new file mode 100644
@@ -0,0 +1,158 @@
+STMicroelectronics sti ASOC cards
+
+The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas
+codec or external codecs.
+
+sti sound drivers allows to expose sti SOC audio interface through the
+generic ASOC simple card. For details about sound card declaration please refer to
+Documentation/devicetree/bindings/sound/simple-card.txt.
+
+-sti-asoc-platform: audio platform engine.
+Required properties:
+ - compatible: "st,sti-audio-platform".
+ - st,syscfg: phandle to boot-device system configuration registers
+ - clocks: CPU_DAI IP clock source, listed in the same order than the
+ CPU_DAI properties.
+ - clock-names: name of the clocks listed in clocks property in the same order
+ - reg: CPU DAI IP Base address and size entries, listed in same
+ order than the CPU_DAI properties.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - interrupts: CPU_DAI interrupt line, listed in the same order than the
+ CPU_DAI properties.
+ - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same
+ order than the CPU_DAI properties.
+ - dma-names: identifier string for each DMA request line in the dmas property.
+
+- cpu-dai: sti-asoc-platform subnode that describes properties for a CPU-DAI instance.
+Required properties:
+ - dai-name: DAI name that describes the IP.
+ - uniperiph-id: internal SOC IP instance ID.
+ - version: IP version integrated in SOC.
+ - IP mode: IP working mode depending on associated codec.
+ "HDMI" connected to HDMI codec IP and IEC HDMI formats.
+ "SPDIF"connected to SPDIF codec and support SPDIF formats.
+ "PCM" PCM standard mode for I2S or TDM bus.
+
+Optional properties:
+ - standby: standby mode activation deactivation. this mode is specific to
+ Uni player IP and allows to transmit bus clock and a pattern data
+ while audio stream is stopped or paused.
+ - auto-suspend-delay: runtime auto suspend delay (in ms) before deactivating
+ stanby mode. Equivalent to the DAPM mechanism but for
+ CPU DAI.
+ - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for
+ external codecs connection.
+ - pinctrl-names: should contain only one value - "default".
+
+- sti-sas-codec: internal audio codec IPs driver
+Required properties:
+ - compatible: "st,sti<chip>-sas-codec" .
+ Should be chip "st,sti416-sas-codec" or "st,sti417-sas-codec"
+ - st,syscfg: phandle to boot-device system configuration registers.
+ - pinctrl-0: SPDIF PIO description.
+ - pinctrl-names: should contain only one value - "default".
+
+audio_controller: sti-asoc-platform {
+ #sound-dai-cells = <1>;
+ compatible = "st,sti-audio-platform";
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_PCM_0>, /*UPP 0*/
+ <&clk_s_d0_flexgen CLK_PCM_1>, /*UPP 1*/
+ <&clk_s_d0_flexgen CLK_PCM_2>, /*UPP 2*/
+ <&clk_s_d0_flexgen CLK_SPDIFF>, /*UPP 3 */
+ <0>, /*UPR 0: no clock*/
+ <0>; /*UPR 1: no clock */
+ clock-names = "uni_p0", "uni_p1", "uni_p2", "uni_p3",
+ "no_clock", "no_clock";
+ reg = <0x8D80000 0x158>, <0x8D81000 0x158>,
+ <0x8D82000 0x158>, <0x8D85000 0x158>,
+ <0x8D83000 0x158>, <0x8D84000 0x158>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>,
+ <GIC_SPI 85 IRQ_TYPE_NONE>,
+ <GIC_SPI 86 IRQ_TYPE_NONE>,
+ <GIC_SPI 89 IRQ_TYPE_NONE>,
+ <GIC_SPI 87 IRQ_TYPE_NONE>,
+ <GIC_SPI 88 IRQ_TYPE_NONE>;
+
+ dmas = <&fdma0 2 0 1>, <&fdma0 3 0 1>,
+ <&fdma0 4 0 1>, <&fdma0 7 0 1>,
+ <&fdma0 5 0 1>, <&fdma0 6 0 1>;
+
+ dma-names = "tx-0", "tx-1",
+ "tx-2", "tx-3",
+ "rx-4", "rx-5";
+ cpu-dai@0 {
+ dai-name = "Uni Player #0 (HDMI)";
+ uniperiph-id = <0>;
+ version = <5>;
+ mode = "HDMI";
+ };
+
+ cpu-dai@1 {
+ dai-name = "Uni Player #1 (PIO)";
+ uniperiph-id = <1>;
+ version = <5>;
+ mode = "PCM";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_8ch_out>;
+ };
+ cpu-dai@2 {
+ dai-name = "Uni Player #2 (DAC)";
+ uniperiph-id = <2>;
+ version = <5>;
+ mode = "PCM";
+ };
+ cpu-dai@3 {
+ dai-name = "Uni Player #3 (SPDIF)";
+ uniperiph-id = <3>;
+ version = <5>;
+ mode = "SPDIF";
+ };
+ cpu-dai@4 {
+ dai-name = "Uni Reader #0 (PCM IN)";
+ version = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_8ch_in>;
+ };
+ cpu-dai@5 {
+ dai-name = "Uni Reader #1 (HDMI)";
+ version = <3>;
+ };
+ };
+
+ sti_sas_codec: sti-sas-codec {
+ compatible = "st,stih407-sas-codec";
+ #sound-dai-cells = <1>;
+ st,reg_audio = <&syscfg_core>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif_out >;
+ };
+
+Example of audio card declaration:
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "sti audio card";
+ status = "okay";
+
+ simple-audio-card,dai-link@0 { /* DAC */
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 2>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 1>;
+ };
+ };
+ simple-audio-card,dai-link@1 { /* SPDIF */
+ format = "left_j";
+ cpu {
+ sound-dai = <&audio_controller 3>;
+ };
+
+ codec {
+ sound-dai = <&sti_sasg_codec 0>;
+ };
+ };
+ };
Add Asoc driver bindings documentation. Describe the required properties for each of the hardware IPs drivers. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> --- .../devicetree/bindings/sound/st,sti-asoc-card.txt | 158 +++++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt