| Message ID | 1431333119-13626-1-git-send-email-ivan.ivanov@linaro.org (mailing list archive) |
|---|---|
| State | Deferred |
| Delegated to: | Andy Gross |
| Headers | show |
On 11 May 2015 at 02:31, Ivan T. Ivanov <ivan.ivanov@linaro.org> wrote: > Add initial set of CoreSight components found on Qualcomm's 8x16 chipset. > > Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> > --- > > Changes since v2 [1]: > * Added "1x" to "qcom,coresight-replicator" compatible string, to match what > devicetree bindings documentations says. > > [1] http://www.spinics.net/lists/devicetree/msg77768.html > > arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi | 254 ++++++++++++++++++++++++ > 1 file changed, 254 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi > new file mode 100644 > index 0000000..900f1f4 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi > @@ -0,0 +1,254 @@ > +/* > + * Copyright (c) 2013 - 2015, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +&soc { > + > + tpiu@820000 { > + compatible = "arm,coresight-tpiu", "arm,primecell"; > + reg = <0x820000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + port { > + tpiu_in: endpoint { > + slave-mode; > + remote-endpoint = <&replicator_out1>; > + }; > + }; > + }; > + > + funnel@821000 { > + compatible = "arm,coresight-funnel", "arm,primecell"; > + reg = <0x821000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* > + * Not described input ports: > + * 0 - connected to Resource and Power Manger CPU ETM > + * 1 - not-connected > + * 2 - connected to Modem CPU ETM > + * 3 - not-connected > + * 5 - not-connected > + * 6 - connected trought funnel to Wireless CPU ETM > + * 7 - connected to STM component > + */ > + port@4 { > + reg = <4>; > + funnel0_in4: endpoint { > + slave-mode; > + remote-endpoint = <&funnel1_out>; > + }; > + }; > + port@8 { > + reg = <0>; > + funnel0_out: endpoint { > + remote-endpoint = <&etf_in>; > + }; > + }; > + }; > + }; > + > + replicator@824000 { > + compatible = "qcom,coresight-replicator1x", "arm,primecell"; > + reg = <0x824000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + replicator_out0: endpoint { > + remote-endpoint = <&etr_in>; > + }; > + }; > + port@1 { > + reg = <1>; > + replicator_out1: endpoint { > + remote-endpoint = <&tpiu_in>; > + }; > + }; > + port@2 { > + reg = <0>; > + replicator_in: endpoint { > + slave-mode; > + remote-endpoint = <&etf_out>; > + }; > + }; > + }; > + }; > + > + etf@825000 { > + compatible = "arm,coresight-tmc", "arm,primecell"; > + reg = <0x825000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + etf_out: endpoint { > + slave-mode; > + remote-endpoint = <&funnel0_out>; > + }; > + }; > + port@1 { > + reg = <0>; > + etf_in: endpoint { > + remote-endpoint = <&replicator_in>; > + }; > + }; > + }; > + }; > + > + etr@826000 { > + compatible = "arm,coresight-tmc", "arm,primecell"; > + reg = <0x826000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + port { > + etr_in: endpoint { > + slave-mode; > + remote-endpoint = <&replicator_out0>; > + }; > + }; > + }; > + > + funnel@841000 { /* APSS funnel only 4 inputs are used */ > + compatible = "arm,coresight-funnel", "arm,primecell"; > + reg = <0x841000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + funnel1_in0: endpoint { > + slave-mode; > + remote-endpoint = <&etm0_out>; > + }; > + }; > + port@1 { > + reg = <1>; > + funnel1_in1: endpoint { > + slave-mode; > + remote-endpoint = <&etm1_out>; > + }; > + }; > + port@2 { > + reg = <2>; > + funnel1_in2: endpoint { > + slave-mode; > + remote-endpoint = <&etm2_out>; > + }; > + }; > + port@3 { > + reg = <3>; > + funnel1_in3: endpoint { > + slave-mode; > + remote-endpoint = <&etm3_out>; > + }; > + }; > + port@4 { > + reg = <0>; > + funnel1_out: endpoint { > + remote-endpoint = <&funnel0_in4>; > + }; > + }; > + }; > + }; > + > + etm@85c000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0x85c000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + cpu = <&CPU0>; > + > + port { > + etm0_out: endpoint { > + remote-endpoint = <&funnel1_in0>; > + }; > + }; > + }; > + > + etm@85d000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0x85d000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + cpu = <&CPU1>; > + > + port { > + etm1_out: endpoint { > + remote-endpoint = <&funnel1_in1>; > + }; > + }; > + }; > + > + etm@85e000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0x85e000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + cpu = <&CPU2>; > + > + port { > + etm2_out: endpoint { > + remote-endpoint = <&funnel1_in2>; > + }; > + }; > + }; > + > + etm@85f000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0x85f000 0x1000>; > + > + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; > + clock-names = "apb_pclk", "atclk"; > + > + cpu = <&CPU3>; > + > + port { > + etm3_out: endpoint { > + remote-endpoint = <&funnel1_in3>; > + }; > + }; > + }; > +}; > -- > 1.9.1 > Kumar, I'm happy with this DT specification for Coresight. Since I'm taking the driver it would likely make more sense for this to go through my tree. Could you please have a look and give me your ack? Thanks, Mathieu -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> On May 11, 2015, at 2:21 PM, Mathieu Poirier <mathieu.poirier@linaro.org> wrote: > > On 11 May 2015 at 02:31, Ivan T. Ivanov <ivan.ivanov@linaro.org> wrote: >> Add initial set of CoreSight components found on Qualcomm's 8x16 chipset. >> >> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> >> --- >> >> Changes since v2 [1]: >> * Added "1x" to "qcom,coresight-replicator" compatible string, to match what >> devicetree bindings documentations says. >> >> [1] http://www.spinics.net/lists/devicetree/msg77768.html >> >> arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi | 254 ++++++++++++++++++++++++ >> 1 file changed, 254 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi >> new file mode 100644 >> index 0000000..900f1f4 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi >> @@ -0,0 +1,254 @@ >> +/* >> + * Copyright (c) 2013 - 2015, The Linux Foundation. All rights reserved. >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 and >> + * only version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +&soc { >> + >> + tpiu@820000 { >> + compatible = "arm,coresight-tpiu", "arm,primecell"; >> + reg = <0x820000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + port { >> + tpiu_in: endpoint { >> + slave-mode; >> + remote-endpoint = <&replicator_out1>; >> + }; >> + }; >> + }; >> + >> + funnel@821000 { >> + compatible = "arm,coresight-funnel", "arm,primecell"; >> + reg = <0x821000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + /* >> + * Not described input ports: >> + * 0 - connected to Resource and Power Manger CPU ETM >> + * 1 - not-connected >> + * 2 - connected to Modem CPU ETM >> + * 3 - not-connected >> + * 5 - not-connected >> + * 6 - connected trought funnel to Wireless CPU ETM >> + * 7 - connected to STM component >> + */ >> + port@4 { >> + reg = <4>; >> + funnel0_in4: endpoint { >> + slave-mode; >> + remote-endpoint = <&funnel1_out>; >> + }; >> + }; >> + port@8 { >> + reg = <0>; >> + funnel0_out: endpoint { >> + remote-endpoint = <&etf_in>; >> + }; >> + }; >> + }; >> + }; >> + >> + replicator@824000 { >> + compatible = "qcom,coresight-replicator1x", "arm,primecell"; >> + reg = <0x824000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + replicator_out0: endpoint { >> + remote-endpoint = <&etr_in>; >> + }; >> + }; >> + port@1 { >> + reg = <1>; >> + replicator_out1: endpoint { >> + remote-endpoint = <&tpiu_in>; >> + }; >> + }; >> + port@2 { >> + reg = <0>; >> + replicator_in: endpoint { >> + slave-mode; >> + remote-endpoint = <&etf_out>; >> + }; >> + }; >> + }; >> + }; >> + >> + etf@825000 { >> + compatible = "arm,coresight-tmc", "arm,primecell"; >> + reg = <0x825000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + etf_out: endpoint { >> + slave-mode; >> + remote-endpoint = <&funnel0_out>; >> + }; >> + }; >> + port@1 { >> + reg = <0>; >> + etf_in: endpoint { >> + remote-endpoint = <&replicator_in>; >> + }; >> + }; >> + }; >> + }; >> + >> + etr@826000 { >> + compatible = "arm,coresight-tmc", "arm,primecell"; >> + reg = <0x826000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + port { >> + etr_in: endpoint { >> + slave-mode; >> + remote-endpoint = <&replicator_out0>; >> + }; >> + }; >> + }; >> + >> + funnel@841000 { /* APSS funnel only 4 inputs are used */ >> + compatible = "arm,coresight-funnel", "arm,primecell"; >> + reg = <0x841000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + funnel1_in0: endpoint { >> + slave-mode; >> + remote-endpoint = <&etm0_out>; >> + }; >> + }; >> + port@1 { >> + reg = <1>; >> + funnel1_in1: endpoint { >> + slave-mode; >> + remote-endpoint = <&etm1_out>; >> + }; >> + }; >> + port@2 { >> + reg = <2>; >> + funnel1_in2: endpoint { >> + slave-mode; >> + remote-endpoint = <&etm2_out>; >> + }; >> + }; >> + port@3 { >> + reg = <3>; >> + funnel1_in3: endpoint { >> + slave-mode; >> + remote-endpoint = <&etm3_out>; >> + }; >> + }; >> + port@4 { >> + reg = <0>; >> + funnel1_out: endpoint { >> + remote-endpoint = <&funnel0_in4>; >> + }; >> + }; >> + }; >> + }; >> + >> + etm@85c000 { >> + compatible = "arm,coresight-etm4x", "arm,primecell"; >> + reg = <0x85c000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + cpu = <&CPU0>; >> + >> + port { >> + etm0_out: endpoint { >> + remote-endpoint = <&funnel1_in0>; >> + }; >> + }; >> + }; >> + >> + etm@85d000 { >> + compatible = "arm,coresight-etm4x", "arm,primecell"; >> + reg = <0x85d000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + cpu = <&CPU1>; >> + >> + port { >> + etm1_out: endpoint { >> + remote-endpoint = <&funnel1_in1>; >> + }; >> + }; >> + }; >> + >> + etm@85e000 { >> + compatible = "arm,coresight-etm4x", "arm,primecell"; >> + reg = <0x85e000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + cpu = <&CPU2>; >> + >> + port { >> + etm2_out: endpoint { >> + remote-endpoint = <&funnel1_in2>; >> + }; >> + }; >> + }; >> + >> + etm@85f000 { >> + compatible = "arm,coresight-etm4x", "arm,primecell"; >> + reg = <0x85f000 0x1000>; >> + >> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; >> + clock-names = "apb_pclk", "atclk"; >> + >> + cpu = <&CPU3>; >> + >> + port { >> + etm3_out: endpoint { >> + remote-endpoint = <&funnel1_in3>; >> + }; >> + }; >> + }; >> +}; >> -- >> 1.9.1 >> > > Kumar, I'm happy with this DT specification for Coresight. Since I'm > taking the driver it would likely make more sense for this to go > through my tree. Could you please have a look and give me your ack? It looks ok, however I don’t see us including this file anywhere, so that’s my only concern. - k
On Mon, 2015-05-18 at 13:52 -0500, Kumar Gala wrote: > > > > On May 11, 2015, at 2:21 PM, Mathieu Poirier poirier@linaro.org> wrote: > > > > On 11 May 2015 at 02:31, Ivan T. Ivanov ivanov@linaro.org> wrote: > > > Add initial set of CoreSight components found on Qualcomm's 8x16 chipset. > > > > > > Kumar, I'm happy with this DT specification for Coresight. Since I'm > > taking the driver it would likely make more sense for this to go > > through my tree. Could you please have a look and give me your ack? > > It looks ok, however I don’t see us including this file anywhere, so that’s my only concern. > True. The reason is that 'rpmcc' driver is still in testing phase and it is not upstreamed. Once it is ready, I will include this file where is appropriate. Regards, Ivan -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 19 May 2015 at 01:03, Ivan T. Ivanov <ivan.ivanov@linaro.org> wrote: > > On Mon, 2015-05-18 at 13:52 -0500, Kumar Gala wrote: >> > >> > On May 11, 2015, at 2:21 PM, Mathieu Poirier poirier@linaro.org> wrote: >> > >> > On 11 May 2015 at 02:31, Ivan T. Ivanov ivanov@linaro.org> wrote: >> > > Add initial set of CoreSight components found on Qualcomm's 8x16 chipset. >> > > >> > >> > Kumar, I'm happy with this DT specification for Coresight. Since I'm >> > taking the driver it would likely make more sense for this to go >> > through my tree. Could you please have a look and give me your ack? >> >> It looks ok, however I don’t see us including this file anywhere, so that’s my only concern. >> > > True. The reason is that 'rpmcc' driver is still in testing phase > and it is not upstreamed. Once it is ready, I will include this file > where is appropriate. > > Regards, > Ivan Very well - as such I won't take the DT patch right away. Please re-submit when all the components are ready. