> +	irq_set_handler_data(irq, tsadc);
Do you need to reverse the order of these two calls to prevent the
handler being called while handler_data is still unset?

Best regards
Uwe
Lee Jones Feb. 18, 2015, 8:01 a.m. UTC | #4
On Tue, 17 Feb 2015, Fabio Estevam wrote:

> On Mon, Feb 16, 2015 at 11:38 AM, Lee Jones <lee.jones@linaro.org> wrote:
> 
> >> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
> >> +                             struct mx25_tsadc *tsadc)
> >> +{
> >> +     struct device *dev = &pdev->dev;
> >> +     struct device_node *np = dev->of_node;
> >> +     int irq;
> >> +
> >> +     irq = platform_get_irq(pdev, 0);
> >> +     if (irq < 0) {
> >
> > What if 0 is returned?
> 
> Then  imx25.dtsi would be passing irq=0 for the ADC, which would be
> totally wrong.

Exactly, so it should be <=.
Fabio Estevam Feb. 18, 2015, 11:57 a.m. UTC | #5
On Wed, Feb 18, 2015 at 6:01 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Tue, 17 Feb 2015, Fabio Estevam wrote:
>
>> On Mon, Feb 16, 2015 at 11:38 AM, Lee Jones <lee.jones@linaro.org> wrote:
>>
>> >> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
>> >> +                             struct mx25_tsadc *tsadc)
>> >> +{
>> >> +     struct device *dev = &pdev->dev;
>> >> +     struct device_node *np = dev->of_node;
>> >> +     int irq;
>> >> +
>> >> +     irq = platform_get_irq(pdev, 0);
>> >> +     if (irq < 0) {
>> >
>> > What if 0 is returned?
>>
>> Then  imx25.dtsi would be passing irq=0 for the ADC, which would be
>> totally wrong.
>
> Exactly, so it should be <=.

imx25.dtsi passes interrupts = <46>; for the touch screen controller,
so the irq number will never be zero.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Lee Jones Feb. 18, 2015, 12:08 p.m. UTC | #6
On Wed, 18 Feb 2015, Fabio Estevam wrote:

> On Wed, Feb 18, 2015 at 6:01 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > On Tue, 17 Feb 2015, Fabio Estevam wrote:
> >
> >> On Mon, Feb 16, 2015 at 11:38 AM, Lee Jones <lee.jones@linaro.org> wrote:
> >>
> >> >> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
> >> >> +                             struct mx25_tsadc *tsadc)
> >> >> +{
> >> >> +     struct device *dev = &pdev->dev;
> >> >> +     struct device_node *np = dev->of_node;
> >> >> +     int irq;
> >> >> +
> >> >> +     irq = platform_get_irq(pdev, 0);
> >> >> +     if (irq < 0) {
> >> >
> >> > What if 0 is returned?
> >>
> >> Then  imx25.dtsi would be passing irq=0 for the ADC, which would be
> >> totally wrong.
> >
> > Exactly, so it should be <=.
> 
> imx25.dtsi passes interrupts = <46>; for the touch screen controller,
> so the irq number will never be zero.

It doesn't matter what happens to be passed at the moment.  The
correct thing to do is enforce correct/full error checking.  Yes <0 is
an error, but so is =0, so encompass it in the checks.
Markus Pargmann Feb. 26, 2015, 3:32 p.m. UTC | #7
On Wed, Feb 18, 2015 at 12:08:44PM +0000, Lee Jones wrote:
> On Wed, 18 Feb 2015, Fabio Estevam wrote:
> 
> > On Wed, Feb 18, 2015 at 6:01 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > > On Tue, 17 Feb 2015, Fabio Estevam wrote:
> > >
> > >> On Mon, Feb 16, 2015 at 11:38 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > >>
> > >> >> +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
> > >> >> +                             struct mx25_tsadc *tsadc)
> > >> >> +{
> > >> >> +     struct device *dev = &pdev->dev;
> > >> >> +     struct device_node *np = dev->of_node;
> > >> >> +     int irq;
> > >> >> +
> > >> >> +     irq = platform_get_irq(pdev, 0);
> > >> >> +     if (irq < 0) {
> > >> >
> > >> > What if 0 is returned?
> > >>
> > >> Then  imx25.dtsi would be passing irq=0 for the ADC, which would be
> > >> totally wrong.
> > >
> > > Exactly, so it should be <=.
> > 
> > imx25.dtsi passes interrupts = <46>; for the touch screen controller,
> > so the irq number will never be zero.
> 
> It doesn't matter what happens to be passed at the moment.  The
> correct thing to do is enforce correct/full error checking.  Yes <0 is
> an error, but so is =0, so encompass it in the checks.

