diff mbox

PCI: mvebu: add suspend/resume support

Message ID 1426604145-12335-1-git-send-email-thomas.petazzoni@free-electrons.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Thomas Petazzoni March 17, 2015, 2:55 p.m. UTC
This commit implements suspend/resume support for the mvebu PCIe host
driver. Without this commit, the system will panic at resume time when
PCIe devices are connected.

Note that we have to use the ->suspend_noirq() and ->resume_noirq()
hooks, because at resume time, the PCI fixups are done at
->resume_noirq() time, so the PCIe controller has to be ready at this
point.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
 drivers/pci/host/pci-mvebu.c | 38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

Comments

Jason Cooper March 17, 2015, 3:15 p.m. UTC | #1
Hey Thomas,

On Tue, Mar 17, 2015 at 03:55:45PM +0100, Thomas Petazzoni wrote:
> This commit implements suspend/resume support for the mvebu PCIe host
> driver. Without this commit, the system will panic at resume time when
> PCIe devices are connected.
> 
> Note that we have to use the ->suspend_noirq() and ->resume_noirq()
> hooks, because at resume time, the PCI fixups are done at
> ->resume_noirq() time, so the PCIe controller has to be ready at this
> point.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>  drivers/pci/host/pci-mvebu.c | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> index 1309cfb..1ab8635 100644
> --- a/drivers/pci/host/pci-mvebu.c
> +++ b/drivers/pci/host/pci-mvebu.c
> @@ -129,6 +129,7 @@ struct mvebu_pcie_port {
>  	size_t memwin_size;
>  	phys_addr_t iowin_base;
>  	size_t iowin_size;
> +	u32 saved_pcie_stat;

nit:  It's already in the pcie port struct, why not just call it saved_state?

Either way,

Acked-by: Jason Cooper <jason@lakedaemon.net>

thx,

Jason.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thomas Petazzoni March 19, 2015, 8:24 a.m. UTC | #2
Dear Jason Cooper,

On Tue, 17 Mar 2015 15:15:01 +0000, Jason Cooper wrote:

> > diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> > index 1309cfb..1ab8635 100644
> > --- a/drivers/pci/host/pci-mvebu.c
> > +++ b/drivers/pci/host/pci-mvebu.c
> > @@ -129,6 +129,7 @@ struct mvebu_pcie_port {
> >  	size_t memwin_size;
> >  	phys_addr_t iowin_base;
> >  	size_t iowin_size;
> > +	u32 saved_pcie_stat;
> 
> nit:  It's already in the pcie port struct, why not just call it saved_state?

Well the "stat" does not mean "state", but refers to the register being
saved in this field. The register is called: PCIE_STAT_OFF. Hence the
name saved_pcie_stat. But I'm fine with changing this to some other
name, I really don't care :)

> Either way,
> 
> Acked-by: Jason Cooper <jason@lakedaemon.net>

Thanks!

Thomas
Bjorn Helgaas March 20, 2015, 11:27 p.m. UTC | #3
On Tue, Mar 17, 2015 at 03:55:45PM +0100, Thomas Petazzoni wrote:
> This commit implements suspend/resume support for the mvebu PCIe host
> driver. Without this commit, the system will panic at resume time when
> PCIe devices are connected.
> 
> Note that we have to use the ->suspend_noirq() and ->resume_noirq()
> hooks, because at resume time, the PCI fixups are done at
> ->resume_noirq() time, so the PCIe controller has to be ready at this
> point.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Applied with Jason's ack to pci/host-mvebu for v4.1, thanks!

