diff mbox

[RFC,4/7] ARM: shmobile: r8a7790: Add nodes for pfc SD voltage regulators

Message ID 1430397114.5802.43.camel@xylophone.i.decadent.org.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Ben Hutchings April 30, 2015, 12:31 p.m. UTC
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
---
 arch/arm/boot/dts/r8a7790.dtsi |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Simon Horman May 1, 2015, 12:57 a.m. UTC | #1
Hi Ben,

thanks for your patch-set.

On Thu, Apr 30, 2015 at 01:31:54PM +0100, Ben Hutchings wrote:
> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
> ---
>  arch/arm/boot/dts/r8a7790.dtsi |   21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> index 4bb2f4c17321..23e826153a9d 100644
> --- a/arch/arm/boot/dts/r8a7790.dtsi
> +++ b/arch/arm/boot/dts/r8a7790.dtsi
> @@ -483,6 +483,23 @@
>  	pfc: pfc@e6060000 {
>  		compatible = "renesas,pfc-r8a7790";
>  		reg = <0 0xe6060000 0 0x250>;
> +
> +		vccq_ref_sdhi0: sd-regulator@0 {
> +			compatible = "renesas,pfc-r8a7790-sd-regulator";

I'm a little confused. What is "renesas,pfc-r8a7790-sd-regulator"?
It suspect that it should at least be documented under
Documentation/devicetree/bindings/

> +			status = "disabled";
> +		};
> +		vccq_ref_sdhi1: sd-regulator@1 {
> +			compatible = "renesas,pfc-r8a7790-sd-regulator";
> +			status = "disabled";
> +		};
> +		vccq_ref_sdhi2: sd-regulator@2 {
> +			compatible = "renesas,pfc-r8a7790-sd-regulator";
> +			status = "disabled";
> +		};
> +		vccq_ref_sdhi3: sd-regulator@3 {
> +			compatible = "renesas,pfc-r8a7790-sd-regulator";
> +			status = "disabled";
> +		};
>  	};
>  
>  	sdhi0: sd@ee100000 {
> @@ -490,6 +507,7 @@
>  		reg = <0 0xee100000 0 0x328>;
>  		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
>  		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
> +		vqmmc-ref-supply = <&vccq_ref_sdhi0>;
>  		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
>  		dma-names = "tx", "rx";
>  		status = "disabled";
> @@ -500,6 +518,7 @@
>  		reg = <0 0xee120000 0 0x328>;
>  		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
>  		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
> +		vqmmc-ref-supply = <&vccq_ref_sdhi1>;
>  		dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
>  		dma-names = "tx", "rx";
>  		status = "disabled";
> @@ -510,6 +529,7 @@
>  		reg = <0 0xee140000 0 0x100>;
>  		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
>  		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
> +		vqmmc-ref-supply = <&vccq_ref_sdhi2>;
>  		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
>  		dma-names = "tx", "rx";
>  		status = "disabled";
> @@ -520,6 +540,7 @@
>  		reg = <0 0xee160000 0 0x100>;
>  		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
>  		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
> +		vqmmc-ref-supply = <&vccq_ref_sdhi3>;
>  		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
>  		dma-names = "tx", "rx";
>  		status = "disabled";
> -- 
> 1.7.10.4
> 
> 
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ben Hutchings May 6, 2015, 1:18 a.m. UTC | #2
On Fri, 2015-05-01 at 09:57 +0900, Simon Horman wrote:
> Hi Ben,
> 
> thanks for your patch-set.
> 
> On Thu, Apr 30, 2015 at 01:31:54PM +0100, Ben Hutchings wrote:
> > Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
> > ---
> >  arch/arm/boot/dts/r8a7790.dtsi |   21 +++++++++++++++++++++
> >  1 file changed, 21 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> > index 4bb2f4c17321..23e826153a9d 100644
> > --- a/arch/arm/boot/dts/r8a7790.dtsi
> > +++ b/arch/arm/boot/dts/r8a7790.dtsi
> > @@ -483,6 +483,23 @@
> >  	pfc: pfc@e6060000 {
> >  		compatible = "renesas,pfc-r8a7790";
> >  		reg = <0 0xe6060000 0 0x250>;
> > +
> > +		vccq_ref_sdhi0: sd-regulator@0 {
> > +			compatible = "renesas,pfc-r8a7790-sd-regulator";
> 
> I'm a little confused. What is "renesas,pfc-r8a7790-sd-regulator"?
> It suspect that it should at least be documented under
> Documentation/devicetree/bindings/
[...]

