diff mbox

[Query] Direction of adding arm64 support to PCIe designware driver

Message ID 5525D789.2060200@samsung.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Jaehoon Chung April 9, 2015, 1:36 a.m. UTC 
Hi.

On 04/08/2015 07:32 PM, Lorenzo Pieralisi wrote:
> Hi Jisheng,
> 
> On Fri, Apr 03, 2015 at 10:46:21AM +0100, Jisheng Zhang wrote:
>> Hi all,
>>
>> Currently, the pci designware driver still lacks of arm64 support and I noticed
>> that many works are done to achieve this goal.
>>
>> Some patches are merged and some are under discussion. And Per my understanding, 
>> even w/ these patches merged, the driver still doesn't support arm64. Could you
>> please kindly point out the direction to add arm64 support to the PCIe
>> designware driver?
> 
> We should remove pci_sys_data dependency since ARM depends on that.
> I removed it from a couple of places already (eg pci_mmap_page_range).
> 
> Now, pcibios_align_resource and pcibios_msi_controller need patching.
> 
> I have a patch for pcibios_align_resource() (I am waiting for Yijing
> Wang series to get merged so that we can move the align_resource
> function pointer in the host bridge):
> 
> https://lkml.org/lkml/2015/4/3/171
> 
> For MSI, code converted to use CONFIG_PCI_MSI_IRQ_DOMAIN should
> not need pcibios_msi_controller ARM function, but if we still compile
> that function in we do need pci_sys_data on ARM, so we have to have
> it even if it can be dead code in some platforms, I have to vet all
> ARM PCI host controllers to check, but removing it would break MSI
> support.
> 
> Does it help ? MSIs are the most important change required,
> align_resource() pointer can be sorted out easily once Yijing's
> code gets in.

I'm not sure whether my working is right..I used the pcie_port instead of pci_sys_data.

static inline struct *sys_to_pcie(struct pci_sys_data *sys)
-> static inline struct *sys_to_pcie(struct pcie_port *pp)

And add "struct list_head resources" as member of pcie_port.

So i got the below message.

[    2.396822] exynos-pcie 156b0000.pcie: Link up!
[    2.397011] exynos-pcie 156b0000.pcie: PCI host bridge to bus 0000:00
[    2.397021] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    2.397026] pci_bus 0000:00: root bus resource [mem 0x0c011000-0x0ffffffe]
[    2.397033] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.409000] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c200000-0x0c7fffff]
[    2.409009] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
[    2.409509] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c200000-0x0c207fff 64bit]
[    2.410008] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.410027] pci 0000:00:00.0:   bridge window [mem 0x0c200000-0x0c7fffff]

Well, i needs to work more and get the knowledge for pcie. (It's not working completely.)
If somebody is working this, it's great..otherwise I will send the RFC patch to get comment for my code.

If i'm missing something, let me know, plz.

Best Regards,
Jaehoon Chung

> 
> Lorenzo
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jisheng Zhang April 9, 2015, 2:43 a.m. UTC | #1 
Hi Lorenzo, Jaehoon

On Wed, 8 Apr 2015 18:36:09 -0700
Jaehoon Chung <jh80.chung@samsung.com> wrote:

> Hi.
> 
> On 04/08/2015 07:32 PM, Lorenzo Pieralisi wrote:
> > Hi Jisheng,
> > 
> > On Fri, Apr 03, 2015 at 10:46:21AM +0100, Jisheng Zhang wrote:
> >> Hi all,
> >>
> >> Currently, the pci designware driver still lacks of arm64 support and I noticed
> >> that many works are done to achieve this goal.
> >>
> >> Some patches are merged and some are under discussion. And Per my understanding, 
> >> even w/ these patches merged, the driver still doesn't support arm64. Could you
> >> please kindly point out the direction to add arm64 support to the PCIe
> >> designware driver?
> > 
> > We should remove pci_sys_data dependency since ARM depends on that.
> > I removed it from a couple of places already (eg pci_mmap_page_range).
> > 
> > Now, pcibios_align_resource and pcibios_msi_controller need patching.
> > 
> > I have a patch for pcibios_align_resource() (I am waiting for Yijing
> > Wang series to get merged so that we can move the align_resource
> > function pointer in the host bridge):
> > 
> > https://lkml.org/lkml/2015/4/3/171
> > 
> > For MSI, code converted to use CONFIG_PCI_MSI_IRQ_DOMAIN should
> > not need pcibios_msi_controller ARM function, but if we still compile
> > that function in we do need pci_sys_data on ARM, so we have to have
> > it even if it can be dead code in some platforms, I have to vet all
> > ARM PCI host controllers to check, but removing it would break MSI
> > support.
> > 
> > Does it help ? MSIs are the most important change required,
> > align_resource() pointer can be sorted out easily once Yijing's
> > code gets in.

