new file mode 100644
@@ -0,0 +1,117 @@
+/*
+ * Common base for NXP LPC18xx and LPC43xx devices.
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-m3";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+ };
+
+ clocks {
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ /* Temporary hardcode PLL1 until clk drivers are merged */
+ pll1: pll1 {
+ compatible = "fixed-factor-clock";
+ clocks = <&xtal>;
+ #clock-cells = <0>;
+ clock-div = <1>;
+ clock-mult = <12>;
+ };
+ };
+
+ soc {
+ uart0: serial@40081000 {
+ compatible = "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ uart1: serial@40082000 {
+ compatible = "ns16550a";
+ reg = <0x40082000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <25>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ timer0: timer@40084000 {
+ compatible = "nxp,lpc3250-timer";
+ reg = <0x40084000 0x1000>;
+ interrupts = <12>;
+ clocks = <&pll1>;
+ };
+
+ timer1: timer@40085000 {
+ compatible = "nxp,lpc3250-timer";
+ reg = <0x40085000 0x1000>;
+ interrupts = <13>;
+ clocks = <&pll1>;
+ };
+
+ uart2: serial@400c1000 {
+ compatible = "ns16550a";
+ reg = <0x400c1000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <26>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ uart3: serial@400c2000 {
+ compatible = "ns16550a";
+ reg = <0x400c2000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <27>;
+ clocks = <&pll1>;
+ status = "disabled";
+ };
+
+ timer2: timer@400c3000 {
+ compatible = "nxp,lpc3250-timer";
+ reg = <0x400c3000 0x1000>;
+ interrupts = <14>;
+ clocks = <&pll1>;
+ };
+
+ timer3: timer@400c4000 {
+ compatible = "nxp,lpc3250-timer";
+ reg = <0x400c4000 0x1000>;
+ interrupts = <15>;
+ clocks = <&pll1>;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,39 @@
+/*
+ * NXP LPC4357 SoC
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+ compatible = "nxp,lpc4357";
+
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-m4";
+ };
+ };
+
+ soc {
+ sram0: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+ };
+
+ sram1: sram@10080000 {
+ compatible = "mmio-sram";
+ reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+ };
+
+ sram2: sram@20000000 {
+ compatible = "mmio-sram";
+ reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+ };
+ };
+};
NXP LPC18xx/43xx SoCs are very similar devices and should be able to share a common base (lpc18xx.dtsi). Diffences between the devices are put in a dtsi which is specific to that device. Signed-off-by: Joachim Eastwood <manabian@gmail.com> --- arch/arm/boot/dts/lpc18xx.dtsi | 117 +++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/lpc4357.dtsi | 39 ++++++++++++++ 2 files changed, 156 insertions(+) create mode 100644 arch/arm/boot/dts/lpc18xx.dtsi create mode 100644 arch/arm/boot/dts/lpc4357.dtsi