| Message ID | 1431940760-23896-3-git-send-email-antoine.tenart@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 18/05/15 10:19, Antoine Tenart wrote: > Following the addition of a Berlin ADC driver, this patch adds the > corresponding bindings documentation. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > Acked-by: Jonathan Cameron <jic23@kernel.org> Applied and pushed out as the togreg branch of iio.git. Thanks, > --- > .../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt > > diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt > new file mode 100644 > index 000000000000..908334c6b07f > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt > @@ -0,0 +1,19 @@ > +* Berlin Analog to Digital Converter (ADC) > + > +The Berlin ADC has 8 channels, with one connected to a temperature sensor. > +It is part of the system controller register set. The ADC node should be a > +sub-node of the system controller node. > + > +Required properties: > +- compatible: must be "marvell,berlin2-adc" > +- interrupts: the interrupts for the ADC and the temperature sensor > +- interrupt-names: should be "adc" and "tsen" > + > +Example: > + > +adc: adc { > + compatible = "marvell,berlin2-adc"; > + interrupt-parent = <&sic>; > + interrupts = <12>, <14>; > + interrupt-names = "adc", "tsen"; > +}; >
diff --git a/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt new file mode 100644 index 000000000000..908334c6b07f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt @@ -0,0 +1,19 @@ +* Berlin Analog to Digital Converter (ADC) + +The Berlin ADC has 8 channels, with one connected to a temperature sensor. +It is part of the system controller register set. The ADC node should be a +sub-node of the system controller node. + +Required properties: +- compatible: must be "marvell,berlin2-adc" +- interrupts: the interrupts for the ADC and the temperature sensor +- interrupt-names: should be "adc" and "tsen" + +Example: + +adc: adc { + compatible = "marvell,berlin2-adc"; + interrupt-parent = <&sic>; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; +};