I now changed all irq < 0 checks to irq <= 0 under the assumption that
irq 0 is always an error.

Thanks,

Markus
Markus Pargmann March 2, 2015, 7:12 p.m. UTC | #8
Hi,

On Tue, Feb 17, 2015 at 08:14:38PM +0100, Uwe Kleine-König wrote:
> Hello Markus,
> 
> On Sat, Jan 24, 2015 at 03:01:38PM +0100, Markus Pargmann wrote:
> > +config MFD_MX25_TSADC
> > +	tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
> > +	select REGMAP_MMIO
> > +	depends on SOC_IMX25
> Can you make that:
> 
> 	depends on SOC_IMX25 || COMPILE_TEST
> 
> ?

Yes, changed.

> 
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> Which version of the GPL is your code licensed under?

GPLv2 as described by MODULE_LICENSE. Will change the header
accordingly.

> 
> > +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
> > +				struct mx25_tsadc *tsadc)
> > [...]
> > +	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
> > +	irq_set_handler_data(irq, tsadc);
> Do you need to reverse the order of these two calls to prevent the
> handler being called while handler_data is still unset?

Yes that's probably better although the subdevices which may cause
interrupts here are not populated at this point.

Thanks,

Markus
diff mbox

Patch

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2e6b7311fabc..44fc15598a6a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -232,6 +232,16 @@  config MFD_MC13XXX_I2C
 	help
 	  Select this if your MC13xxx is connected via an I2C bus.
 
+config MFD_MX25_TSADC
+	tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
+	select REGMAP_MMIO
+	depends on SOC_IMX25
+	depends on OF
+	help
+	  Enable support for the integrated Touchscreen and ADC unit of the
+	  i.MX25 processors. They consist of a conversion queue for general
+	  purpose ADC and a queue for Touchscreens.
+
 config MFD_HI6421_PMIC
 	tristate "HiSilicon Hi6421 PMU/Codec IC"
 	depends on OF
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 53467e211381..3feeb29f5938 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -78,6 +78,8 @@  obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
 obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
 obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
 
