@@ -259,6 +259,17 @@ config KEYBOARD_OMAP
To compile this driver as a module, choose M here: the
module will be called omap-keypad.
+config KEYBOARD_TWL4030
+ tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
+ depends on TWL4030_CORE
+ help
+ Say Y here if your board use the keypad controller on
+ TWL4030 family chips. It's safe to say enable this
+ even on boards that don't use the keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called twl4030_keypad.
+
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
depends on PXA27x || PXA3xx
@@ -19,6 +19,7 @@ obj-$(CONFIG_KEYBOARD_TOSA) += tosakbd.
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
+obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
@@ -0,0 +1,493 @@
+/*
+ * twl4030_keypad.c - driver for 8x8 keypad controller in twl4030 chips
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Code re-written for 2430SDP by:
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Initial Code:
+ * Manjunatha G K <manjugk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
+
+
+/*
+ * The TWL4030 family chips include a keypad controller that supports
+ * up to an 8x8 switch matrix. The controller can issue system wakeup
+ * events, since it uses only the always-on 32KiHz oscillator, and has
+ * an internal state machine that decodes pressed keys, including
+ * multi-key combinations.
+ *
+ * This driver lets boards define what keycodes they wish to report for
+ * which scancodes, as part of the "struct twl4030_keypad_data" used in
+ * the probe() routine.
+ *
+ * See the TPS65950 documentation; that's the general availability
+ * version of the TWL5030 second generation part.
+ */
+#define MAX_ROWS 8 /* TWL4030 hard limit */
+
+struct twl4030_keypad {
+ unsigned *keymap;
+ unsigned int keymapsize;
+ u16 kp_state[MAX_ROWS];
+ unsigned n_rows;
+ unsigned n_cols;
+ unsigned irq;
+
+ struct device *dbg_dev;
+ struct input_dev *input;
+};
+
+#define ROWCOL_MASK KEY(0xf, 0xf, 0)
+#define KEYNUM_MASK ~PERSISTENT_KEY(0xf, 0xf)
+
+/*----------------------------------------------------------------------*/
+
+/* arbitrary prescaler value 0..7 */
+#define PTV_PRESCALER 4
+
+/* Register Offsets */
+#define KEYP_CTRL 0x00
+#define KEYP_DEB 0x01
+#define KEYP_LONG_KEY 0x02
+#define KEYP_LK_PTV 0x03
+#define KEYP_TIMEOUT_L 0x04
+#define KEYP_TIMEOUT_H 0x05
+#define KEYP_KBC 0x06
+#define KEYP_KBR 0x07
+#define KEYP_SMS 0x08
+#define KEYP_FULL_CODE_7_0 0x09 /* row 0 column status */
+#define KEYP_FULL_CODE_15_8 0x0a /* ... row 1 ... */
+#define KEYP_FULL_CODE_23_16 0x0b
+#define KEYP_FULL_CODE_31_24 0x0c
+#define KEYP_FULL_CODE_39_32 0x0d
+#define KEYP_FULL_CODE_47_40 0x0e
+#define KEYP_FULL_CODE_55_48 0x0f
+#define KEYP_FULL_CODE_63_56 0x10
+#define KEYP_ISR1 0x11
+#define KEYP_IMR1 0x12
+#define KEYP_ISR2 0x13
+#define KEYP_IMR2 0x14
+#define KEYP_SIR 0x15
+#define KEYP_EDR 0x16 /* edge triggers */
+#define KEYP_SIH_CTRL 0x17
+
+/* KEYP_CTRL_REG Fields */
+#define KEYP_CTRL_SOFT_NRST BIT(0)
+#define KEYP_CTRL_SOFTMODEN BIT(1)
+#define KEYP_CTRL_LK_EN BIT(2)
+#define KEYP_CTRL_TOE_EN BIT(3)
+#define KEYP_CTRL_TOLE_EN BIT(4)
+#define KEYP_CTRL_RP_EN BIT(5)
+#define KEYP_CTRL_KBD_ON BIT(6)
+
+/* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/
