diff mbox

[2/2] ARM: dts: imx6: add support for technexion toucan board

Message ID 1424457195-8796-2-git-send-email-m.grzeschik@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Michael Grzeschik Feb. 20, 2015, 6:33 p.m. UTC 
This patch adds the second user of the edm1 module.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
 arch/arm/boot/dts/Makefile          |   1 +
 arch/arm/boot/dts/imx6dl-toucan.dts | 203 ++++++++++++++++++++++++++++++++++++
 2 files changed, 204 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-toucan.dts

Comments

Shawn Guo March 3, 2015, 1:05 a.m. UTC | #1 
On Fri, Feb 20, 2015 at 07:33:15PM +0100, Michael Grzeschik wrote:
> This patch adds the second user of the edm1 module.
> 
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ---
>  arch/arm/boot/dts/Makefile          |   1 +
>  arch/arm/boot/dts/imx6dl-toucan.dts | 203 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 204 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-toucan.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 91bd5bd..bea96c8 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -234,6 +234,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
>  	imx6dl-tx6dl-comtft.dtb \
>  	imx6dl-tx6u-801x.dtb \
>  	imx6dl-tx6u-811x.dtb \
> +	imx6dl-toucan.dtb \

'o' goes before 'x' in alphabet table.

>  	imx6dl-wandboard.dtb \
>  	imx6dl-wandboard-revb1.dtb \
>  	imx6q-arm2.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-toucan.dts b/arch/arm/boot/dts/imx6dl-toucan.dts
> new file mode 100644
> index 0000000..c801774
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-toucan.dts
> @@ -0,0 +1,203 @@
> +/*
> + * Copyright 2015 Michael Grzeschik <mgr@pengutronix.de>, Pengutronix
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +/dts-v1/;
> +
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-edm1.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "Technexion Toucan";
> +	compatible = "technexion,toucan", "fsl,imx6dl";
> +
> +	memory {
> +		reg = <0x10000000 0x40000000>;
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg_usbotg_vbus: regulator@0 {
> +			compatible = "regulator-fixed";
> +			reg = <7>;

'reg' value should match @unit-address.

> +			regulator-name = "usbotg_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			pinctrl-names = "default";
> +			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +
> +		reg_2p5v: regulator@1 {
> +			compatible = "regulator-fixed";
> +			reg = <0>;
> +			regulator-name = "2P5V";
> +			regulator-min-microvolt = <2500000>;
> +			regulator-max-microvolt = <2500000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_3p3v: regulator@2 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "3P3V";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +	};
> +
> +	sound {
> +		compatible = "fsl,imx6-toucan-sgtl5000",
> +			     "fsl,imx-audio-sgtl5000";
> +		model = "imx6-toucan-sgtl5000";
> +		ssi-controller = <&ssi1>;
> +		audio-codec = <&codec>;
> +		audio-routing =
> +			"MIC_IN", "Mic Jack",
> +			"Mic Jack", "Mic Bias",
> +			"Headphone Jack", "HP_OUT";
> +		mux-int-port = <1>;
> +		mux-ext-port = <3>;
> +	};

Can generic simple-audio-card be used instead?

> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	imx6qdl-toucan {
> +		pinctrl_hog: hoggrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0b0b0
> +				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x0b0b0
> +				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x0b0b0
> +				MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x0b0b0
> +				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x0b0b0
> +				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x0b0b0
> +				MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0b0b0
> +				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x0b0b0
> +				MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x0b0b0
> +				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x0b0b0
> +				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08         0x17059
> +			>;
> +		};
> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
> +	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
> +			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> +	status = "okay";
> +};
> +
> +&audmux {

Please sort these nodes alphabetically in label name.

Shawn

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_audmux>;
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbh1>;
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	vbus-supply = <&reg_usbotg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	dr_mode = "peripheral";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	status = "okay";
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	status = "okay";
> +};
> +
> +&ssi1 {
> +	status = "okay";
> +};
> +
> +&hdmi {
> +	ddc-i2c-bus = <&i2c1>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	codec: sgtl5000@0a {
> +		compatible = "fsl,sgtl5000";
> +		reg = <0x0a>;
> +		clocks = <&clks 201>;
> +		VDDA-supply = <&reg_2p5v>;
> +		VDDIO-supply = <&reg_3p3v>;
> +	};
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	bus-width = <4>;
> +	no-1-8-v;
> +	cd-gpios = <&gpio1 2 0>;
> +	fsl,wp-controller;
> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	bus-width = <4>;
> +	no-1-8-v;
> +	fsl,wp-controller;
> +	status = "okay";
> +};
> -- 
> 2.1.4
>
Michael Grzeschik March 8, 2015, 4 p.m. UTC | #2 
On Tue, Mar 03, 2015 at 09:05:32AM +0800, Shawn Guo wrote:
> On Fri, Feb 20, 2015 at 07:33:15PM +0100, Michael Grzeschik wrote:
> > This patch adds the second user of the edm1 module.
> > 
> > Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > ---
> >  arch/arm/boot/dts/Makefile          |   1 +
> >  arch/arm/boot/dts/imx6dl-toucan.dts | 203 ++++++++++++++++++++++++++++++++++++
> >  2 files changed, 204 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx6dl-toucan.dts
> > 
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 91bd5bd..bea96c8 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -234,6 +234,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
> >  	imx6dl-tx6dl-comtft.dtb \
> >  	imx6dl-tx6u-801x.dtb \
> >  	imx6dl-tx6u-811x.dtb \
> > +	imx6dl-toucan.dtb \
> 
> 'o' goes before 'x' in alphabet table.

