Message ID | 1430853672-6227-3-git-send-email-stripathi@apm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Tejun On Wed, May 6, 2015 at 12:51 AM, Suman Tripathi <stripathi@apm.com> wrote: > > This patch adds the support to handle HOST_IRQ_STAT as edge trigger > latch. > > Signed-off-by: Suman Tripathi <stripathi@apm.com> > --- > drivers/ata/ahci.h | 2 ++ > drivers/ata/libahci.c | 40 ++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 42 insertions(+) > > diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h > index 71262e0..f442960 100644 > --- a/drivers/ata/ahci.h > +++ b/drivers/ata/ahci.h > @@ -238,6 +238,8 @@ enum { > AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ > AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ > AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ > + AHCI_HFLAG_EDGE_IRQ = (1 << 19), /* HOST_IRQ_STAT behaves as > + Edge Triggered */ > > /* ap->flags bits */ > > diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c > index aa89c8e..1add5ba 100644 > --- a/drivers/ata/libahci.c > +++ b/drivers/ata/libahci.c > @@ -1853,6 +1853,43 @@ static u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked) > return handled; > } > > +static irqreturn_t ahci_single_edge_irq_intr(int irq, void *dev_instance) > +{ > + struct ata_host *host = dev_instance; > + struct ahci_host_priv *hpriv; > + unsigned int rc = 0; > + void __iomem *mmio; > + u32 irq_stat, irq_masked; > + > + VPRINTK("ENTER\n"); > + > + hpriv = host->private_data; > + mmio = hpriv->mmio; > + > + /* sigh. 0xffffffff is a valid return from h/w */ > + irq_stat = readl(mmio + HOST_IRQ_STAT); > + if (!irq_stat) > + return IRQ_NONE; > + > + irq_masked = irq_stat & hpriv->port_map; > + > + spin_lock(&host->lock); > + > + /* > + * HOST_IRQ_STAT behaves as edge triggered latch meaning that > + * it should be cleared before all the port events are cleared. > + */ > + writel(irq_stat, mmio + HOST_IRQ_STAT); > + > + rc = ahci_handle_port_intr(host, irq_masked); > + > + spin_unlock(&host->lock); > + > + VPRINTK("EXIT\n"); > + > + return IRQ_RETVAL(rc); > +} > + > static irqreturn_t ahci_single_level_irq_intr(int irq, void *dev_instance) > { > struct ata_host *host = dev_instance; > @@ -2495,6 +2532,9 @@ int ahci_host_activate(struct ata_host *host, int irq, > > if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) > rc = ahci_host_activate_multi_irqs(host, irq, sht); > + else if (hpriv->flags & AHCI_HFLAG_EDGE_IRQ) > + rc = ata_host_activate(host, irq, ahci_single_edge_irq_intr, > + IRQF_SHARED, sht); > else > rc = ata_host_activate(host, irq, ahci_single_level_irq_intr, > IRQF_SHARED, sht); > -- > 1.8.2.1 > Any comments on this version ??
On Wed, May 06, 2015 at 12:51:11AM +0530, Suman Tripathi wrote: > This patch adds the support to handle HOST_IRQ_STAT as edge trigger > latch. > > Signed-off-by: Suman Tripathi <stripathi@apm.com> Applied 1-2 to libata/for-4.2. Thanks.
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 71262e0..f442960 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -238,6 +238,8 @@ enum { AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */ AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ + AHCI_HFLAG_EDGE_IRQ = (1 << 19), /* HOST_IRQ_STAT behaves as + Edge Triggered */ /* ap->flags bits */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index aa89c8e..1add5ba 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1853,6 +1853,43 @@ static u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked) return handled; } +static irqreturn_t ahci_single_edge_irq_intr(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct ahci_host_priv *hpriv; + unsigned int rc = 0; + void __iomem *mmio; + u32 irq_stat, irq_masked; + + VPRINTK("ENTER\n"); + + hpriv = host->private_data; + mmio = hpriv->mmio; + + /* sigh. 0xffffffff is a valid return from h/w */ + irq_stat = readl(mmio + HOST_IRQ_STAT); + if (!irq_stat) + return IRQ_NONE; + + irq_masked = irq_stat & hpriv->port_map; + + spin_lock(&host->lock); + + /* + * HOST_IRQ_STAT behaves as edge triggered latch meaning that + * it should be cleared before all the port events are cleared. + */ + writel(irq_stat, mmio + HOST_IRQ_STAT); + + rc = ahci_handle_port_intr(host, irq_masked); + + spin_unlock(&host->lock); + + VPRINTK("EXIT\n"); + + return IRQ_RETVAL(rc); +} + static irqreturn_t ahci_single_level_irq_intr(int irq, void *dev_instance) { struct ata_host *host = dev_instance; @@ -2495,6 +2532,9 @@ int ahci_host_activate(struct ata_host *host, int irq, if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) rc = ahci_host_activate_multi_irqs(host, irq, sht); + else if (hpriv->flags & AHCI_HFLAG_EDGE_IRQ) + rc = ata_host_activate(host, irq, ahci_single_edge_irq_intr, + IRQF_SHARED, sht); else rc = ata_host_activate(host, irq, ahci_single_level_irq_intr, IRQF_SHARED, sht);
This patch adds the support to handle HOST_IRQ_STAT as edge trigger latch. Signed-off-by: Suman Tripathi <stripathi@apm.com> --- drivers/ata/ahci.h | 2 ++ drivers/ata/libahci.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) -- 1.8.2.1 -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html