+#define KEYP_PERIOD_US(t, prescale) ((t) / (31 << (prescale + 1)) - 1)
+
+/* KEYP_LK_PTV_REG Fields */
+#define KEYP_LK_PTV_PTV_SHIFT 5
+
+/* KEYP_{IMR,ISR,SIR} Fields */
+#define KEYP_IMR1_MIS BIT(3)
+#define KEYP_IMR1_TO BIT(2)
+#define KEYP_IMR1_LK BIT(1)
+#define KEYP_IMR1_KP BIT(0)
+
+/* KEYP_EDR Fields */
+#define KEYP_EDR_KP_FALLING 0x01
+#define KEYP_EDR_KP_RISING 0x02
+#define KEYP_EDR_KP_BOTH 0x03
+#define KEYP_EDR_LK_FALLING 0x04
+#define KEYP_EDR_LK_RISING 0x08
+#define KEYP_EDR_TO_FALLING 0x10
+#define KEYP_EDR_TO_RISING 0x20
+#define KEYP_EDR_MIS_FALLING 0x40
+#define KEYP_EDR_MIS_RISING 0x80
+
+
+/*----------------------------------------------------------------------*/
+
+static int twl4030_kpread(struct twl4030_keypad *kp,
+ u8 *data, u32 reg, u8 num_bytes)
+{
+ int ret;
+
+ ret = twl4030_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes);
+ if (ret < 0) {
+ dev_warn(kp->dbg_dev,
+ "Couldn't read TWL4030: %X - ret %d[%x]\n",
+ reg, ret, ret);
+ return ret;
+ }
+ return ret;
+}
+
+static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg)
+{
+ int ret;
+
+ ret = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg);
+ if (ret < 0) {
+ dev_warn(kp->dbg_dev,
+ "Could not write TWL4030: %X - ret %d[%x]\n",
+ reg, ret, ret);
+ return ret;
+ }
+ return ret;
+}
+
+static int twl4030_find_key(struct twl4030_keypad *kp, int col, int row)
+{
+ int i, rc;
+
+ rc = KEY(col, row, 0);
+ for (i = 0; i < kp->keymapsize; i++)
+ if ((kp->keymap[i] & ROWCOL_MASK) == rc)
+ return kp->keymap[i] & (KEYNUM_MASK | KEY_PERSISTENT);
+
+ return -EINVAL;
+}
+
+static inline u16 twl4030_col_xlate(struct twl4030_keypad *kp, u8 col)
+{
+ /* If all bits in a row are active for all coloumns then
+ * we have that row line connected to gnd. Mark this
+ * key on as if it was on matrix position n_cols (ie
+ * one higher than the size of the matrix).
+ */
+ if (col == 0xFF)
+ return 1 << kp->n_cols;
+ else
+ return col & ((1 << kp->n_cols) - 1);
+}
+
+static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state)
+{
+ u8 new_state[MAX_ROWS];
+ int row;
+ int ret = twl4030_kpread(kp,
+ new_state, KEYP_FULL_CODE_7_0, kp->n_rows);
+ if (ret >= 0) {
+ for (row = 0; row < kp->n_rows; row++)
+ state[row] = twl4030_col_xlate(kp, new_state[row]);
+ }
+ return ret;
+}
+
+static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
+{
+ int i;
+ u16 check = 0;
+
+ for (i = 0; i < kp->n_rows; i++) {
+ u16 col = key_state[i];
+
+ if ((col & check) && hweight16(col) > 1)
+ return 1;
+ check |= col;
+ }
+
+ return 0;
+}
+
+static void twl4030_kp_scan(struct twl4030_keypad *kp, int release_all)
+{
+ u16 new_state[MAX_ROWS];
+ int col, row;
+
+ if (release_all)
+ memset(new_state, 0, sizeof(new_state));
+ else {
+ /* check for any changes */
+ int ret = twl4030_read_kp_matrix_state(kp, new_state);
+
+ if (ret < 0) /* panic ... */
+ return;
+ if (twl4030_is_in_ghost_state(kp, new_state))
+ return;
+ }
+
+ /* check for changes and print those */
+ for (row = 0; row < kp->n_rows; row++) {
+ int changed = new_state[row] ^ kp->kp_state[row];
+
+ if (!changed)
+ continue;
+
+ for (col = 0; col < kp->n_cols; col++) {
+ int key;
+
+ if (!(changed & (1 << col)))
+ continue;
+
+ dev_dbg(kp->dbg_dev, "key [%d:%d] %s\n", row, col,
+ (new_state[row] & (1 << col)) ?
