@@ -154,7 +154,7 @@ config ARM_SP805_WATCHDOG
config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
- depends on SOC_AT91RM9200
+ depends on SOC_AT91RM9200 && MFD_SYSCON
help
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.
@@ -17,22 +17,25 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/atmel-st.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/uaccess.h>
#include <linux/of.h>
#include <linux/of_device.h>
-#include <mach/at91_st.h>
#define WDT_DEFAULT_TIME 5 /* seconds */
#define WDT_MAX_TIME 256 /* seconds */
static int wdt_time = WDT_DEFAULT_TIME;
static bool nowayout = WATCHDOG_NOWAYOUT;
+static struct regmap *regmap_st;
module_param(wdt_time, int, 0);
MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
@@ -55,7 +58,7 @@ static unsigned long at91wdt_busy;
*/
static inline void at91_wdt_stop(void)
{
- at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN);
+ regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN);
}
/*
@@ -63,9 +66,9 @@ static inline void at91_wdt_stop(void)
*/
static inline void at91_wdt_start(void)
{
- at91_st_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
+ regmap_write(regmap_st, AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN |
(((65536 * wdt_time) >> 8) & AT91_ST_WDV));
- at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+ regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
}
/*
@@ -73,7 +76,7 @@ static inline void at91_wdt_start(void)
*/
static inline void at91_wdt_reload(void)
{
- at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
+ regmap_write(regmap_st, AT91_ST_CR, AT91_ST_WDRST);
}
/* ......................................................................... */
@@ -203,12 +206,17 @@ static struct miscdevice at91wdt_miscdev = {
static int at91wdt_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
int res;
if (at91wdt_miscdev.parent)
return -EBUSY;
at91wdt_miscdev.parent = &pdev->dev;
+ regmap_st = syscon_node_to_regmap(np);
+ if (!regmap_st)
+ return -ENODEV;
+
res = misc_register(&at91wdt_miscdev);
if (res)
return res;
@@ -255,6 +263,7 @@ static int at91wdt_resume(struct platform_device *pdev)
#endif
static const struct of_device_id at91_wdt_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-st" },
{ .compatible = "atmel,at91rm9200-wdt" },
{ /* sentinel */ }
};
@@ -267,7 +276,7 @@ static struct platform_driver at91wdt_driver = {
.suspend = at91wdt_suspend,
.resume = at91wdt_resume,
.driver = {
- .name = "at91_wdt",
+ .name = "atmel_st_watchdog",
.of_match_table = at91_wdt_dt_ids,
},
};
@@ -296,4 +305,4 @@ module_exit(at91_wdt_exit);
MODULE_AUTHOR("Andrew Victor");
MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:at91_wdt");
+MODULE_ALIAS("platform:atmel_st_watchdog");
Use a syscon regmap to access the system timer registers. Also, rename the driver atmel_st_watchdog to stop conflicting with at91sam9_wdt.c Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- drivers/watchdog/Kconfig | 2 +- drivers/watchdog/at91rm9200_wdt.c | 23 ++++++++++++++++------- 2 files changed, 17 insertions(+), 8 deletions(-)