diff mbox

[13/15] twl4030_charger: add ac/mode to match usb/mode

Message ID 20150224043352.4243.8071.stgit@notabene.brown (mailing list archive)
State New, archived
Headers show

Commit Message

NeilBrown Feb. 24, 2015, 4:33 a.m. UTC 
This allows AC charging to be turned off, much like usb charging.

"continuous" (aka "linear") mode maps to the CVENAC (constant voltage)
feature of the twl4030.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/power/twl4030_charger.c |   40 +++++++++++++++++++++++++++++----------
 1 file changed, 30 insertions(+), 10 deletions(-)



--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Pavel Machek March 2, 2015, 9:13 p.m. UTC | #1 
On Tue 2015-02-24 15:33:53, NeilBrown wrote:
> This allows AC charging to be turned off, much like usb charging.
> 
> "continuous" (aka "linear") mode maps to the CVENAC (constant voltage)
> feature of the twl4030.
> 
> Signed-off-by: NeilBrown <neilb@suse.de>

Acked-by: Pavel Machek <pavel@ucw.cz>

> --- a/drivers/power/twl4030_charger.c
> +++ b/drivers/power/twl4030_charger.c
> @@ -112,7 +112,7 @@ struct twl4030_bci {
>  	int			ichg_eoc, ichg_lo, ichg_hi;
>  	int			usb_cur, ac_cur;
>  	bool			ac_is_active;
> -	int			usb_mode; /* charging mode requested */
> +	int			usb_mode, ac_mode; /* charging mode requested */
>  #define	CHARGE_OFF	0
>  #define	CHARGE_AUTO	1
>  #define	CHARGE_LINEAR	2
> @@ -449,12 +449,18 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
>  /*
>   * Enable/Disable AC Charge funtionality.
>   */
> -static int twl4030_charger_enable_ac(bool enable)
> +static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
>  {
>  	int ret;
>  
> -	if (enable)
> -		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
> +	if (bci->ac_mode == CHARGE_OFF)
> +		enable = false;
> +
> +	if (enable && bci->ac_mode == CHARGE_LINEAR)
> +		ret = twl4030_clear_set_boot_bci(0, (TWL4030_CVENAC |
> +						     TWL4030_BCIAUTOAC));
> +	else if (enable)
> +		ret = twl4030_clear_set_boot_bci(TWL4030_CVENAC, TWL4030_BCIAUTOAC);
>  	else
>  		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
>  
> @@ -688,9 +694,15 @@ twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr,
>  		mode = 2;
>  	else
>  		return -EINVAL;
> -	twl4030_charger_enable_usb(bci, false);
> -	bci->usb_mode = mode;
> -	status = twl4030_charger_enable_usb(bci, true);
> +	if (dev == bci->ac.dev) {
> +		twl4030_charger_enable_ac(bci, false);
> +		bci->ac_mode = mode;
> +		status = twl4030_charger_enable_ac(bci, true);
> +	} else {
> +		twl4030_charger_enable_usb(bci, false);
> +		bci->usb_mode = mode;
> +		status = twl4030_charger_enable_usb(bci, true);
> +	}
>  	return (status == 0) ? n : status;
>  }
>  
> @@ -704,9 +716,13 @@ twl4030_bci_mode_show(struct device *dev,
>  	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
>  	int len = 0;
>  	int i;
> +	int mode = bci->usb_mode;
> +
> +	if (dev == bci->ac.dev)
> +		mode = bci->ac_mode;
>  
>  	for (i = 0; i < ARRAY_SIZE(modes); i++)
> -		if (bci->usb_mode == i)
> +		if (mode == i)
>  			len += snprintf(buf+len, PAGE_SIZE-len,
>  					"[%s] ", modes[i]);
>  		else
> @@ -900,6 +916,7 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
>  	else
>  		bci->usb_cur = 100000;  /* 100mA */
>  	bci->usb_mode = CHARGE_AUTO;
> +	bci->ac_mode = CHARGE_AUTO;
>  
>  	bci->dev = &pdev->dev;
>  	bci->irq_chg = platform_get_irq(pdev, 0);
> @@ -988,10 +1005,12 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
>  		dev_warn(&pdev->dev, "could not create sysfs file\n");
>  	if (device_create_file(bci->usb.dev, &dev_attr_mode))
>  		dev_warn(&pdev->dev, "could not create sysfs file\n");
> +	if (device_create_file(bci->ac.dev, &dev_attr_mode))
> +		dev_warn(&pdev->dev, "could not create sysfs file\n");
>  	if (device_create_file(bci->ac.dev, &dev_attr_max_current))
>  		dev_warn(&pdev->dev, "could not create sysfs file\n");
>  
> -	twl4030_charger_enable_ac(true);
> +	twl4030_charger_enable_ac(bci, true);
>  	if (!IS_ERR_OR_NULL(bci->transceiver))
>  		twl4030_bci_usb_ncb(&bci->usb_nb,
>  				    bci->transceiver->last_event,
> @@ -1014,13 +1033,14 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
>  {
>  	struct twl4030_bci *bci = platform_get_drvdata(pdev);
>  
> -	twl4030_charger_enable_ac(false);
> +	twl4030_charger_enable_ac(bci, false);
>  	twl4030_charger_enable_usb(bci, false);
>  	twl4030_charger_enable_backup(0, 0);
>  
>  	device_remove_file(bci->usb.dev, &dev_attr_max_current);
>  	device_remove_file(bci->ac.dev, &dev_attr_max_current);
>  	device_remove_file(bci->usb.dev, &dev_attr_mode);
> +	device_remove_file(bci->ac.dev, &dev_attr_mode);
>  	/* mask interrupts */
>  	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
>  			 TWL4030_INTERRUPTS_BCIIMR1A);
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
Grazvydas Ignotas March 6, 2015, 9:59 p.m. UTC | #2 
On Tue, Feb 24, 2015 at 6:33 AM, NeilBrown <neilb@suse.de> wrote:
> This allows AC charging to be turned off, much like usb charging.
>
> "continuous" (aka "linear") mode maps to the CVENAC (constant voltage)
> feature of the twl4030.