Will be fixed in v2.

> 
> >  	imx6dl-wandboard.dtb \
> >  	imx6dl-wandboard-revb1.dtb \
> >  	imx6q-arm2.dtb \
> > diff --git a/arch/arm/boot/dts/imx6dl-toucan.dts b/arch/arm/boot/dts/imx6dl-toucan.dts
> > new file mode 100644
> > index 0000000..c801774
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx6dl-toucan.dts
> > @@ -0,0 +1,203 @@
> > +/*
> > + * Copyright 2015 Michael Grzeschik <mgr@pengutronix.de>, Pengutronix
> > + *
> > + * The code contained herein is licensed under the GNU General Public
> > + * License. You may obtain a copy of the GNU General Public License
> > + * Version 2 or later at the following locations:
> > + *
> > + * http://www.opensource.org/licenses/gpl-license.html
> > + * http://www.gnu.org/copyleft/gpl.html
> > + */
> > +/dts-v1/;
> > +
> > +#include "imx6dl.dtsi"
> > +#include "imx6qdl-edm1.dtsi"
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/ {
> > +	model = "Technexion Toucan";
> > +	compatible = "technexion,toucan", "fsl,imx6dl";
> > +
> > +	memory {
> > +		reg = <0x10000000 0x40000000>;
> > +	};
> > +
> > +	regulators {
> > +		compatible = "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		reg_usbotg_vbus: regulator@0 {
> > +			compatible = "regulator-fixed";
> > +			reg = <7>;
> 
> 'reg' value should match @unit-address.

Will be fixed in v2.

> 
> > +			regulator-name = "usbotg_vbus";
> > +			regulator-min-microvolt = <5000000>;
> > +			regulator-max-microvolt = <5000000>;
> > +			pinctrl-names = "default";
> > +			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> > +			enable-active-high;
> > +		};
> > +
> > +		reg_2p5v: regulator@1 {
> > +			compatible = "regulator-fixed";
> > +			reg = <0>;
> > +			regulator-name = "2P5V";
> > +			regulator-min-microvolt = <2500000>;
> > +			regulator-max-microvolt = <2500000>;
> > +			regulator-always-on;
> > +		};
> > +
> > +		reg_3p3v: regulator@2 {
> > +			compatible = "regulator-fixed";
> > +			reg = <1>;
> > +			regulator-name = "3P3V";
> > +			regulator-min-microvolt = <3300000>;
> > +			regulator-max-microvolt = <3300000>;
> > +			regulator-always-on;
> > +		};
> > +	};
> > +
> > +	sound {
> > +		compatible = "fsl,imx6-toucan-sgtl5000",
> > +			     "fsl,imx-audio-sgtl5000";
> > +		model = "imx6-toucan-sgtl5000";
> > +		ssi-controller = <&ssi1>;
> > +		audio-codec = <&codec>;
> > +		audio-routing =
> > +			"MIC_IN", "Mic Jack",
> > +			"Mic Jack", "Mic Bias",
> > +			"Headphone Jack", "HP_OUT";
> > +		mux-int-port = <1>;
> > +		mux-ext-port = <3>;
> > +	};
> 
> Can generic simple-audio-card be used instead?

I don't know. Is it common to use simple-audio-card for sgtl5000?
The Wandboard is using the same nodes. It probably makes sense to keep
it as it is tested. So I will leave this as is for v2.

> 
> > +};
> > +
> > +&iomuxc {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_hog>;
> > +
> > +	imx6qdl-toucan {
> > +		pinctrl_hog: hoggrp {
> > +			fsl,pins = <
> > +				MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0b0b0
> > +				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x0b0b0
> > +				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x0b0b0
> > +				MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x0b0b0
> > +				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x0b0b0
> > +				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x0b0b0
> > +				MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0b0b0
> > +				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x0b0b0
> > +				MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x0b0b0
> > +				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x0b0b0
> > +				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08         0x17059
> > +			>;
> > +		};
> > +	};
> > +};
> > +
> > +&fec {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_enet>;
> > +	phy-mode = "rgmii";
> > +	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
> > +	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
> > +			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> > +	status = "okay";
> > +};
> > +
> > +&audmux {
> 
> Please sort these nodes alphabetically in label name.

Will change it in v2.


Thanks,
Michael
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd..bea96c8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -234,6 +234,7 @@  dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-tx6dl-comtft.dtb \
 	imx6dl-tx6u-801x.dtb \
 	imx6dl-tx6u-811x.dtb \
+	imx6dl-toucan.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
 	imx6q-arm2.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-toucan.dts b/arch/arm/boot/dts/imx6dl-toucan.dts
new file mode 100644
index 0000000..c801774
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-toucan.dts
@@ -0,0 +1,203 @@ 
+/*
+ * Copyright 2015 Michael Grzeschik <mgr@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-edm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Technexion Toucan";
+	compatible = "technexion,toucan", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usbotg_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "usbotg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			pinctrl-names = "default";
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-toucan-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-toucan-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx6qdl-toucan {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0b0b0
+				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x0b0b0
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x0b0b0
+				MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x0b0b0
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x0b0b0
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x0b0b0
+				MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0b0b0
+				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x0b0b0
+				MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x0b0b0
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x0b0b0
+				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08         0x17059
+			>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	cd-gpios = <&gpio1 2 0>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};