diff mbox

[v6,03/12] drm/exynos: atomic phase 1: add .mode_set_nofb() callback

Message ID 555EA6AB.6070701@samsung.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Joonyoung Shim May 22, 2015, 3:46 a.m. UTC
On 05/22/2015 05:02 AM, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> 
> The new atomic infrastructure needs the .mode_set_nofb() callback to
> update CRTC timings before setting any plane.
> 
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> ---
>  drivers/gpu/drm/exynos/exynos_drm_crtc.c | 60 +++++---------------------------
>  1 file changed, 9 insertions(+), 51 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> index 61b8cfe..54b74e1 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> @@ -81,59 +81,16 @@ exynos_drm_crtc_mode_fixup(struct drm_crtc *crtc,
>  	return true;
>  }
>  
> -static int
> -exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
> -			  struct drm_display_mode *adjusted_mode, int x, int y,
> -			  struct drm_framebuffer *old_fb)
> -{
> -	struct drm_framebuffer *fb = crtc->primary->fb;
> -	unsigned int crtc_w;
> -	unsigned int crtc_h;
> -	int ret;
> -
> -	/*
> -	 * copy the mode data adjusted by mode_fixup() into crtc->mode
> -	 * so that hardware can be seet to proper mode.
> -	 */
> -	memcpy(&crtc->mode, adjusted_mode, sizeof(*adjusted_mode));

This can cause any problem because exynos drm drivers use crtc->mode
directly as adjusted_mode. It's necessary to consider using
crtc_state->adjusted_mode in exynos drm drivers.

Please refer a patch of Daniel Stone using hwmode instead of mode but it
cannot use for atomic.

http://lists.freedesktop.org/archives/dri-devel/2015-March/079546.html

> -
> -	ret = exynos_check_plane(crtc->primary, fb);
> -	if (ret < 0)
> -		return ret;
> -
> -	crtc_w = fb->width - x;
> -	crtc_h = fb->height - y;
> -	exynos_plane_mode_set(crtc->primary, crtc, fb, 0, 0,
> -			      crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> -
> -	return 0;
> -}
> -
> -static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> -					  struct drm_framebuffer *old_fb)
> +static void
> +exynos_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
>  {
>  	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> -	struct drm_framebuffer *fb = crtc->primary->fb;
> -	unsigned int crtc_w;
> -	unsigned int crtc_h;
> -	int ret;
>  
> -	/* when framebuffer changing is requested, crtc's dpms should be on */
> -	if (exynos_crtc->dpms > DRM_MODE_DPMS_ON) {
> -		DRM_ERROR("failed framebuffer changing request.\n");
> -		return -EPERM;
> -	}
> -
> -	ret = exynos_check_plane(crtc->primary, fb);
> -	if (ret)
> -		return ret;
> -
> -	crtc_w = fb->width - x;
> -	crtc_h = fb->height - y;
> -	exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> -			    crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> +	if (WARN_ON(!crtc->state))
> +		return;
>  
> -	return 0;
> +	if (exynos_crtc->ops->commit)
> +		exynos_crtc->ops->commit(exynos_crtc);

This will be called again by crtc_funcs->commit from
drm_crtc_helper_set_mode. It seems to need to remove the call from
exynos_drm_crtc_commit like below.


>  }
>  
>  static void exynos_drm_crtc_disable(struct drm_crtc *crtc)
> @@ -158,8 +115,9 @@ static struct drm_crtc_helper_funcs exynos_crtc_helper_funcs = {
>  	.prepare	= exynos_drm_crtc_prepare,
>  	.commit		= exynos_drm_crtc_commit,
>  	.mode_fixup	= exynos_drm_crtc_mode_fixup,
> -	.mode_set	= exynos_drm_crtc_mode_set,
> -	.mode_set_base	= exynos_drm_crtc_mode_set_base,
> +	.mode_set	= drm_helper_crtc_mode_set,
> +	.mode_set_nofb	= exynos_drm_crtc_mode_set_nofb,
> +	.mode_set_base	= drm_helper_crtc_mode_set_base,
>  	.disable	= exynos_drm_crtc_disable,
>  };
>  
> 

Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Gustavo Padovan May 22, 2015, 3:33 p.m. UTC | #1
Hi Joonyoung,

2015-05-22 Joonyoung Shim <jy0922.shim@samsung.com>:

> On 05/22/2015 05:02 AM, Gustavo Padovan wrote:
> > From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> > 
> > The new atomic infrastructure needs the .mode_set_nofb() callback to
> > update CRTC timings before setting any plane.
> > 
> > Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> > ---
> >  drivers/gpu/drm/exynos/exynos_drm_crtc.c | 60 +++++---------------------------
> >  1 file changed, 9 insertions(+), 51 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > index 61b8cfe..54b74e1 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > @@ -81,59 +81,16 @@ exynos_drm_crtc_mode_fixup(struct drm_crtc *crtc,
> >  	return true;
> >  }
> >  
> > -static int
> > -exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
> > -			  struct drm_display_mode *adjusted_mode, int x, int y,
> > -			  struct drm_framebuffer *old_fb)
> > -{
> > -	struct drm_framebuffer *fb = crtc->primary->fb;
> > -	unsigned int crtc_w;
> > -	unsigned int crtc_h;
> > -	int ret;
> > -
> > -	/*
> > -	 * copy the mode data adjusted by mode_fixup() into crtc->mode
> > -	 * so that hardware can be seet to proper mode.
> > -	 */
> > -	memcpy(&crtc->mode, adjusted_mode, sizeof(*adjusted_mode));
> 
> This can cause any problem because exynos drm drivers use crtc->mode
> directly as adjusted_mode. It's necessary to consider using
> crtc_state->adjusted_mode in exynos drm drivers.