Are you sure? Before your patches CVENAC was set at all times and and
charger still worked in automatic mode.

>
> Signed-off-by: NeilBrown <neilb@suse.de>
> ---
>  drivers/power/twl4030_charger.c |   40 +++++++++++++++++++++++++++++----------
>  1 file changed, 30 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
> index 6c53f0b601a4..e5a0225ea87e 100644
> --- a/drivers/power/twl4030_charger.c
> +++ b/drivers/power/twl4030_charger.c
> @@ -112,7 +112,7 @@ struct twl4030_bci {
>         int                     ichg_eoc, ichg_lo, ichg_hi;
>         int                     usb_cur, ac_cur;
>         bool                    ac_is_active;
> -       int                     usb_mode; /* charging mode requested */
> +       int                     usb_mode, ac_mode; /* charging mode requested */
>  #define        CHARGE_OFF      0
>  #define        CHARGE_AUTO     1
>  #define        CHARGE_LINEAR   2
> @@ -449,12 +449,18 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
>  /*
>   * Enable/Disable AC Charge funtionality.
>   */
> -static int twl4030_charger_enable_ac(bool enable)
> +static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
>  {
>         int ret;
>
> -       if (enable)
> -               ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
> +       if (bci->ac_mode == CHARGE_OFF)
> +               enable = false;
> +
> +       if (enable && bci->ac_mode == CHARGE_LINEAR)
> +               ret = twl4030_clear_set_boot_bci(0, (TWL4030_CVENAC |
> +                                                    TWL4030_BCIAUTOAC));
> +       else if (enable)
> +               ret = twl4030_clear_set_boot_bci(TWL4030_CVENAC, TWL4030_BCIAUTOAC);
>         else
>                 ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);

CVENAC is required to be set for operation on AC without battery
(which works fine on most pandora boards). After this patch, when
booted without battery,  the board will reset before there is a chance
to set the linear mode by userspace, because this is called on
probe...


GraÅžvydas
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
NeilBrown March 22, 2015, 11:13 p.m. UTC | #3 
On Fri, 6 Mar 2015 23:59:04 +0200 Grazvydas Ignotas <notasas@gmail.com> wrote:

> On Tue, Feb 24, 2015 at 6:33 AM, NeilBrown <neilb@suse.de> wrote:
> > This allows AC charging to be turned off, much like usb charging.
> >
> > "continuous" (aka "linear") mode maps to the CVENAC (constant voltage)
> > feature of the twl4030.
> 
> Are you sure? Before your patches CVENAC was set at all times and and
> charger still worked in automatic mode.
> 
> >
> > Signed-off-by: NeilBrown <neilb@suse.de>
> > ---
> >  drivers/power/twl4030_charger.c |   40 +++++++++++++++++++++++++++++----------
> >  1 file changed, 30 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
> > index 6c53f0b601a4..e5a0225ea87e 100644
> > --- a/drivers/power/twl4030_charger.c
> > +++ b/drivers/power/twl4030_charger.c
> > @@ -112,7 +112,7 @@ struct twl4030_bci {
> >         int                     ichg_eoc, ichg_lo, ichg_hi;
> >         int                     usb_cur, ac_cur;
> >         bool                    ac_is_active;
> > -       int                     usb_mode; /* charging mode requested */
> > +       int                     usb_mode, ac_mode; /* charging mode requested */
> >  #define        CHARGE_OFF      0
> >  #define        CHARGE_AUTO     1
> >  #define        CHARGE_LINEAR   2
> > @@ -449,12 +449,18 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
> >  /*
> >   * Enable/Disable AC Charge funtionality.
> >   */
> > -static int twl4030_charger_enable_ac(bool enable)
> > +static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
> >  {
> >         int ret;
> >
> > -       if (enable)
> > -               ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
> > +       if (bci->ac_mode == CHARGE_OFF)
> > +               enable = false;
> > +
> > +       if (enable && bci->ac_mode == CHARGE_LINEAR)
> > +               ret = twl4030_clear_set_boot_bci(0, (TWL4030_CVENAC |
> > +                                                    TWL4030_BCIAUTOAC));
> > +       else if (enable)
> > +               ret = twl4030_clear_set_boot_bci(TWL4030_CVENAC, TWL4030_BCIAUTOAC);
> >         else
> >                 ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
> 
> CVENAC is required to be set for operation on AC without battery
> (which works fine on most pandora boards). After this patch, when
> booted without battery,  the board will reset before there is a chance
> to set the linear mode by userspace, because this is called on
> probe...
> 

Yes, it looks like I misunderstood CVENAC a bit - thanks.