+obj-$(CONFIG_MFD_MX25_TSADC)	+= fsl-imx25-tsadc.o
+
 obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
 obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
 obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c
new file mode 100644
index 000000000000..8e4013d57500
--- /dev/null
+++ b/drivers/mfd/fsl-imx25-tsadc.c
@@ -0,0 +1,167 @@ 
+/*
+ * Copyright 2014 Markus Pargmann, Pengutronix <mpa@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdesc.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/mfd/imx25-tsadc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct regmap_config mx25_tsadc_regmap_config = {
+	.fast_io = true,
+	.max_register = 8,
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static void mx25_tsadc_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_get_chip(irq);
+	u32 status;
+
+	chained_irq_enter(chip, desc);
+
+	regmap_read(tsadc->regs, MX25_TSC_TGSR, &status);
+
+	if (status & MX25_TGSR_GCQ_INT)
+		generic_handle_irq(irq_find_mapping(tsadc->domain, 1));
+
+	if (status & MX25_TGSR_TCQ_INT)
+		generic_handle_irq(irq_find_mapping(tsadc->domain, 0));
+
+	chained_irq_exit(chip, desc);
+}
+
+static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
+				 irq_hw_number_t hwirq)
+{
+	struct mx25_tsadc *tsadc = d->host_data;
+
+	irq_set_chip_data(irq, tsadc);
+	irq_set_chip_and_handler(irq, &dummy_irq_chip,
+				 handle_level_irq);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+static struct irq_domain_ops mx25_tsadc_domain_ops = {
+	.map = mx25_tsadc_domain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int mx25_tsadc_setup_irq(struct platform_device *pdev,
+				struct mx25_tsadc *tsadc)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "Failed to get irq\n");
+		return irq;
+	}
+
+	tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
+					      tsadc);
+	if (!tsadc->domain) {
+		dev_err(dev, "Failed to add irq domain\n");
+		return -ENOMEM;
+	}
+
+	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
+	irq_set_handler_data(irq, tsadc);
+
+	return 0;
+}
+
+static int mx25_tsadc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct mx25_tsadc *tsadc;
+	struct resource *res;
+	int ret;
+	void __iomem *iomem;
+
+	tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL);
+	if (!tsadc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iomem = devm_ioremap_resource(dev, res);
+	if (IS_ERR(iomem))
+		return PTR_ERR(iomem);
+
+	tsadc->regs = devm_regmap_init_mmio(dev, iomem,
+					    &mx25_tsadc_regmap_config);
+	if (IS_ERR(tsadc->regs)) {
+		dev_err(dev, "Failed to initialize regmap\n");
+		return PTR_ERR(tsadc->regs);
+	}
+
+	tsadc->clk = devm_clk_get(dev, "ipg");
+	if (IS_ERR(tsadc->clk)) {
+		dev_err(dev, "Failed to get ipg clock\n");
+		return PTR_ERR(tsadc->clk);
+	}
+
+	/* Enable clock and reset the component */
+	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
+			   MX25_TGCR_CLK_EN);
+	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
