diff mbox

ath10k: Fix target to cpu address conversion logic

Message ID 1435931727-300-1-git-send-email-vthiagar@qti.qualcomm.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Vasanthakumar Thiagarajan July 3, 2015, 1:55 p.m. UTC 
'commit 418ca5992e2f ("ath10k: Make target cpu address to
CE address conversion chip specific")' mask 0x7fff is added
by mistake instead of 0x7ff. Fix this regression.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Kalle Valo July 11, 2015, 4:21 p.m. UTC | #1 
Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> writes:

> 'commit 418ca5992e2f ("ath10k: Make target cpu address to
> CE address conversion chip specific")' mask 0x7fff is added
> by mistake instead of 0x7ff. Fix this regression.
>
> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>

Thanks, applied.
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 130746b..a69bfa4 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -765,7 +765,7 @@  static u32 ath10k_pci_targ_cpu_to_ce_addr(struct ath10k *ar, u32 addr)
 	case ATH10K_HW_QCA6174:
 		val = (ath10k_pci_read32(ar, SOC_CORE_BASE_ADDRESS +
 					  CORE_CTRL_ADDRESS) &
-		       0x7fff) << 21;
+		       0x7ff) << 21;
 		break;
 	case ATH10K_HW_QCA99X0:
 		val = ath10k_pci_read32(ar, PCIE_BAR_REG_ADDRESS);