It will be if it's agreed that this is the way to represent the voltage
switch in the pfc.  The sh-pfc driver is changed in patch 3/7 to look
for sd-regulator@{0..3} nodes in an r8a7790 DT.  The nodes carry only
their address and status.  The compatible value is currently ignored.

Ben.


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Simon Horman May 7, 2015, 4:33 a.m. UTC | #3
On Wed, May 06, 2015 at 02:18:02AM +0100, Ben Hutchings wrote:
> On Fri, 2015-05-01 at 09:57 +0900, Simon Horman wrote:
> > Hi Ben,
> > 
> > thanks for your patch-set.
> > 
> > On Thu, Apr 30, 2015 at 01:31:54PM +0100, Ben Hutchings wrote:
> > > Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
> > > ---
> > >  arch/arm/boot/dts/r8a7790.dtsi |   21 +++++++++++++++++++++
> > >  1 file changed, 21 insertions(+)
> > > 
> > > diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
> > > index 4bb2f4c17321..23e826153a9d 100644
> > > --- a/arch/arm/boot/dts/r8a7790.dtsi
> > > +++ b/arch/arm/boot/dts/r8a7790.dtsi
> > > @@ -483,6 +483,23 @@
> > >  	pfc: pfc@e6060000 {
> > >  		compatible = "renesas,pfc-r8a7790";
> > >  		reg = <0 0xe6060000 0 0x250>;
> > > +
> > > +		vccq_ref_sdhi0: sd-regulator@0 {
> > > +			compatible = "renesas,pfc-r8a7790-sd-regulator";
> > 
> > I'm a little confused. What is "renesas,pfc-r8a7790-sd-regulator"?
> > It suspect that it should at least be documented under
> > Documentation/devicetree/bindings/
> [...]
> 
> It will be if it's agreed that this is the way to represent the voltage
> switch in the pfc.  The sh-pfc driver is changed in patch 3/7 to look
> for sd-regulator@{0..3} nodes in an r8a7790 DT.  The nodes carry only
> their address and status.  The compatible value is currently ignored.

Thanks, that makes sense.

As a rule I generally don't apply DT patches that use bindings
that haven't already been accepted. So if this does turn out to
be the way to go then please document it.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4bb2f4c17321..23e826153a9d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -483,6 +483,23 @@ 
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7790";
 		reg = <0 0xe6060000 0 0x250>;
+
+		vccq_ref_sdhi0: sd-regulator@0 {
+			compatible = "renesas,pfc-r8a7790-sd-regulator";
+			status = "disabled";
+		};
+		vccq_ref_sdhi1: sd-regulator@1 {
+			compatible = "renesas,pfc-r8a7790-sd-regulator";
+			status = "disabled";
+		};
+		vccq_ref_sdhi2: sd-regulator@2 {
+			compatible = "renesas,pfc-r8a7790-sd-regulator";
+			status = "disabled";
+		};
+		vccq_ref_sdhi3: sd-regulator@3 {
+			compatible = "renesas,pfc-r8a7790-sd-regulator";
+			status = "disabled";
+		};
 	};
 
 	sdhi0: sd@ee100000 {
@@ -490,6 +507,7 @@ 
 		reg = <0 0xee100000 0 0x328>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
+		vqmmc-ref-supply = <&vccq_ref_sdhi0>;
 		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
 		dma-names = "tx", "rx";
 		status = "disabled";
@@ -500,6 +518,7 @@ 
 		reg = <0 0xee120000 0 0x328>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
+		vqmmc-ref-supply = <&vccq_ref_sdhi1>;
 		dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
 		dma-names = "tx", "rx";
 		status = "disabled";
@@ -510,6 +529,7 @@ 
 		reg = <0 0xee140000 0 0x100>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
+		vqmmc-ref-supply = <&vccq_ref_sdhi2>;
 		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
 		dma-names = "tx", "rx";
 		status = "disabled";
@@ -520,6 +540,7 @@ 
 		reg = <0 0xee160000 0 0x100>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
+		vqmmc-ref-supply = <&vccq_ref_sdhi3>;
 		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
 		dma-names = "tx", "rx";
 		status = "disabled";