+			   MX25_TGCR_TSC_RST);
+
+	/* Setup powersaving mode, but enable internal reference voltage */
+	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
+			   MX25_TGCR_POWERMODE_SAVE);
+	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
+			   MX25_TGCR_INTREFEN);
+
+	ret = mx25_tsadc_setup_irq(pdev, tsadc);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, tsadc);
+
+	of_platform_populate(np, NULL, NULL, dev);
+
+	return 0;
+}
+
+static const struct of_device_id mx25_tsadc_ids[] = {
+	{ .compatible = "fsl,imx25-tsadc" },
+	{ /* Sentinel */ }
+};
+
+static struct platform_driver mx25_tsadc_driver = {
+	.driver = {
+		.name = "mx25-tsadc",
+		.of_match_table = of_match_ptr(mx25_tsadc_ids),
+	},
+	.probe = mx25_tsadc_probe,
+};
+module_platform_driver(mx25_tsadc_driver);
+
+MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
+MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:mx25-tsadc");
diff --git a/include/linux/mfd/imx25-tsadc.h b/include/linux/mfd/imx25-tsadc.h
new file mode 100644
index 000000000000..8086f18847fe
--- /dev/null
+++ b/include/linux/mfd/imx25-tsadc.h
@@ -0,0 +1,140 @@ 
+#ifndef _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_
+#define _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_
+
+struct regmap;
+struct device;
+struct clk;
+
+struct mx25_tsadc {
+	struct regmap *regs;
+	struct irq_domain *domain;
+	struct clk *clk;
+};
+
+#define MX25_TSC_TGCR			0x00
+#define MX25_TSC_TGSR			0x04
+#define MX25_TSC_TICR			0x08
+
+/* The same register layout for TC and GC queue */
+#define MX25_ADCQ_FIFO			0x00
+#define MX25_ADCQ_CR			0x04
+#define MX25_ADCQ_SR			0x08
+#define MX25_ADCQ_MR			0x0c
+#define MX25_ADCQ_ITEM_7_0		0x20
+#define MX25_ADCQ_ITEM_15_8		0x24
+#define MX25_ADCQ_CFG(n)		(0x40 + ((n) * 0x4))
+
+/* Register values */
+/* Queue Config register */
+#define MX25_ADCQ_MR_MASK		0xffffffff
+
+/* TGCR */
+#define MX25_TGCR_PDBTIME(x)		((x) << 25)
+#define MX25_TGCR_PDBTIME_MASK		MX25_TGCR_PDBTIME(0x7f)
+#define MX25_TGCR_PDBEN			BIT(24)
+#define MX25_TGCR_PDEN			BIT(23)
+#define MX25_TGCR_ADCCLKCFG(x)		((x) << 16)
+#define MX25_TGCR_GET_ADCCLK(x)		(((x) >> 16) & 0x1f)
+#define MX25_TGCR_INTREFEN		BIT(10)
+#define MX25_TGCR_POWERMODE_MASK	(3 << 8)
+#define MX25_TGCR_POWERMODE_SAVE	BIT(8)
+#define MX25_TGCR_POWERMODE_ON		(2 << 8)
+#define MX25_TGCR_STLC			BIT(5)
+#define MX25_TGCR_SLPC			BIT(4)
+#define MX25_TGCR_FUNC_RST		BIT(2)
+#define MX25_TGCR_TSC_RST		BIT(1)
+#define MX25_TGCR_CLK_EN		BIT(0)
+
+/* TGSR */
+#define MX25_TGSR_SLP_INT		BIT(2)
+#define MX25_TGSR_GCQ_INT		BIT(1)
+#define MX25_TGSR_TCQ_INT		BIT(0)
+
+/* ADCQ_ITEM_* */
+#define _MX25_ADCQ_ITEM(item, x)	((x) << ((item) * 4))
+#define MX25_ADCQ_ITEM(item, x)		((item) >= 8 ? \
+		_MX25_ADCQ_ITEM((item) - 8, (x)) : _MX25_ADCQ_ITEM((item), (x)))
+
+/* ADCQ_FIFO (TCQFIFO and GCQFIFO) */
+#define MX25_ADCQ_FIFO_DATA(x)		(((x) >> 4) & 0xfff)
+#define MX25_ADCQ_FIFO_ID(x)		((x) & 0xf)