I haven't go to that deeper, and didn't fully understand the pcibios_align_resource()
does.

> 
> I'm not sure whether my working is right..I used the pcie_port instead of pci_sys_data.
> 
> static inline struct *sys_to_pcie(struct pci_sys_data *sys)
> -> static inline struct *sys_to_pcie(struct pcie_port *pp)
> 
> And add "struct list_head resources" as member of pcie_port.
> 
> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
> index 91484a9..1cde583 100644
> --- a/drivers/pci/host/pcie-designware.h
> +++ b/drivers/pci/host/pcie-designware.h
> @@ -53,6 +53,7 @@ struct pcie_port {
>         struct irq_domain       *irq_domain;
>         unsigned long           msi_data;
>         DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> +       struct list_head        resources;
>  };
> 
> and just used pci_scan_root_bus(). (before call this, it's added the offset of resources..)
> So i got the below message.
> 
> [    2.396822] exynos-pcie 156b0000.pcie: Link up!
> [    2.397011] exynos-pcie 156b0000.pcie: PCI host bridge to bus 0000:00
> [    2.397021] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
> [    2.397026] pci_bus 0000:00: root bus resource [mem 0x0c011000-0x0ffffffe]
> [    2.397033] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    2.409000] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c200000-0x0c7fffff]
> [    2.409009] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
> [    2.409509] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c200000-0x0c207fff 64bit]
> [    2.410008] pci 0000:00:00.0: PCI bridge to [bus 01]
> [    2.410027] pci 0000:00:00.0:   bridge window [mem 0x0c200000-0x0c7fffff]
> 
> Well, i needs to work more and get the knowledge for pcie. (It's not working completely.)
> If somebody is working this, it's great..otherwise I will send the RFC patch to get comment for my code.
> 

I'm doing based on Lorenzo's patches to port the designware driver to new DT parsing API

http://lists.infradead.org/pipermail/linux-arm-kernel/2015-January/314008.html

Then modify the driver as drivers/pci/host/pci-versatile.c does to remove pci_sys_data

I'm not sure my direction is correct or not, that's why I sent out this email a few days ago.

And I still dunno are there other changes necessary to remove pci_sys_data from
the desginware driver.

Thanks for all your hints,
Jisheng
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Minghuan Lian April 9, 2015, 2:47 a.m. UTC | #2 
Hi All,

I have submitted the related patches to add support pci designware for arm64 and arm32.
The code has been tested on our boards ls1021 arm32  and ls2085 arm64.

http://patchwork.ozlabs.org/patch/454241/
http://patchwork.ozlabs.org/patch/454246/
http://patchwork.ozlabs.org/patch/454247/

For MSI, 
I would like to add the code like the following:
static void dw_pcie_msi_init(struct dw_pcie_port *pp)
{
	struct device_node *msi_node;

	msi_node = of_parse_phandle(pp->dev->of_node, "msi-parent", 0);
	if (msi_node)
		pp->msi_chip = of_pci_find_msi_chip_by_node(msi_node);
}