+ "press" : "release");
+
+ key = twl4030_find_key(kp, col, row);
+ if (key < 0)
+ dev_warn(kp->dbg_dev,
+ "Spurious key event %d-%d\n",
+ col, row);
+ else if (key & KEY_PERSISTENT)
+ continue;
+ else
+ input_report_key(kp->input, key,
+ new_state[row] & (1 << col));
+ }
+ kp->kp_state[row] = new_state[row];
+ }
+ input_sync(kp->input);
+}
+
+/*
+ * Keypad interrupt handler
+ */
+static irqreturn_t do_kp_irq(int irq, void *_kp)
+{
+ struct twl4030_keypad *kp = _kp;
+ u8 reg;
+ int ret;
+
+#ifdef CONFIG_LOCKDEP
+ /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which
+ * we don't want and can't tolerate. Although it might be
+ * friendlier not to borrow this thread context...
+ */
+ local_irq_enable();
+#endif
+
+ /* Read & Clear TWL4030 pending interrupt */
+ ret = twl4030_kpread(kp, ®, KEYP_ISR1, 1);
+
+ /* Release all keys if I2C has gone bad or
+ * the KEYP has gone to idle state */
+ if ((ret >= 0) && (reg & KEYP_IMR1_KP))
+ twl4030_kp_scan(kp, 0);
+ else
+ twl4030_kp_scan(kp, 1);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Registers keypad device with input subsystem
+ * and configures TWL4030 keypad registers
+ */
+static int __devinit twl4030_kp_probe(struct platform_device *pdev)
+{
+ u8 reg;
+ int i;
+ int ret = 0;
+ struct twl4030_keypad *kp;
+ struct twl4030_keypad_data *pdata = pdev->dev.platform_data;
+
+ if (!pdata || !pdata->rows || !pdata->cols || !pdata->keymap
+ || pdata->rows > 8 || pdata->cols > 8) {
+ dev_err(&pdev->dev, "Invalid platform_data\n");
+ return -EINVAL;
+ }
+
+ kp = kzalloc(sizeof(*kp), GFP_KERNEL);
+ if (!kp)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, kp);
+
+ /* Get the debug Device */
+ kp->dbg_dev = &pdev->dev;
+
+ kp->input = input_allocate_device();
+ if (!kp->input) {
+ kfree(kp);
+ return -ENOMEM;
+ }
+
+ kp->keymap = pdata->keymap;
+ kp->keymapsize = pdata->keymapsize;
+ kp->n_rows = pdata->rows;
+ kp->n_cols = pdata->cols;
+ kp->irq = platform_get_irq(pdev, 0);
+
+ /* setup input device */
+ __set_bit(EV_KEY, kp->input->evbit);
+
+ /* Enable auto repeat feature of Linux input subsystem */
+ if (pdata->rep)
+ __set_bit(EV_REP, kp->input->evbit);
+
+ for (i = 0; i < kp->keymapsize; i++)
+ __set_bit(kp->keymap[i] & KEYNUM_MASK,
+ kp->input->keybit);
+
+ kp->input->name = "TWL4030 Keypad";
+ kp->input->phys = "twl4030_keypad/input0";
+ kp->input->dev.parent = &pdev->dev;
+
+ kp->input->id.bustype = BUS_HOST;
+ kp->input->id.vendor = 0x0001;
+ kp->input->id.product = 0x0001;
+ kp->input->id.version = 0x0003;
+
+ kp->input->keycode = kp->keymap;
+ kp->input->keycodesize = sizeof(unsigned int);
+ kp->input->keycodemax = kp->keymapsize;
+
+ ret = input_register_device(kp->input);
+ if (ret < 0) {
+ dev_err(kp->dbg_dev,
+ "Unable to register twl4030 keypad device\n");
+ goto err2;
+ }
+
+ /* Enable controller, with hardware decoding but not autorepeat */
+ reg = KEYP_CTRL_SOFT_NRST | KEYP_CTRL_SOFTMODEN
+ | KEYP_CTRL_TOE_EN | KEYP_CTRL_KBD_ON;
+ ret = twl4030_kpwrite_u8(kp, reg, KEYP_CTRL);
+ if (ret < 0)
+ goto err3;
+
+ /* NOTE: we could use sih_setup() here to package keypad
+ * event sources as four different IRQs ... but we don't.