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2015-05-19 at 07:52 -0600, Mathieu Poirier wrote: > On 19 May 2015 at 01:03, Ivan T. Ivanov ivanov@linaro.org> wrote: > > On Mon, 2015-05-18 at 13:52 -0500, Kumar Gala wrote: > > > > On May 11, 2015, at 2:21 PM, Mathieu Poirier poirier@linaro.org> wrote: > > > > > > > > On 11 May 2015 at 02:31, Ivan T. Ivanov ivanov@linaro.org> wrote: > > > > > Add initial set of CoreSight components found on Qualcomm's 8x16 chipset. > > > > > > > > > > Kumar, I'm happy with this DT specification for Coresight. Since I'm > > > > taking the driver it would likely make more sense for this to go > > > > through my tree. Could you please have a look and give me your ack? > > > > > > It looks ok, however I don’t see us including this file anywhere, so that’s my only concern. > > > > > > > True. The reason is that 'rpmcc' driver is still in testing phase > > and it is not upstreamed. Once it is ready, I will include this file > > where is appropriate. > > > > Regards, > > Ivan > > Very well - as such I won't take the DT patch right away. Please > re-submit when all the components are ready. Eeh, I was hoping to include this file to main msm8916.dtsi, not to resend it, but I'm ?k either way. Regards, Ivan -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi new file mode 100644 index 0000000..900f1f4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi @@ -0,0 +1,254 @@ +/* + * Copyright (c) 2013 - 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&soc { + + tpiu@820000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x820000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + port { + tpiu_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out1>; + }; + }; + }; + + funnel@821000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x821000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* + * Not described input ports: + * 0 - connected to Resource and Power Manger CPU ETM + * 1 - not-connected + * 2 - connected to Modem CPU ETM + * 3 - not-connected + * 5 - not-connected + * 6 - connected trought funnel to Wireless CPU ETM + * 7 - connected to STM component + */ + port@4 { + reg = <4>; + funnel0_in4: endpoint { + slave-mode; + remote-endpoint = <&funnel1_out>; + }; + }; + port@8 { + reg = <0>; + funnel0_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + }; + + replicator@824000 { + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0x824000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + port@2 { + reg = <0>; + replicator_in: endpoint { + slave-mode; + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@825000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x825000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_out: endpoint { + slave-mode; + remote-endpoint = <&funnel0_out>; + }; + }; + port@1 { + reg = <0>; + etf_in: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + }; + + etr@826000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x826000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + port { + etr_in: endpoint { + slave-mode; + remote-endpoint = <&replicator_out0>; + }; + }; + }; + + funnel@841000 { /* APSS funnel only 4 inputs are used */ + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x841000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel1_in0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out>; + }; + }; + port@1 { + reg = <1>; + funnel1_in1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out>; + }; + }; + port@2 { + reg = <2>; + funnel1_in2: endpoint { + slave-mode; + remote-endpoint = <&etm2_out>; + }; + }; + port@3 { + reg = <3>; + funnel1_in3: endpoint { + slave-mode; + remote-endpoint = <&etm3_out>; + }; + }; + port@4 { + reg = <0>; + funnel1_out: endpoint { + remote-endpoint = <&funnel0_in4>; + }; + }; + }; + }; + + etm@85c000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85c000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; + }; + }; + + etm@85d000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85d000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; + }; + }; + + etm@85e000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85e000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; + }; + }; + + etm@85f000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x85f000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; + }; + }; +};
Add initial set of CoreSight components found on Qualcomm's 8x16 chipset. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> --- Changes since v2 [1]: * Added "1x" to "qcom,coresight-replicator" compatible string, to match what devicetree bindings documentations says. [1] http://www.spinics.net/lists/devicetree/msg77768.html arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi | 254 ++++++++++++++++++++++++ 1 file changed, 254 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8916-coresight.dtsi -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html