MSI driver should be implemented in a separate file added to  drivers/irqchip


> -----Original Message-----
> From: linux-arm-kernel [mailto:linux-arm-kernel-
> bounces@lists.infradead.org] On Behalf Of Jaehoon Chung
> Sent: Thursday, April 09, 2015 9:36 AM
> To: Lorenzo Pieralisi; Jisheng Zhang
> Cc: robh@kernel.org; arnd@arndb.de; linux-pci@vger.kernel.org; Liviu
> Dudau; CPGS; bhelgaas@google.com; linux-arm-kernel@lists.infradead.org
> Subject: Re: [Query] Direction of adding arm64 support to PCIe designware
> driver
> 
> Hi.
> 
> On 04/08/2015 07:32 PM, Lorenzo Pieralisi wrote:
> > Hi Jisheng,
> >
> > On Fri, Apr 03, 2015 at 10:46:21AM +0100, Jisheng Zhang wrote:
> >> Hi all,
> >>
> >> Currently, the pci designware driver still lacks of arm64 support and
> >> I noticed that many works are done to achieve this goal.
> >>
> >> Some patches are merged and some are under discussion. And Per my
> >> understanding, even w/ these patches merged, the driver still doesn't
> >> support arm64. Could you please kindly point out the direction to add
> >> arm64 support to the PCIe designware driver?
> >
> > We should remove pci_sys_data dependency since ARM depends on that.
> > I removed it from a couple of places already (eg pci_mmap_page_range).
> >
> > Now, pcibios_align_resource and pcibios_msi_controller need patching.
> >
> > I have a patch for pcibios_align_resource() (I am waiting for Yijing
> > Wang series to get merged so that we can move the align_resource
> > function pointer in the host bridge):
> >
> > https://lkml.org/lkml/2015/4/3/171
> >
> > For MSI, code converted to use CONFIG_PCI_MSI_IRQ_DOMAIN should
> not
> > need pcibios_msi_controller ARM function, but if we still compile that
> > function in we do need pci_sys_data on ARM, so we have to have it even
> > if it can be dead code in some platforms, I have to vet all ARM PCI
> > host controllers to check, but removing it would break MSI support.
> >
> > Does it help ? MSIs are the most important change required,
> > align_resource() pointer can be sorted out easily once Yijing's code
> > gets in.
> 
> I'm not sure whether my working is right..I used the pcie_port instead of
> pci_sys_data.
> 
> static inline struct *sys_to_pcie(struct pci_sys_data *sys)
> -> static inline struct *sys_to_pcie(struct pcie_port *pp)
> 
> And add "struct list_head resources" as member of pcie_port.
> 
> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-
> designware.h
> index 91484a9..1cde583 100644
> --- a/drivers/pci/host/pcie-designware.h
> +++ b/drivers/pci/host/pcie-designware.h
> @@ -53,6 +53,7 @@ struct pcie_port {
>         struct irq_domain       *irq_domain;
>         unsigned long           msi_data;
>         DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> +       struct list_head        resources;
>  };
> 
> and just used pci_scan_root_bus(). (before call this, it's added the offset of
> resources..) So i got the below message.
> 
> [    2.396822] exynos-pcie 156b0000.pcie: Link up!
> [    2.397011] exynos-pcie 156b0000.pcie: PCI host bridge to bus 0000:00
> [    2.397021] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
> [    2.397026] pci_bus 0000:00: root bus resource [mem 0x0c011000-0x0ffffffe]
> [    2.397033] pci_bus 0000:00: root bus resource [bus 00-ff]
> [    2.409000] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c200000-0x0c7fffff]
> [    2.409009] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff
> 64bit]
> [    2.409509] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c200000-0x0c207fff
> 64bit]
> [    2.410008] pci 0000:00:00.0: PCI bridge to [bus 01]
> [    2.410027] pci 0000:00:00.0:   bridge window [mem 0x0c200000-0x0c7fffff]
> 
> Well, i needs to work more and get the knowledge for pcie. (It's not working
> completely.) If somebody is working this, it's great..otherwise I will send the
> RFC patch to get comment for my code.
> 
> If i'm missing something, let me know, plz.
> 
> Best Regards,
> Jaehoon Chung
> 
> >
> > Lorenzo
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jisheng Zhang April 9, 2015, 3:29 a.m. UTC | #3 
Hi Minghua,

On Wed, 8 Apr 2015 19:47:28 -0700
"Minghuan.Lian@freescale.com" <Minghuan.Lian@freescale.com> wrote:

> Hi All,
> 
> I have submitted the related patches to add support pci designware for arm64 and arm32.
> The code has been tested on our boards ls1021 arm32  and ls2085 arm64.
> 
> http://patchwork.ozlabs.org/patch/454241/
> http://patchwork.ozlabs.org/patch/454246/
> http://patchwork.ozlabs.org/patch/454247/

To be honest, my code is similar as yours, but I modified the dw_pcie_host_init() and
removed pci_sys_data totally in the driver.
so in the end, the dw_pcie_host_init() looks similar as your dw_pcie_port_init().
That's to say all arm32 and arm64 users shares the same init entry: dw_pcie_host_init()

