diff mbox

[v2,5/6] ARM: shmobile: lager: Set clock rates for SDHI

Message ID 1433892257.12074.54.camel@codethink.co.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Ben Hutchings June 9, 2015, 11:24 p.m. UTC 
From: Ian Molton <ian.molton@codethink.co.uk>

Set the input clocks to the highest supported speeds.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Kuninori Morimoto June 11, 2015, 1:20 a.m. UTC | #1 
Hi Ben

Sorry for my small amount of question, but I would like to ask 1 thing

> diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
> index aaa4f258e279..5f68e53c58ae 100644
> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -488,6 +488,9 @@
>  	pinctrl-0 = <&sdhi0_pins>;
>  	pinctrl-names = "default";
>  
> +	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
> +	assigned-clock-rates = <156000000>;

Can we use "max-frequency" here ?
tmio/sh_mobile_sdhi have tmio_mmc_clk_update/sh_mobile_sdhi_clk_enable
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ben Hutchings June 11, 2015, 1:47 a.m. UTC | #2 
On Thu, 2015-06-11 at 01:20 +0000, Kuninori Morimoto wrote:
> Hi Ben
> 
> Sorry for my small amount of question, but I would like to ask 1 thing
> 
> > diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
> > index aaa4f258e279..5f68e53c58ae 100644
> > --- a/arch/arm/boot/dts/r8a7790-lager.dts
> > +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> > @@ -488,6 +488,9 @@
> >  	pinctrl-0 = <&sdhi0_pins>;
> >  	pinctrl-names = "default";
> >  
> > +	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
> > +	assigned-clock-rates = <156000000>;
> 
> Can we use "max-frequency" here ?
> tmio/sh_mobile_sdhi have tmio_mmc_clk_update/sh_mobile_sdhi_clk_enable

The purpose of these properties is to configure the frequency of the
clock supplied to the SDHI block.  sh_mobile_sdhi has no code to do that
but these properties are handled by the clock core.

The max-frequency property tells the MMC core the maximum clock
frequency that the host can run the SD bus at, but anyway tmio_mmc and
sh_mobile_sdhi seem to always override it.

Ben.


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aaa4f258e279..5f68e53c58ae 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -488,6 +488,9 @@ 
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
 
+	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
+	assigned-clock-rates = <156000000>;
+
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
@@ -498,6 +501,9 @@ 
 	pinctrl-0 = <&sdhi2_pins>;
 	pinctrl-names = "default";
 
+	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
+	assigned-clock-rates = <97500000>;
+
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;