| Message ID | 1431504274-32084-1-git-send-email-pantelis.antoniou@konsulko.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Pantelis Antoniou <pantelis.antoniou@konsulko.com> [150513 01:05]: > The beaglebone family of boards contain two I2C busses enabled. > The first one with a baseboard identification EEPROM and a > cape I2C bus. This seems safe to apply as the i2c2 pins are listed in the cape specification. These pins could be used for other devices too.. But in that case the cape would not follow the cape standard. Regards, Tony > Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> > --- > arch/arm/boot/dts/am335x-bone-common.dtsi | 66 +++++++++++++++++++++++++++++++ > 1 file changed, 66 insertions(+) > > diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi > index c3255e0..236b7db 100644 > --- a/arch/arm/boot/dts/am335x-bone-common.dtsi > +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi > @@ -81,6 +81,13 @@ > >; > }; > > + i2c2_pins: pinmux_i2c2_pins { > + pinctrl-single,pins = < > + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ > + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ > + >; > + }; > + > uart0_pins: pinmux_uart0_pins { > pinctrl-single,pins = < > 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ > @@ -218,8 +225,67 @@ > reg = <0x24>; > }; > > + baseboard_eeprom: baseboard_eeprom@50 { > + compatible = "at,24c256"; > + reg = <0x50>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + baseboard_data: baseboard_data@0 { > + reg = <0 0x100>; > + }; > + }; > +}; > + > +&i2c2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c2_pins>; > + > + status = "okay"; > + clock-frequency = <100000>; > + > + cape_eeprom0: cape_eeprom0@54 { > + compatible = "at,24c256"; > + reg = <0x54>; > + #address-cells = <1>; > + #size-cells = <1>; > + cape0_data: cape_data@0 { > + reg = <0 0x100>; > + }; > + }; > + > + cape_eeprom1: cape_eeprom1@55 { > + compatible = "at,24c256"; > + reg = <0x55>; > + #address-cells = <1>; > + #size-cells = <1>; > + cape1_data: cape_data@0 { > + reg = <0 0x100>; > + }; > + }; > + > + cape_eeprom2: cape_eeprom2@56 { > + compatible = "at,24c256"; > + reg = <0x56>; > + #address-cells = <1>; > + #size-cells = <1>; > + cape2_data: cape_data@0 { > + reg = <0 0x100>; > + }; > + }; > + > + cape_eeprom3: cape_eeprom3@57 { > + compatible = "at,24c256"; > + reg = <0x57>; > + #address-cells = <1>; > + #size-cells = <1>; > + cape3_data: cape_data@0 { > + reg = <0 0x100>; > + }; > + }; > }; > > + > /include/ "tps65217.dtsi" > > &tps { > -- > 1.7.12 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Tony Lindgren <tony@atomide.com> [150514 08:40]: > * Pantelis Antoniou <pantelis.antoniou@konsulko.com> [150513 01:05]: > > The beaglebone family of boards contain two I2C busses enabled. > > The first one with a baseboard identification EEPROM and a > > cape I2C bus. > > This seems safe to apply as the i2c2 pins are listed in the cape > specification. > > These pins could be used for other devices too.. But in that case > the cape would not follow the cape standard. So applying this one into omap-for-v4.2/dt thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index c3255e0..236b7db 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -81,6 +81,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ @@ -218,8 +225,67 @@ reg = <0x24>; }; + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + cape_eeprom0: cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + cape0_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom1: cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + #address-cells = <1>; + #size-cells = <1>; + cape1_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom2: cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + #address-cells = <1>; + #size-cells = <1>; + cape2_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom3: cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + cape3_data: cape_data@0 { + reg = <0 0x100>; + }; + }; }; + /include/ "tps65217.dtsi" &tps {
The beaglebone family of boards contain two I2C busses enabled. The first one with a baseboard identification EEPROM and a cape I2C bus. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> --- arch/arm/boot/dts/am335x-bone-common.dtsi | 66 +++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+)