Message ID | 1435203465-11592-2-git-send-email-mranostay@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 25 June 2015 at 05:37, Matt Ranostay <mranostay@gmail.com> wrote: > Puts device into DEEP SLEEP when no LEDs are in in the on-state, and no > input_handlers are in use. Also uses *_autosuspend to prevent a LED > trigger from constantly suspending and resuming device. > > Signed-off-by: Matt Ranostay <mranostay@gmail.com> > --- > drivers/input/keyboard/cap11xx.c | 75 ++++++++++++++++++++++++++++++---------- > 1 file changed, 57 insertions(+), 18 deletions(-) > > diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c > index b983b5a..4dc7690 100644 > --- a/drivers/input/keyboard/cap11xx.c > +++ b/drivers/input/keyboard/cap11xx.c > @@ -14,6 +14,7 @@ > #include <linux/input.h> > #include <linux/leds.h> > #include <linux/of_irq.h> > +#include <linux/pm_runtime.h> > #include <linux/regmap.h> > #include <linux/i2c.h> > #include <linux/gpio/consumer.h> > @@ -84,9 +85,9 @@ struct cap11xx_led { > struct cap11xx_priv { > struct regmap *regmap; > struct input_dev *idev; > + struct i2c_client *i2c_client; > > struct cap11xx_led *leds; > - int num_leds; > > /* config */ > u32 keycodes[]; > @@ -207,13 +208,6 @@ out: > > static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) > { > -#ifdef CONFIG_LEDS_CLASS > - /* > - * DLSEEP mode will turn off all LEDS, prevent this > - */ > - if (priv->num_leds) > - return 0; > -#endif > return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, > CAP11XX_REG_MAIN_CONTROL_DLSEEP, > sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); > @@ -223,14 +217,16 @@ static int cap11xx_input_open(struct input_dev *idev) > { > struct cap11xx_priv *priv = input_get_drvdata(idev); > > - return cap11xx_set_sleep(priv, false); > + pm_runtime_get(&priv->i2c_client->dev); > + > + return 0; > } > > static void cap11xx_input_close(struct input_dev *idev) > { > struct cap11xx_priv *priv = input_get_drvdata(idev); > > - cap11xx_set_sleep(priv, true); > + pm_runtime_put_autosuspend(&priv->i2c_client->dev); > } > > #ifdef CONFIG_LEDS_CLASS > @@ -252,10 +248,16 @@ static void cap11xx_led_set(struct led_classdev *cdev, > enum led_brightness value) > { > struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); > + struct cap11xx_priv *priv = led->priv; > > if (led->new_brightness == value) > return; > > + if (value) > + pm_runtime_get(&priv->i2c_client->dev); > + else > + pm_runtime_put_autosuspend(&priv->i2c_client->dev); > + > led->new_brightness = value; > schedule_work(&led->work); > } > @@ -312,7 +314,6 @@ static int cap11xx_init_leds(struct device *dev, > error = devm_led_classdev_register(dev, &led->cdev); > if (error < 0) > return -EINVAL; > - priv->num_leds++; > led++; > }; > > @@ -446,17 +447,23 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, > priv->idev->open = cap11xx_input_open; > priv->idev->close = cap11xx_input_close; > > - error = cap11xx_init_leds(dev, priv, cap->num_leds); > + error = cap11xx_set_sleep(priv, true); > if (error) > return error; > > - input_set_drvdata(priv->idev, priv); > + error = pm_runtime_set_active(dev); > + if (error) > + return error; > > - /* > - * Put the device in deep sleep mode for now. > - * ->open() will bring it back once the it is actually needed. > - */ > - cap11xx_set_sleep(priv, true); > + pm_runtime_enable(dev); > + pm_runtime_set_autosuspend_delay(dev, 1000); > + pm_runtime_use_autosuspend(dev); > + > + error = cap11xx_init_leds(dev, priv, cap->num_leds); > + if (error) > + return error; > + priv->i2c_client = i2c_client; > + input_set_drvdata(priv->idev, priv); > > error = input_register_device(priv->idev); > if (error) > @@ -476,6 +483,17 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, > return 0; > } > > +static int cap11xx_i2c_remove(struct i2c_client *i2c_client) > +{ > + struct cap11xx_priv *priv = i2c_get_clientdata(i2c_client); > + > + pm_runtime_disable(&i2c_client->dev); > + pm_runtime_set_suspended(&i2c_client->dev); > + cap11xx_set_sleep(priv, true); > + > + return 0; > +} > + > static const struct of_device_id cap11xx_dt_ids[] = { > { .compatible = "microchip,cap1106", }, > { .compatible = "microchip,cap1126", }, > @@ -492,14 +510,35 @@ static const struct i2c_device_id cap11xx_i2c_ids[] = { > }; > MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids); > You should add: #ifdef CONFIG_PM around the runtime PM callbacks. It will prevent compiler warnings about unused functions when building with CONFIG_PM unset. > +static int cap11xx_runtime_suspend(struct device *dev) > +{ > + struct cap11xx_priv *priv = i2c_get_clientdata(to_i2c_client(dev)); > + > + return cap11xx_set_sleep(priv, true); > +} > + > +static int cap11xx_runtime_resume(struct device *dev) > +{ > + struct cap11xx_priv *priv = i2c_get_clientdata(to_i2c_client(dev)); > + > + return cap11xx_set_sleep(priv, false); > +} > + > +static const struct dev_pm_ops cap11xx_pm_ops = { > + SET_RUNTIME_PM_OPS(cap11xx_runtime_suspend, > + cap11xx_runtime_resume, NULL) > +}; > + > static