Yes, we are moving to use adjusted_mode in exynos, see this patch from
Tobias. It makes crtc uses the adjusted_mode instead. So I think it is
okay to remove this memcpy from here.

http://www.spinics.net/lists/linux-samsung-soc/msg44790.html

> 
> Please refer a patch of Daniel Stone using hwmode instead of mode but it
> cannot use for atomic.
> 
> http://lists.freedesktop.org/archives/dri-devel/2015-March/079546.html

> 
> > -
> > -	ret = exynos_check_plane(crtc->primary, fb);
> > -	if (ret < 0)
> > -		return ret;
> > -
> > -	crtc_w = fb->width - x;
> > -	crtc_h = fb->height - y;
> > -	exynos_plane_mode_set(crtc->primary, crtc, fb, 0, 0,
> > -			      crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> > -
> > -	return 0;
> > -}
> > -
> > -static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> > -					  struct drm_framebuffer *old_fb)
> > +static void
> > +exynos_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
> >  {
> >  	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> > -	struct drm_framebuffer *fb = crtc->primary->fb;
> > -	unsigned int crtc_w;
> > -	unsigned int crtc_h;
> > -	int ret;
> >  
> > -	/* when framebuffer changing is requested, crtc's dpms should be on */
> > -	if (exynos_crtc->dpms > DRM_MODE_DPMS_ON) {
> > -		DRM_ERROR("failed framebuffer changing request.\n");
> > -		return -EPERM;
> > -	}
> > -
> > -	ret = exynos_check_plane(crtc->primary, fb);
> > -	if (ret)
> > -		return ret;
> > -
> > -	crtc_w = fb->width - x;
> > -	crtc_h = fb->height - y;
> > -	exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> > -			    crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> > +	if (WARN_ON(!crtc->state))
> > +		return;
> >  
> > -	return 0;
> > +	if (exynos_crtc->ops->commit)
> > +		exynos_crtc->ops->commit(exynos_crtc);
> 
> This will be called again by crtc_funcs->commit from
> drm_crtc_helper_set_mode. It seems to need to remove the call from
> exynos_drm_crtc_commit like below.
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> index 48ccab7..aa981c2 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> @@ -63,9 +63,6 @@ static void exynos_drm_crtc_commit(struct drm_crtc *crtc)
>  
>  	if (exynos_crtc->ops->win_commit)
>  		exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
> -
> -	if (exynos_crtc->ops->commit)
> -		exynos_crtc->ops->commit(exynos_crtc);
>  }

Okay. Removed.

	Gustavo
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Joonyoung Shim May 27, 2015, 8:43 a.m. UTC | #2
On 05/23/2015 12:33 AM, Gustavo Padovan wrote:
> Hi Joonyoung,
> 
> 2015-05-22 Joonyoung Shim <jy0922.shim@samsung.com>:
> 
>> On 05/22/2015 05:02 AM, Gustavo Padovan wrote:
>>> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>>>
>>> The new atomic infrastructure needs the .mode_set_nofb() callback to
>>> update CRTC timings before setting any plane.
>>>
>>> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>>> ---
>>>  drivers/gpu/drm/exynos/exynos_drm_crtc.c | 60 +++++---------------------------
>>>  1 file changed, 9 insertions(+), 51 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
>>> index 61b8cfe..54b74e1 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
>>> @@ -81,59 +81,16 @@ exynos_drm_crtc_mode_fixup(struct drm_crtc *crtc,
>>>  	return true;
>>>  }
>>>  
>>> -static int
>>> -exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
>>> -			  struct drm_display_mode *adjusted_mode, int x, int y,
>>> -			  struct drm_framebuffer *old_fb)
>>> -{
>>> -	struct drm_framebuffer *fb = crtc->primary->fb;
>>> -	unsigned int crtc_w;
>>> -	unsigned int crtc_h;
>>> -	int ret;
>>> -
>>> -	/*
>>> -	 * copy the mode data adjusted by mode_fixup() into crtc->mode
>>> -	 * so that hardware can be seet to proper mode.
>>> -	 */
>>> -	memcpy(&crtc->mode, adjusted_mode, sizeof(*adjusted_mode));
>>
>> This can cause any problem because exynos drm drivers use crtc->mode
>> directly as adjusted_mode. It's necessary to consider using
>> crtc_state->adjusted_mode in exynos drm drivers.
> 
> Yes, we are moving to use adjusted_mode in exynos, see this patch from
> Tobias. It makes crtc uses the adjusted_mode instead. So I think it is
> okay to remove this memcpy from here.
> 
> http://www.spinics.net/lists/linux-samsung-soc/msg44790.html

Yeah, but that is just one, it can be other missing points. It's better
to care all missing points with removing memcpy of adjusted_mode.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
index 48ccab7..aa981c2 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
@@ -63,9 +63,6 @@  static void exynos_drm_crtc_commit(struct drm_crtc *crtc)
 
 	if (exynos_crtc->ops->win_commit)
 		exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
-
-	if (exynos_crtc->ops->commit)
-		exynos_crtc->ops->commit(exynos_crtc);
 }
 
 static bool