I've removed 'continuous' mode for AC and no longer clear or set that bit.

Thanks,
NeilBrown
diff mbox

Patch

diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 6c53f0b601a4..e5a0225ea87e 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -112,7 +112,7 @@  struct twl4030_bci {
 	int			ichg_eoc, ichg_lo, ichg_hi;
 	int			usb_cur, ac_cur;
 	bool			ac_is_active;
-	int			usb_mode; /* charging mode requested */
+	int			usb_mode, ac_mode; /* charging mode requested */
 #define	CHARGE_OFF	0
 #define	CHARGE_AUTO	1
 #define	CHARGE_LINEAR	2
@@ -449,12 +449,18 @@  static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 /*
  * Enable/Disable AC Charge funtionality.
  */
-static int twl4030_charger_enable_ac(bool enable)
+static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
 {
 	int ret;
 
-	if (enable)
-		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
+	if (bci->ac_mode == CHARGE_OFF)
+		enable = false;
+
+	if (enable && bci->ac_mode == CHARGE_LINEAR)
+		ret = twl4030_clear_set_boot_bci(0, (TWL4030_CVENAC |
+						     TWL4030_BCIAUTOAC));
+	else if (enable)
+		ret = twl4030_clear_set_boot_bci(TWL4030_CVENAC, TWL4030_BCIAUTOAC);
 	else
 		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
 
@@ -688,9 +694,15 @@  twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr,
 		mode = 2;
 	else
 		return -EINVAL;
-	twl4030_charger_enable_usb(bci, false);
-	bci->usb_mode = mode;
-	status = twl4030_charger_enable_usb(bci, true);
+	if (dev == bci->ac.dev) {
+		twl4030_charger_enable_ac(bci, false);
+		bci->ac_mode = mode;
+		status = twl4030_charger_enable_ac(bci, true);
+	} else {
+		twl4030_charger_enable_usb(bci, false);
+		bci->usb_mode = mode;
+		status = twl4030_charger_enable_usb(bci, true);
+	}
 	return (status == 0) ? n : status;
 }
 
@@ -704,9 +716,13 @@  twl4030_bci_mode_show(struct device *dev,
 	struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
 	int len = 0;
 	int i;
+	int mode = bci->usb_mode;
+
+	if (dev == bci->ac.dev)
+		mode = bci->ac_mode;
 
 	for (i = 0; i < ARRAY_SIZE(modes); i++)
-		if (bci->usb_mode == i)
+		if (mode == i)
 			len += snprintf(buf+len, PAGE_SIZE-len,
 					"[%s] ", modes[i]);
 		else
@@ -900,6 +916,7 @@  static int __init twl4030_bci_probe(struct platform_device *pdev)
 	else
 		bci->usb_cur = 100000;  /* 100mA */
 	bci->usb_mode = CHARGE_AUTO;
+	bci->ac_mode = CHARGE_AUTO;
 
 	bci->dev = &pdev->dev;
 	bci->irq_chg = platform_get_irq(pdev, 0);
@@ -988,10 +1005,12 @@  static int __init twl4030_bci_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 	if (device_create_file(bci->usb.dev, &dev_attr_mode))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
+	if (device_create_file(bci->ac.dev, &dev_attr_mode))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
 	if (device_create_file(bci->ac.dev, &dev_attr_max_current))
 		dev_warn(&pdev->dev, "could not create sysfs file\n");
 
-	twl4030_charger_enable_ac(true);
+	twl4030_charger_enable_ac(bci, true);
 	if (!IS_ERR_OR_NULL(bci->transceiver))
 		twl4030_bci_usb_ncb(&bci->usb_nb,
 				    bci->transceiver->last_event,
@@ -1014,13 +1033,14 @@  static int __exit twl4030_bci_remove(struct platform_device *pdev)
 {
 	struct twl4030_bci *bci = platform_get_drvdata(pdev);
 
-	twl4030_charger_enable_ac(false);
+	twl4030_charger_enable_ac(bci, false);
 	twl4030_charger_enable_usb(bci, false);
 	twl4030_charger_enable_backup(0, 0);
 
 	device_remove_file(bci->usb.dev, &dev_attr_max_current);
 	device_remove_file(bci->ac.dev, &dev_attr_max_current);
 	device_remove_file(bci->usb.dev, &dev_attr_mode);
+	device_remove_file(bci->ac.dev, &dev_attr_mode);
 	/* mask interrupts */
 	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
 			 TWL4030_INTERRUPTS_BCIIMR1A);