Thanks,
Jisheng


> 
> For MSI, 
> I would like to add the code like the following:
> static void dw_pcie_msi_init(struct dw_pcie_port *pp)
> {
> 	struct device_node *msi_node;
> 
> 	msi_node = of_parse_phandle(pp->dev->of_node, "msi-parent", 0);
> 	if (msi_node)
> 		pp->msi_chip = of_pci_find_msi_chip_by_node(msi_node);
> }
> 
> MSI driver should be implemented in a separate file added to  drivers/irqchip
> 
> 
> > -----Original Message-----
> > From: linux-arm-kernel [mailto:linux-arm-kernel-
> > bounces@lists.infradead.org] On Behalf Of Jaehoon Chung
> > Sent: Thursday, April 09, 2015 9:36 AM
> > To: Lorenzo Pieralisi; Jisheng Zhang
> > Cc: robh@kernel.org; arnd@arndb.de; linux-pci@vger.kernel.org; Liviu
> > Dudau; CPGS; bhelgaas@google.com; linux-arm-kernel@lists.infradead.org
> > Subject: Re: [Query] Direction of adding arm64 support to PCIe designware
> > driver
> > 
> > Hi.
> > 
> > On 04/08/2015 07:32 PM, Lorenzo Pieralisi wrote:
> > > Hi Jisheng,
> > >
> > > On Fri, Apr 03, 2015 at 10:46:21AM +0100, Jisheng Zhang wrote:
> > >> Hi all,
> > >>
> > >> Currently, the pci designware driver still lacks of arm64 support and
> > >> I noticed that many works are done to achieve this goal.
> > >>
> > >> Some patches are merged and some are under discussion. And Per my
> > >> understanding, even w/ these patches merged, the driver still doesn't
> > >> support arm64. Could you please kindly point out the direction to add
> > >> arm64 support to the PCIe designware driver?
> > >
> > > We should remove pci_sys_data dependency since ARM depends on that.
> > > I removed it from a couple of places already (eg pci_mmap_page_range).
> > >
> > > Now, pcibios_align_resource and pcibios_msi_controller need patching.
> > >
> > > I have a patch for pcibios_align_resource() (I am waiting for Yijing
> > > Wang series to get merged so that we can move the align_resource
> > > function pointer in the host bridge):
> > >
> > > https://lkml.org/lkml/2015/4/3/171
> > >
> > > For MSI, code converted to use CONFIG_PCI_MSI_IRQ_DOMAIN should
> > not
> > > need pcibios_msi_controller ARM function, but if we still compile that
> > > function in we do need pci_sys_data on ARM, so we have to have it even
> > > if it can be dead code in some platforms, I have to vet all ARM PCI
> > > host controllers to check, but removing it would break MSI support.
> > >
> > > Does it help ? MSIs are the most important change required,
> > > align_resource() pointer can be sorted out easily once Yijing's code
> > > gets in.
> > 
> > I'm not sure whether my working is right..I used the pcie_port instead of
> > pci_sys_data.
> > 
> > static inline struct *sys_to_pcie(struct pci_sys_data *sys)
> > -> static inline struct *sys_to_pcie(struct pcie_port *pp)
> > 
> > And add "struct list_head resources" as member of pcie_port.
> > 
> > diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-
> > designware.h
> > index 91484a9..1cde583 100644
> > --- a/drivers/pci/host/pcie-designware.h
> > +++ b/drivers/pci/host/pcie-designware.h
> > @@ -53,6 +53,7 @@ struct pcie_port {
> >         struct irq_domain       *irq_domain;
> >         unsigned long           msi_data;
> >         DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> > +       struct list_head        resources;
> >  };
> > 
> > and just used pci_scan_root_bus(). (before call this, it's added the offset of
> > resources..) So i got the below message.
> > 
> > [    2.396822] exynos-pcie 156b0000.pcie: Link up!
> > [    2.397011] exynos-pcie 156b0000.pcie: PCI host bridge to bus 0000:00
> > [    2.397021] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
> > [    2.397026] pci_bus 0000:00: root bus resource [mem 0x0c011000-0x0ffffffe]
> > [    2.397033] pci_bus 0000:00: root bus resource [bus 00-ff]
> > [    2.409000] pci 0000:00:00.0: BAR 8: assigned [mem 0x0c200000-0x0c7fffff]
> > [    2.409009] pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff
> > 64bit]
> > [    2.409509] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c200000-0x0c207fff
> > 64bit]
> > [    2.410008] pci 0000:00:00.0: PCI bridge to [bus 01]
> > [    2.410027] pci 0000:00:00.0:   bridge window [mem 0x0c200000-0x0c7fffff]
> > 
> > Well, i needs to work more and get the knowledge for pcie. (It's not working
> > completely.) If somebody is working this, it's great..otherwise I will send the
> > RFC patch to get comment for my code.
> > 
> > If i'm missing something, let me know, plz.
> > 
> > Best Regards,
> > Jaehoon Chung
> > 
> > >
> > > Lorenzo
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel@lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> > >
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index 91484a9..1cde583 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -53,6 +53,7 @@  struct pcie_port {
        struct irq_domain       *irq_domain;
        unsigned long           msi_data;
        DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
+       struct list_head        resources;
 };

and just used pci_scan_root_bus(). (before call this, it's added the offset of resources..)