@@ -31,6 +31,11 @@
#define TWL4030_BCIMFSTS4 0x10
#define TWL4030_BCICTL1 0x23
#define TWL4030_BB_CFG 0x12
+#define TWL4030_BCIIREF1 0x27
+#define TWL4030_BCIIREF2 0x28
+#define TWL4030_BCIMFKEY 0x11
+#define TWL4030_BCIMFTH8 0x1d
+#define TWL4030_BCIMFTH9 0x1e
#define TWL4030_BCIMFSTS1 0x01
@@ -95,6 +100,11 @@ struct twl4030_bci {
int irq_bci;
int usb_enabled;
+ /* ichg values in uA. If any are 'large', we set CGAIN to
+ * '1' which doubles the range for half the precision.
+ */
+ int ichg_eoc, ichg_lo, ichg_hi, cur;
+
unsigned long event;
};
@@ -211,6 +221,140 @@ static int ua2regval(int ua, bool cgain)
return ret;
}
+static int twl4030_charger_update_current(struct twl4030_bci *bci)
+{
+ int status;
+ unsigned reg, cur_reg;
+ u8 bcictl1, oldreg, fullreg;
+ int cgain = 0;
+ u8 boot_bci;
+
+ /* First, check thresholds and see if cgain is needed */
+ if (bci->ichg_eoc >= 200000)
+ cgain = 1;
+ if (bci->ichg_lo >= 400000)
+ cgain = 1;
+ if (bci->ichg_hi >= 820000)
+ cgain = 1;
+ if (bci->cur > 852000)
+ cgain = 1;
+
+ status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+ if (status < 0)
+ return status;
+ if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci,
+ TWL4030_PM_MASTER_BOOT_BCI) < 0)
+ boot_bci = 0;
+ boot_bci &= 7;
+
+ if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN))
+ /* Need to turn for charging while we change the
+ * CGAIN bit. Leave it off while everything is
+ * updated.
+ */
+ twl4030_clear_set_boot_bci(boot_bci, 0);
+
+ /* For ichg_eoc, reg value must be 100XXXX000, we only
+ * set the XXXX in high nibble.
+ */
+ reg = ua2regval(bci->ichg_eoc, cgain);
+ if (reg > 0x278)
+ reg = 0x278;
+ if (reg < 0x200)
+ reg = 0x200;
+ reg = (reg >> 3) & 0xf;
+ fullreg = reg << 4;
+
+ /* For ichg_lo, reg value must be 10XXXX0000.
+ * XXXX is stored in low nibble */
+ reg = ua2regval(bci->ichg_lo, cgain);
+ if (reg > 0x2F0)
+ reg = 0x2F0;
+ if (reg < 0x200)
+ reg = 0x200;
+ reg = (reg >> 4) & 0xf;
+ fullreg |= reg;
+
+ /* ichg_eoc and ichg_lo live in same register */
+ status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg);
+ if (status < 0)
+ return status;
+ if (oldreg != fullreg) {
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ fullreg, TWL4030_BCIMFTH8);
+ }
+
+ /* ichg_hi threshold must be 1XXXX01100 (I think) */
+ reg = ua2regval(bci->ichg_hi, cgain);
+ if (reg > 0x3E0)
+ reg = 0x3E0;
+ if (reg < 0x200)
+ reg = 0x200;
+ fullreg = (reg >> 5) & 0xF;
+ fullreg <<= 4;
+ status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg);
+ if (status < 0)
+ return status;
+ if ((oldreg & 0xF0) != fullreg) {
+ fullreg |= (oldreg & 0x0F);
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ fullreg, TWL4030_BCIMFTH9);
+ }
+
+ /* And finally, set the current. This is stored in
+ * two registers. */
+ reg = ua2regval(bci->cur, cgain);
+ /* we have only 10 bit */
+ if (reg > 0x3ff)
+ reg = 0x3ff;
+ status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg);
+ if (status < 0)
+ return status;
+ cur_reg = oldreg;
+ status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg);
+ if (status < 0)
+ return status;
+ cur_reg |= oldreg << 8;
+ if (reg != oldreg) {
+ /* disable write protection for one write access for
+ * BCIIREF */
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ (reg & 0x100) ? 3 : 2,
+ TWL4030_BCIIREF2);
+ if (status < 0)
+ return status;
+ /* disable write protection for one write access for
+ * BCIIREF */
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ reg & 0xff,
+ TWL4030_BCIIREF1);
+ }
+ if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) {
+ /* Flip CGAIN and re-enable charging */
+ bcictl1 ^= TWL4030_CGAIN;
+ twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ bcictl1, TWL4030_BCICTL1);
+ twl4030_clear_set_boot_bci(0, boot_bci);
+ }
+ return 0;
+}
+
/*
* Enable/Disable USB Charge functionality.
*/
@@ -219,14 +363,6 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
int ret;
if (enable && !IS_ERR_OR_NULL(bci->transceiver)) {
- /*
- * Until we can find out what current the device can provide,
- * require a module param to enable USB charging.
- */
- if (!allow_usb) {
- dev_warn(bci->dev, "USB charging is disabled.\n");
- return -EACCES;
- }
/* Need to keep phy powered */
if (!bci->usb_enabled) {
@@ -562,6 +698,14 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
if (!pdata)
pdata = twl4030_bci_parse_dt(&pdev->dev);
+ bci->ichg_eoc = 80100; /* Stop charging when current drops to here */
+ bci->ichg_lo = 241000; /* low threshold */
+ bci->ichg_hi = 500000; /* High threshold */
+ if (allow_usb)
+ bci->cur = 500000; /* 500mA */
+ else
+ bci->cur = 100000; /* 100mA */
+
bci->dev = &pdev->dev;
bci->irq_chg = platform_get_irq(pdev, 0);
bci->irq_bci = platform_get_irq(pdev, 1);
@@ -644,6 +788,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
if (ret < 0)
dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
+ twl4030_charger_update_current(bci);
twl4030_charger_enable_ac(true);
if (!IS_ERR_OR_NULL(bci->transceiver))
twl4030_bci_usb_ncb(&bci->usb_nb,
The twl4030 allows control of the incoming current. Part of this control is a 'CGAIN' setting which doubles the range for half the precision. This control affects several different current setting, so all need to be updated at once when CGAIN is changed. With this patch, all of these current setting are managed by the driver, but most are left at their default settings. The current drawn is set to 500mA if the allow_usb module parameter is set, and to 100mA otherwise. More fine control will appear in later patches. Signed-off-by: NeilBrown <neilb@suse.de> --- drivers/power/twl4030_charger.c | 161 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 153 insertions(+), 8 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html