+
+/* ADCQ_CR (TCQR and GCQR) */
+#define MX25_ADCQ_CR_PDCFG_LEVEL	BIT(19)
+#define MX25_ADCQ_CR_PDMSK		BIT(18)
+#define MX25_ADCQ_CR_FRST		BIT(17)
+#define MX25_ADCQ_CR_QRST		BIT(16)
+#define MX25_ADCQ_CR_RWAIT_MASK		(0xf << 12)
+#define MX25_ADCQ_CR_RWAIT(x)		((x) << 12)
+#define MX25_ADCQ_CR_WMRK_MASK		(0xf << 8)
+#define MX25_ADCQ_CR_WMRK(x)		((x) << 8)
+#define MX25_ADCQ_CR_LITEMID_MASK	(0xf << 4)
+#define MX25_ADCQ_CR_LITEMID(x)		((x) << 4)
+#define MX25_ADCQ_CR_RPT		BIT(3)
+#define MX25_ADCQ_CR_FQS		BIT(2)
+#define MX25_ADCQ_CR_QSM_MASK		0x3
+#define MX25_ADCQ_CR_QSM_PD		0x1
+#define MX25_ADCQ_CR_QSM_FQS		0x2
+#define MX25_ADCQ_CR_QSM_FQS_PD		0x3
+
+/* ADCQ_SR (TCQSR and GCQSR) */
+#define MX25_ADCQ_SR_FDRY		BIT(15)
+#define MX25_ADCQ_SR_FULL		BIT(14)
+#define MX25_ADCQ_SR_EMPT		BIT(13)
+#define MX25_ADCQ_SR_FDN(x)		(((x) >> 8) & 0x1f)
+#define MX25_ADCQ_SR_FRR		BIT(6)
+#define MX25_ADCQ_SR_FUR		BIT(5)
+#define MX25_ADCQ_SR_FOR		BIT(4)
+#define MX25_ADCQ_SR_EOQ		BIT(1)
+#define MX25_ADCQ_SR_PD			BIT(0)
+
+/* ADCQ_MR (TCQMR and GCQMR) */
+#define MX25_ADCQ_MR_FDRY_DMA		BIT(31)
+#define MX25_ADCQ_MR_FER_DMA		BIT(22)
+#define MX25_ADCQ_MR_FUR_DMA		BIT(21)
+#define MX25_ADCQ_MR_FOR_DMA		BIT(20)
+#define MX25_ADCQ_MR_EOQ_DMA		BIT(17)
+#define MX25_ADCQ_MR_PD_DMA		BIT(16)
+#define MX25_ADCQ_MR_FDRY_IRQ		BIT(15)
+#define MX25_ADCQ_MR_FER_IRQ		BIT(6)
+#define MX25_ADCQ_MR_FUR_IRQ		BIT(5)
+#define MX25_ADCQ_MR_FOR_IRQ		BIT(4)
+#define MX25_ADCQ_MR_EOQ_IRQ		BIT(1)
+#define MX25_ADCQ_MR_PD_IRQ		BIT(0)
+
+/* ADCQ_CFG (TICR, TCC0-7,GCC0-7) */
+#define MX25_ADCQ_CFG_SETTLING_TIME(x)	((x) << 24)
+#define MX25_ADCQ_CFG_IGS		BIT(20)
+#define MX25_ADCQ_CFG_NOS_MASK		(0xf << 16)
+#define MX25_ADCQ_CFG_NOS(x)		(((x) - 1) << 16)
+#define MX25_ADCQ_CFG_WIPER		BIT(15)
+#define MX25_ADCQ_CFG_YNLR		BIT(14)
+#define MX25_ADCQ_CFG_YPLL_HIGH	0
+#define MX25_ADCQ_CFG_YPLL_OFF		BIT(12)
+#define MX25_ADCQ_CFG_YPLL_LOW		(3 << 12)
+#define MX25_ADCQ_CFG_XNUR_HIGH	0
+#define MX25_ADCQ_CFG_XNUR_OFF		BIT(10)
+#define MX25_ADCQ_CFG_XNUR_LOW		(3 << 10)
+#define MX25_ADCQ_CFG_XPUL_OFF		BIT(9)
+#define MX25_ADCQ_CFG_XPUL_HIGH	0
+#define MX25_ADCQ_CFG_REFP_YP		0
+#define MX25_ADCQ_CFG_REFP_XP		BIT(7)
+#define MX25_ADCQ_CFG_REFP_EXT		(2 << 7)
+#define MX25_ADCQ_CFG_REFP_INT		(3 << 7)
+#define MX25_ADCQ_CFG_REFP_MASK		(3 << 7)
+#define MX25_ADCQ_CFG_IN_XP		0
+#define MX25_ADCQ_CFG_IN_YP		BIT(4)
+#define MX25_ADCQ_CFG_IN_XN		(2 << 4)
+#define MX25_ADCQ_CFG_IN_YN		(3 << 4)
+#define MX25_ADCQ_CFG_IN_WIPER		(4 << 4)
+#define MX25_ADCQ_CFG_IN_AUX0		(5 << 4)
+#define MX25_ADCQ_CFG_IN_AUX1		(6 << 4)
+#define MX25_ADCQ_CFG_IN_AUX2		(7 << 4)
+#define MX25_ADCQ_CFG_REFN_XN		0
+#define MX25_ADCQ_CFG_REFN_YN		BIT(2)
+#define MX25_ADCQ_CFG_REFN_NGND		(2 << 2)
+#define MX25_ADCQ_CFG_REFN_NGND2	(3 << 2)
+#define MX25_ADCQ_CFG_REFN_MASK		(3 << 2)
+#define MX25_ADCQ_CFG_PENIACK		BIT(1)
+
+#endif  /* _LINUX_INCLUDE_INPUT_IMX25_TSADC_H_ */