struct i2c_driver cap11xx_i2c_driver = { > .driver = { > .name = "cap11xx", > .owner = THIS_MODULE, > .of_match_table = cap11xx_dt_ids, > + .pm = &cap11xx_pm_ops, > }, > .id_table = cap11xx_i2c_ids, > .probe = cap11xx_i2c_probe, > + .remove = cap11xx_i2c_remove, > }; > > module_i2c_driver(cap11xx_i2c_driver); > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c index b983b5a..4dc7690 100644 --- a/drivers/input/keyboard/cap11xx.c +++ b/drivers/input/keyboard/cap11xx.c @@ -14,6 +14,7 @@ #include <linux/input.h> #include <linux/leds.h> #include <linux/of_irq.h> +#include <linux/pm_runtime.h> #include <linux/regmap.h> #include <linux/i2c.h> #include <linux/gpio/consumer.h> @@ -84,9 +85,9 @@ struct cap11xx_led { struct cap11xx_priv { struct regmap *regmap; struct input_dev *idev; + struct i2c_client *i2c_client; struct cap11xx_led *leds; - int num_leds; /* config */ u32 keycodes[]; @@ -207,13 +208,6 @@ out: static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) { -#ifdef CONFIG_LEDS_CLASS - /* - * DLSEEP mode will turn off all LEDS, prevent this - */ - if (priv->num_leds) - return 0; -#endif return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, CAP11XX_REG_MAIN_CONTROL_DLSEEP, sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); @@ -223,14 +217,16 @@ static int cap11xx_input_open(struct input_dev *idev) { struct cap11xx_priv *priv = input_get_drvdata(idev); - return cap11xx_set_sleep(priv, false); + pm_runtime_get(&priv->i2c_client->dev); + + return 0; } static void cap11xx_input_close(struct input_dev *idev) { struct cap11xx_priv *priv = input_get_drvdata(idev); - cap11xx_set_sleep(priv, true); + pm_runtime_put_autosuspend(&priv->i2c_client->dev); } #ifdef CONFIG_LEDS_CLASS @@ -252,10 +248,16 @@ static void cap11xx_led_set(struct led_classdev *cdev, enum led_brightness value) { struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); + struct cap11xx_priv *priv = led->priv; if (led->new_brightness == value) return; + if (value) + pm_runtime_get(&priv->i2c_client->dev); + else + pm_runtime_put_autosuspend(&priv->i2c_client->dev); + led->new_brightness = value; schedule_work(&led->work); } @@ -312,7 +314,6 @@ static int cap11xx_init_leds(struct device *dev, error = devm_led_classdev_register(dev, &led->cdev); if (error < 0) return -EINVAL; - priv->num_leds++; led++; }; @@ -446,17 +447,23 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, priv->idev->open = cap11xx_input_open; priv->idev->close = cap11xx_input_close; - error = cap11xx_init_leds(dev, priv, cap->num_leds); + error = cap11xx_set_sleep(priv, true); if (error) return error; - input_set_drvdata(priv->idev, priv); + error = pm_runtime_set_active(dev); + if (error) + return error; - /* - * Put the device in deep sleep mode for now. - * ->open() will bring it back once the it is actually needed. - */ - cap11xx_set_sleep(priv, true); + pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, 1000); + pm_runtime_use_autosuspend(dev); + + error = cap11xx_init_leds(dev, priv, cap->num_leds); + if (error) + return error; + priv->i2c_client = i2c_client; + input_set_drvdata(priv->idev, priv); error = input_register_device(priv->idev); if (error) @@ -476,6 +483,17 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, return 0; } +static int cap11xx_i2c_remove(struct i2c_client *i2c_client) +{ + struct cap11xx_priv *priv = i2c_get_clientdata(i2c_client); + + pm_runtime_disable(&i2c_client->dev); + pm_runtime_set_suspended(&i2c_client->dev); + cap11xx_set_sleep(priv, true); + + return 0; +} + static const struct of_device_id cap11xx_dt_ids[] = { { .compatible = "microchip,cap1106", }, { .compatible = "microchip,cap1126", }, @@ -492,14 +510,35 @@ static const struct i2c_device_id cap11xx_i2c_ids[] = { }; MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids); +static int cap11xx_runtime_suspend(struct device *dev) +{ + struct cap11xx_priv *priv = i2c_get_clientdata(to_i2c_client(dev)); + + return cap11xx_set_sleep(priv, true); +} + +static int cap11xx_runtime_resume(struct device *dev) +{ + struct cap11xx_priv *priv = i2c_get_clientdata(to_i2c_client(dev)); + + return cap11xx_set_sleep(priv, false); +} + +static const struct dev_pm_ops cap11xx_pm_ops = { + SET_RUNTIME_PM_OPS(cap11xx_runtime_suspend, + cap11xx_runtime_resume, NULL) +}; + static struct i2c_driver cap11xx_i2c_driver = { .driver = { .name = "cap11xx", .owner = THIS_MODULE, .of_match_table = cap11xx_dt_ids, + .pm = &cap11xx_pm_ops, }, .id_table = cap11xx_i2c_ids, .probe = cap11xx_i2c_probe, + .remove = cap11xx_i2c_remove, }; module_i2c_driver(cap11xx_i2c_driver);
Puts device into DEEP SLEEP when no LEDs are in in the on-state, and no input_handlers are in use. Also uses *_autosuspend to prevent a LED trigger from constantly suspending and resuming device. Signed-off-by: Matt Ranostay <mranostay@gmail.com> --- drivers/input/keyboard/cap11xx.c | 75 ++++++++++++++++++++++++++++++---------- 1 file changed, 57 insertions(+), 18 deletions(-)