+ */
+
+ /* Enable TO rising and KP rising and falling edge detection */
+ reg = KEYP_EDR_KP_BOTH | KEYP_EDR_TO_RISING;
+ ret = twl4030_kpwrite_u8(kp, reg, KEYP_EDR);
+ if (ret < 0)
+ goto err3;
+
+ /* Set PTV prescaler Field */
+ reg = (PTV_PRESCALER << KEYP_LK_PTV_PTV_SHIFT);
+ ret = twl4030_kpwrite_u8(kp, reg, KEYP_LK_PTV);
+ if (ret < 0)
+ goto err3;
+
+ /* Set key debounce time to 20 ms */
+ i = KEYP_PERIOD_US(20000, PTV_PRESCALER);
+ ret = twl4030_kpwrite_u8(kp, i, KEYP_DEB);
+ if (ret < 0)
+ goto err3;
+
+ /* Set timeout period to 100 ms */
+ i = KEYP_PERIOD_US(200000, PTV_PRESCALER);
+ ret = twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L);
+ if (ret < 0)
+ goto err3;
+ ret = twl4030_kpwrite_u8(kp, (i >> 8), KEYP_TIMEOUT_H);
+ if (ret < 0)
+ goto err3;
+
+ /* Enable Clear-on-Read; disable remembering events that fire
+ * after the IRQ but before our handler acks (reads) them,
+ */
+ reg = TWL4030_SIH_CTRL_COR_MASK | TWL4030_SIH_CTRL_PENDDIS_MASK;
+ ret = twl4030_kpwrite_u8(kp, reg, KEYP_SIH_CTRL);
+ if (ret < 0)
+ goto err3;
+
+ /* initialize key state; irqs update it from here on */
+ ret = twl4030_read_kp_matrix_state(kp, kp->kp_state);
+ if (ret < 0)
+ goto err3;
+
+ /*
+ * This ISR will always execute in kernel thread context because of
+ * the need to access the TWL4030 over the I2C bus.
+ *
+ * NOTE: we assume this host is wired to TWL4040 INT1, not INT2 ...
+ */
+ ret = request_irq(kp->irq, do_kp_irq, 0, pdev->name, kp);
+ if (ret < 0) {
+ dev_info(kp->dbg_dev, "request_irq failed for irq no=%d\n",
+ kp->irq);
+ goto err3;
+ } else {
+ /* Enable KP and TO interrupts now. */
+ reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO);
+ ret = twl4030_kpwrite_u8(kp, reg, KEYP_IMR1);
+ if (ret < 0)
+ goto err5;
+ }
+
+ return ret;
+err5:
+ /* mask all events - we don't care about the result */
+ (void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
+ free_irq(kp->irq, NULL);
+err3:
+ input_unregister_device(kp->input);
+ kp->input = NULL;
+err2:
+ input_free_device(kp->input);
+ kfree(kp);
+ return -ENODEV;
+}
+
+static int __devexit twl4030_kp_remove(struct platform_device *pdev)
+{
+ struct twl4030_keypad *kp = platform_get_drvdata(pdev);
+
+ free_irq(kp->irq, kp);
+ input_unregister_device(kp->input);
+ kfree(kp);
+
+ return 0;
+}
+
+/*
+ * NOTE: twl4030 are multi-function devices connected via I2C.
+ * So this device is a child of an I2C parent, thus it needs to
+ * support unplug/replug (which most platform devices don't).
+ */
+
+MODULE_ALIAS("platform:twl4030_keypad");
+
+static struct platform_driver twl4030_kp_driver = {
+ .probe = twl4030_kp_probe,
+ .remove = __devexit_p(twl4030_kp_remove),
+ .driver = {
+ .name = "twl4030_keypad",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init twl4030_kp_init(void)
+{
+ return platform_driver_register(&twl4030_kp_driver);
+}
+module_init(twl4030_kp_init);
+
+static void __exit twl4030_kp_exit(void)
+{
+ platform_driver_unregister(&twl4030_kp_driver);
+}
+module_exit(twl4030_kp_exit);
+
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("TWL4030 Keypad Driver");
+MODULE_LICENSE("GPL");
@@ -255,12 +255,19 @@ struct twl4030_madc_platform_data {
int irq_line;
};
+/* Boards have uniqe mappings of {col, row} --> keycode.
+ * Column and row are 4 bits, but range only from 0..7;
+ * a PERSISTENT_KEY is "always on" and never reported.
+ */
+#define KEY_PERSISTENT 0x00800000
+#define KEY(col, row, keycode) (((col) << 28) | ((row) << 24) | (keycode))
+#define PERSISTENT_KEY(c, r) KEY((c), (r), KEY_PERSISTENT)
+
struct twl4030_keypad_data {
- int rows;
- int cols;
- int *keymap;
- int irq;
- unsigned int keymapsize;
+ unsigned rows;
+ unsigned cols;
+ unsigned *keymap;
+ unsigned short keymapsize;
unsigned int rep:1;
};