> ---
>  drivers/pci/host/pci-mvebu.c | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
> index 1309cfb..1ab8635 100644
> --- a/drivers/pci/host/pci-mvebu.c
> +++ b/drivers/pci/host/pci-mvebu.c
> @@ -129,6 +129,7 @@ struct mvebu_pcie_port {
>  	size_t memwin_size;
>  	phys_addr_t iowin_base;
>  	size_t iowin_size;
> +	u32 saved_pcie_stat;
>  };
>  
>  static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
> @@ -899,6 +900,35 @@ static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
>  		pcie->msi->dev = &pcie->pdev->dev;
>  }
>  
> +static int mvebu_pcie_suspend(struct device *dev)
> +{
> +	struct mvebu_pcie *pcie;
> +	int i;
> +
> +	pcie = dev_get_drvdata(dev);
> +	for (i = 0; i < pcie->nports; i++) {
> +		struct mvebu_pcie_port *port = pcie->ports + i;
> +		port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
> +	}
> +
> +	return 0;
> +}
> +
> +static int mvebu_pcie_resume(struct device *dev)
> +{
> +	struct mvebu_pcie *pcie;
> +	int i;
> +
> +	pcie = dev_get_drvdata(dev);
> +	for (i = 0; i < pcie->nports; i++) {
> +		struct mvebu_pcie_port *port = pcie->ports + i;
> +		mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
> +		mvebu_pcie_setup_hw(port);
> +	}
> +
> +	return 0;
> +}
> +
>  static int mvebu_pcie_probe(struct platform_device *pdev)
>  {
>  	struct mvebu_pcie *pcie;
> @@ -1056,6 +1086,8 @@ static int mvebu_pcie_probe(struct platform_device *pdev)
>  	mvebu_pcie_msi_enable(pcie);
>  	mvebu_pcie_enable(pcie);
>  
> +	platform_set_drvdata(pdev, pcie);
> +
>  	return 0;
>  }
>  
> @@ -1068,12 +1100,18 @@ static const struct of_device_id mvebu_pcie_of_match_table[] = {
>  };
>  MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
>  
> +static struct dev_pm_ops mvebu_pcie_pm_ops = {
> +	.suspend_noirq = mvebu_pcie_suspend,
> +	.resume_noirq = mvebu_pcie_resume,
> +};
> +
>  static struct platform_driver mvebu_pcie_driver = {
>  	.driver = {
>  		.name = "mvebu-pcie",
>  		.of_match_table = mvebu_pcie_of_match_table,
>  		/* driver unloading/unbinding currently not supported */
>  		.suppress_bind_attrs = true,
> +		.pm = &mvebu_pcie_pm_ops,
>  	},
>  	.probe = mvebu_pcie_probe,
>  };
> -- 
> 2.1.0
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 1309cfb..1ab8635 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -129,6 +129,7 @@  struct mvebu_pcie_port {
 	size_t memwin_size;
 	phys_addr_t iowin_base;
 	size_t iowin_size;
+	u32 saved_pcie_stat;
 };
 
 static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg)
@@ -899,6 +900,35 @@  static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie)
 		pcie->msi->dev = &pcie->pdev->dev;
 }
 
+static int mvebu_pcie_suspend(struct device *dev)
+{
+	struct mvebu_pcie *pcie;
+	int i;
+
+	pcie = dev_get_drvdata(dev);
+	for (i = 0; i < pcie->nports; i++) {
+		struct mvebu_pcie_port *port = pcie->ports + i;
+		port->saved_pcie_stat = mvebu_readl(port, PCIE_STAT_OFF);
+	}
+
+	return 0;
+}
+
+static int mvebu_pcie_resume(struct device *dev)
+{
+	struct mvebu_pcie *pcie;
+	int i;
+
+	pcie = dev_get_drvdata(dev);
+	for (i = 0; i < pcie->nports; i++) {
+		struct mvebu_pcie_port *port = pcie->ports + i;
+		mvebu_writel(port, port->saved_pcie_stat, PCIE_STAT_OFF);
+		mvebu_pcie_setup_hw(port);
+	}
+
+	return 0;
+}
+
 static int mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie;
@@ -1056,6 +1086,8 @@  static int mvebu_pcie_probe(struct platform_device *pdev)
 	mvebu_pcie_msi_enable(pcie);
 	mvebu_pcie_enable(pcie);
 
+	platform_set_drvdata(pdev, pcie);
+
 	return 0;
 }
 
@@ -1068,12 +1100,18 @@  static const struct of_device_id mvebu_pcie_of_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, mvebu_pcie_of_match_table);
 
+static struct dev_pm_ops mvebu_pcie_pm_ops = {
+	.suspend_noirq = mvebu_pcie_suspend,
+	.resume_noirq = mvebu_pcie_resume,
+};
+
 static struct platform_driver mvebu_pcie_driver = {
 	.driver = {
 		.name = "mvebu-pcie",
 		.of_match_table = mvebu_pcie_of_match_table,
 		/* driver unloading/unbinding currently not supported */
 		.suppress_bind_attrs = true,
+		.pm = &mvebu_pcie_pm_ops,
 	},
 	.probe = mvebu_pcie_probe,
 };