| Message ID | 1427928946-31291-2-git-send-email-bjorn.andersson@sonymobile.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
DT Ack please. On Wed, 01 Apr 2015, Bjorn Andersson wrote: > Add the regulator subnodes to the Qualcomm RPM MFD device tree bindings. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 217 +++++++++++++++++++-- > 1 file changed, 205 insertions(+), 12 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 85e3198..8eb1ca9 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -31,16 +31,6 @@ frequencies. > Value type: <string-array> > Definition: must be the three strings "ack", "err" and "wakeup", in order > > -- #address-cells: > - Usage: required > - Value type: <u32> > - Definition: must be 1 > - > -- #size-cells: > - Usage: required > - Value type: <u32> > - Definition: must be 0 > - > - qcom,ipc: > Usage: required > Value type: <prop-encoded-array> > @@ -52,6 +42,188 @@ frequencies. > - u32 representing the ipc bit within the register > > > += SUBNODES > + > +The RPM exposes resources to its subnodes. The below bindings specify the set > +of valid subnodes that can operate on these resources. > + > +== Regulators > + > +Regulator notes are identified by their compatible: > + > +- compatible: > + Usage: required > + Value type: <string> > + Definition: must be one of: > + "qcom,rpm-pm8058-regulators" > + "qcom,rpm-pm8901-regulators" > + "qcom,rpm-pm8921-regulators" > + > +- vdd_l0_l1_lvs-supply: > +- vdd_l2_l11_l12-supply: > +- vdd_l3_l4_l5-supply: > +- vdd_l6_l7-supply: > +- vdd_l8-supply: > +- vdd_l9-supply: > +- vdd_l10-supply: > +- vdd_l13_l16-supply: > +- vdd_l14_l15-supply: > +- vdd_l17_l18-supply: > +- vdd_l19_l20-supply: > +- vdd_l21-supply: > +- vdd_l22-supply: > +- vdd_l23_l24_l25-supply: > +- vdd_ncp-supply: > +- vdd_s0-supply: > +- vdd_s1-supply: > +- vdd_s2-supply: > +- vdd_s3-supply: > +- vdd_s4-supply: > + Usage: optional (pm8058 only) > + Value type: <phandle> > + Definition: reference to regulator supplying the input pin, as > + described in the data sheet > + > +- lvs0_in-supply: > +- lvs1_in-supply: > +- lvs2_in-supply: > +- lvs3_in-supply: > +- mvs_in-supply: > +- vdd_l0-supply: > +- vdd_l1-supply: > +- vdd_l2-supply: > +- vdd_l3-supply: > +- vdd_l4-supply: > +- vdd_l5-supply: > +- vdd_l6-supply: > +- vdd_s0-supply: > +- vdd_s1-supply: > +- vdd_s2-supply: > +- vdd_s3-supply: > +- vdd_s4-supply: > + Usage: optional (pm8901 only) > + Value type: <phandle> > + Definition: reference to regulator supplying the input pin, as > + described in the data sheet > + > +- vdd_l1_l2_l12_l18-supply: > +- vdd_l3_l15_l17-supply: > +- vdd_l4_l14-supply: > +- vdd_l5_l8_l16-supply: > +- vdd_l6_l7-supply: > +- vdd_l9_l11-supply: > +- vdd_l10_l22-supply: > +- vdd_l21_l23_l29-supply: > +- vdd_l24-supply: > +- vdd_l25-supply: > +- vdd_l26-supply: > +- vdd_l27-supply: > +- vdd_l28-supply: > +- vdd_ncp-supply: > +- vdd_s1-supply: > +- vdd_s2-supply: > +- vdd_s4-supply: > +- vdd_s5-supply: > +- vdd_s6-supply: > +- vdd_s7-supply: > +- vdd_s8-supply: > +- vin_5vs-supply: > +- vin_lvs1_3_6-supply: > +- vin_lvs2-supply: > +- vin_lvs4_5_7-supply: > + Usage: optional (pm8921 only) > + Value type: <phandle> > + Definition: reference to regulator supplying the input pin, as > + described in the data sheet > + > +The regulator node houses sub-nodes for each regulator within the device. Each > +sub-node is identified using the node's name, with valid values listed for each > +of the pmics below. > + > +pm8058: > + l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, > + l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, > + lvs0, lvs1, ncp > + > +pm8901: > + l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, > + mvs > + > +pm8921: > + s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, > + l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, > + l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, > + ncp > + > +The content of each sub-node is defined by the standard binding for regulators - > +see regulator.txt - with additional custom properties described below: > + > +=== Switch-mode Power Supply regulator custom properties > + > +- bias-pull-down: > + Usage: optional > + Value type: <empty> > + Definition: enable pull down of the regulator when inactive > + > +- qcom,switch-mode-frequency: > + Usage: required > + Value type: <u32> > + Definition: Frequency (Hz) of the switch-mode power supply; > + must be one of: > + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, > + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, > + 1480000, 1370000, 1280000, 1200000 > + > +- qcom,force-mode: > + Usage: optional (default if no other qcom,force-mode is specified) > + Value type: <u32> > + Defintion: indicates that the regulator should be forced to a > + particular mode, valid values are: > + QCOM_RPM_FORCE_MODE_NONE - do not force any mode > + QCOM_RPM_FORCE_MODE_LPM - force into low power mode > + QCOM_RPM_FORCE_MODE_HPM - force into high power mode > + QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically > + select its own mode based on > + realtime current draw, only for: > + pm8921 smps and ftsmps > + > +- qcom,power-mode-hysteretic: > + Usage: optional > + Value type: <empty> > + Definition: select that the power supply should operate in hysteretic > + mode, instead of the default pwm mode > + > +=== Low-dropout regulator custom properties > + > +- bias-pull-down: > + Usage: optional > + Value type: <empty> > + Definition: enable pull down of the regulator when inactive > + > +- qcom,force-mode: > + Usage: optional > + Value type: <u32> > + Defintion: indicates that the regulator should not be forced to any > + particular mode, valid values are: > + QCOM_RPM_FORCE_MODE_NONE - do not force any mode > + QCOM_RPM_FORCE_MODE_LPM - force into low power mode > + QCOM_RPM_FORCE_MODE_HPM - force into high power mode > + QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass > + mode, i.e. to act as a switch > + and not regulate, only for: > + pm8921 pldo, nldo and nldo1200 > + > +=== Negative Charge Pump custom properties > + > +- qcom,switch-mode-frequency: > + Usage: required > + Value type: <u32> > + Definition: Frequency (Hz) of the swith mode power supply; > + must be one of: > + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, > + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, > + 1480000, 1370000, 1280000, 1200000 > + > = EXAMPLE > > #include <dt-bindings/mfd/qcom-rpm.h> > @@ -64,7 +236,28 @@ frequencies. > interrupts = <0 19 0>, <0 21 0>, <0 22 0>; > interrupt-names = "ack", "err", "wakeup"; > > - #address-cells = <1>; > - #size-cells = <0>; > + regulators { > + compatible = "qcom,rpm-pm8921-regulators"; > + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; > + > + s1 { > + regulator-min-microvolt = <1225000>; > + regulator-max-microvolt = <1225000>; > + > + bias-pull-down; > + > + qcom,switch-mode-frequency = <3200000>; > + }; > + > + pm8921_s4: s4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + qcom,switch-mode-frequency = <1600000>; > + bias-pull-down; > + > + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; > + }; > + }; > }; >
On 04/01/15 15:55, Bjorn Andersson wrote: > @@ -52,6 +42,188 @@ frequencies. > - u32 representing the ipc bit within the register > > > += SUBNODES > + > +The RPM exposes resources to its subnodes. The below bindings specify the set > +of valid subnodes that can operate on these resources. > + > +== Regulators > + > +Regulator notes are identified by their compatible: s/notes/nodes/ Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 85e3198..8eb1ca9 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -31,16 +31,6 @@ frequencies. Value type: <string-array> Definition: must be the three strings "ack", "err" and "wakeup", in order -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - - qcom,ipc: Usage: required Value type: <prop-encoded-array> @@ -52,6 +42,188 @@ frequencies. - u32 representing the ipc bit within the register += SUBNODES + +The RPM exposes resources to its subnodes. The below bindings specify the set +of valid subnodes that can operate on these resources. + +== Regulators + +Regulator notes are identified by their compatible: + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,rpm-pm8058-regulators" + "qcom,rpm-pm8901-regulators" + "qcom,rpm-pm8921-regulators" + +- vdd_l0_l1_lvs-supply: +- vdd_l2_l11_l12-supply: +- vdd_l3_l4_l5-supply: +- vdd_l6_l7-supply: +- vdd_l8-supply: +- vdd_l9-supply: +- vdd_l10-supply: +- vdd_l13_l16-supply: +- vdd_l14_l15-supply: +- vdd_l17_l18-supply: +- vdd_l19_l20-supply: +- vdd_l21-supply: +- vdd_l22-supply: +- vdd_l23_l24_l25-supply: +- vdd_ncp-supply: +- vdd_s0-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: + Usage: optional (pm8058 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- lvs0_in-supply: +- lvs1_in-supply: +- lvs2_in-supply: +- lvs3_in-supply: +- mvs_in-supply: +- vdd_l0-supply: +- vdd_l1-supply: +- vdd_l2-supply: +- vdd_l3-supply: +- vdd_l4-supply: +- vdd_l5-supply: +- vdd_l6-supply: +- vdd_s0-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: + Usage: optional (pm8901 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_l1_l2_l12_l18-supply: +- vdd_l3_l15_l17-supply: +- vdd_l4_l14-supply: +- vdd_l5_l8_l16-supply: +- vdd_l6_l7-supply: +- vdd_l9_l11-supply: +- vdd_l10_l22-supply: +- vdd_l21_l23_l29-supply: +- vdd_l24-supply: +- vdd_l25-supply: +- vdd_l26-supply: +- vdd_l27-supply: +- vdd_l28-supply: +- vdd_ncp-supply: +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: +- vin_5vs-supply: +- vin_lvs1_3_6-supply: +- vin_lvs2-supply: +- vin_lvs4_5_7-supply: + Usage: optional (pm8921 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +The regulator node houses sub-nodes for each regulator within the device. Each +sub-node is identified using the node's name, with valid values listed for each +of the pmics below. + +pm8058: + l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, + l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, + lvs0, lvs1, ncp + +pm8901: + l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, + mvs + +pm8921: + s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, + l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, + ncp + +The content of each sub-node is defined by the standard binding for regulators - +see regulator.txt - with additional custom properties described below: + +=== Switch-mode Power Supply regulator custom properties + +- bias-pull-down: + Usage: optional + Value type: <empty> + Definition: enable pull down of the regulator when inactive + +- qcom,switch-mode-frequency: + Usage: required + Value type: <u32> + Definition: Frequency (Hz) of the switch-mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + +- qcom,force-mode: + Usage: optional (default if no other qcom,force-mode is specified) + Value type: <u32> + Defintion: indicates that the regulator should be forced to a + particular mode, valid values are: + QCOM_RPM_FORCE_MODE_NONE - do not force any mode + QCOM_RPM_FORCE_MODE_LPM - force into low power mode + QCOM_RPM_FORCE_MODE_HPM - force into high power mode + QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically + select its own mode based on + realtime current draw, only for: + pm8921 smps and ftsmps + +- qcom,power-mode-hysteretic: + Usage: optional + Value type: <empty> + Definition: select that the power supply should operate in hysteretic + mode, instead of the default pwm mode + +=== Low-dropout regulator custom properties + +- bias-pull-down: + Usage: optional + Value type: <empty> + Definition: enable pull down of the regulator when inactive + +- qcom,force-mode: + Usage: optional + Value type: <u32> + Defintion: indicates that the regulator should not be forced to any + particular mode, valid values are: + QCOM_RPM_FORCE_MODE_NONE - do not force any mode + QCOM_RPM_FORCE_MODE_LPM - force into low power mode + QCOM_RPM_FORCE_MODE_HPM - force into high power mode + QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass + mode, i.e. to act as a switch + and not regulate, only for: + pm8921 pldo, nldo and nldo1200 + +=== Negative Charge Pump custom properties + +- qcom,switch-mode-frequency: + Usage: required + Value type: <u32> + Definition: Frequency (Hz) of the swith mode power supply; + must be one of: + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, + 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, + 1480000, 1370000, 1280000, 1200000 + = EXAMPLE #include <dt-bindings/mfd/qcom-rpm.h> @@ -64,7 +236,28 @@ frequencies. interrupts = <0 19 0>, <0 21 0>, <0 22 0>; interrupt-names = "ack", "err", "wakeup"; - #address-cells = <1>; - #size-cells = <0>; + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + }; };
Add the regulator subnodes to the Qualcomm RPM MFD device tree bindings. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> --- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 217 +++++++++++++++++++-- 1 file changed, 205 insertions(+), 12 deletions(-)