| Message ID | 1436269963-25885-1-git-send-email-phil.edworthy@renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
Hi Phil, Thank you for the patch. On Tuesday 07 July 2015 12:52:43 Phil Edworthy wrote: > These changes allow a PHY driver to trigger a VBUS interrupt and > to provide the value of VBUS. > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> This looks much better to me. I just have two comments, please see below. > --- > v5: > - Avoid race when vbus_is_indirect may or may not be read > before the phy has called vbus_session. In doing so, the > changes have also been isolated to mod_gadget.c > > v4: > - Use true/false with bool vars. > - Clean up "transceiver found" message. > > v3: > - Changed how indirect vbus is plumbed in. > - Removed unnecessary (void) on call to otg_set_peripheral. > - Moved code that connects to bus through transceiver so it > is before setting gpriv->driver. > > v2: > - vbus variables changed from int to bool. > - dev_info() changed to dev_err() > --- > drivers/usb/renesas_usbhs/mod_gadget.c | 62 +++++++++++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > > diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c > b/drivers/usb/renesas_usbhs/mod_gadget.c index dc2aa32..19a22a3 100644 > --- a/drivers/usb/renesas_usbhs/mod_gadget.c > +++ b/drivers/usb/renesas_usbhs/mod_gadget.c > @@ -21,6 +21,7 @@ > #include <linux/platform_device.h> > #include <linux/usb/ch9.h> > #include <linux/usb/gadget.h> > +#include <linux/usb/otg.h> > #include "common.h" > > /* > @@ -50,6 +51,8 @@ struct usbhsg_gpriv { > int uep_size; > > struct usb_gadget_driver *driver; > + struct usb_phy *transceiver; > + bool vbus_indirect_value; How about naming this vbus_connected ? A boolean "value" doesn't mean much. > > u32 status; > #define USBHSG_STATUS_STARTED (1 << 0) > @@ -873,6 +876,27 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 > status) } > > /* > + * VBUS provided by the PHY > + */ > +static int usbhsm_phy_get_vbus(struct platform_device *pdev) > +{ > + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); > + struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); > + > + return gpriv->vbus_indirect_value; > +} > + > +static void usbhs_mod_phy_mode(struct usbhs_priv *priv) > +{ > + struct usbhs_mod_info *info = &priv->mod_info; > + > + info->irq_vbus = NULL; > + priv->pfunc.get_vbus = usbhsm_phy_get_vbus; > + > + usbhs_irq_callback_update(priv, NULL); > +} > + > +/* > * > * linux usb function > * > @@ -882,12 +906,28 @@ static int usbhsg_gadget_start(struct usb_gadget > *gadget, { > struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); > struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > + struct device *dev = usbhs_priv_to_dev(priv); > + int ret; > > if (!driver || > !driver->setup || > driver->max_speed < USB_SPEED_FULL) > return -EINVAL; > > + /* connect to bus through transceiver */ > + if (!IS_ERR_OR_NULL(gpriv->transceiver)) { > + ret = otg_set_peripheral(gpriv->transceiver->otg, > + &gpriv->gadget); > + if (ret) { > + dev_err(dev, "%s: can't bind to transceiver\n", > + gpriv->gadget.name); > + return ret; > + } > + > + /* get vbus using phy versions */ > + usbhs_mod_phy_mode(priv); Given that the presence of an external PHY is known at probe time, couldn't this call be moved to the probe function ? It would then probably conflict with the usbhs_mod_autonomy_mode() call from usbhs_probe(), which would need to be fixed. > + } > + > /* first hook up the driver ... */ > gpriv->driver = driver; > > @@ -900,6 +940,10 @@ static int usbhsg_gadget_stop(struct usb_gadget > *gadget) struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > > usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); > + > + if (!IS_ERR_OR_NULL(gpriv->transceiver)) > + otg_set_peripheral(gpriv->transceiver->otg, NULL); > + > gpriv->driver = NULL; > > return 0; > @@ -947,12 +991,26 @@ static int usbhsg_set_selfpowered(struct usb_gadget > *gadget, int is_self) return 0; > } > > +static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active) > +{ > + struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); > + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > + struct platform_device *pdev = usbhs_priv_to_pdev(priv); > + > + gpriv->vbus_indirect_value = !!is_active; > + > + renesas_usbhs_call_notify_hotplug(pdev); > + > + return 0; > +} > + > static const struct usb_gadget_ops usbhsg_gadget_ops = { > .get_frame = usbhsg_get_frame, > .set_selfpowered = usbhsg_set_selfpowered, > .udc_start = usbhsg_gadget_start, > .udc_stop = usbhsg_gadget_stop, > .pullup = usbhsg_pullup, > + .vbus_session = usbhsg_vbus_session, > }; > > static int usbhsg_start(struct usbhs_priv *priv) > @@ -994,6 +1052,10 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) > goto usbhs_mod_gadget_probe_err_gpriv; > } > > + gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); > + dev_info(dev, "%stransceiver found\n", > + gpriv->transceiver ? "" : "no "); > + > /* > * CAUTION > *
Hi Laurent, On 08 July 2015 00:08, Laurent wrote: > Hi Phil, > > Thank you for the patch. > > On Tuesday 07 July 2015 12:52:43 Phil Edworthy wrote: > > These changes allow a PHY driver to trigger a VBUS interrupt and > > to provide the value of VBUS. > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> > > This looks much better to me. I just have two comments, please see below. > > > --- > > v5: > > - Avoid race when vbus_is_indirect may or may not be read > > before the phy has called vbus_session. In doing so, the > > changes have also been isolated to mod_gadget.c > > > > v4: > > - Use true/false with bool vars. > > - Clean up "transceiver found" message. > > > > v3: > > - Changed how indirect vbus is plumbed in. > > - Removed unnecessary (void) on call to otg_set_peripheral. > > - Moved code that connects to bus through transceiver so it > > is before setting gpriv->driver. > > > > v2: > > - vbus variables changed from int to bool. > > - dev_info() changed to dev_err() > > --- > > drivers/usb/renesas_usbhs/mod_gadget.c | 62 > +++++++++++++++++++++++++++++++ > > 1 file changed, 62 insertions(+) > > > > diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c > > b/drivers/usb/renesas_usbhs/mod_gadget.c index dc2aa32..19a22a3 100644 > > --- a/drivers/usb/renesas_usbhs/mod_gadget.c > > +++ b/drivers/usb/renesas_usbhs/mod_gadget.c > > @@ -21,6 +21,7 @@ > > #include <linux/platform_device.h> > > #include <linux/usb/ch9.h> > > #include <linux/usb/gadget.h> > > +#include <linux/usb/otg.h> > > #include "common.h" > > > > /* > > @@ -50,6 +51,8 @@ struct usbhsg_gpriv { > > int uep_size; > > > > struct usb_gadget_driver *driver; > > + struct usb_phy *transceiver; > > + bool vbus_indirect_value; > > How about naming this vbus_connected ? A boolean "value" doesn't mean much. Hmm, vbus_connected isn't right either. This variable directly maps to the vbus signal, i.e. this variable is true when the signal is high. I'll change it to vbus_active. > > > > u32 status; > > #define USBHSG_STATUS_STARTED (1 << 0) > > @@ -873,6 +876,27 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 > > status) } > > > > /* > > + * VBUS provided by the PHY > > + */ > > +static int usbhsm_phy_get_vbus(struct platform_device *pdev) > > +{ > > + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); > > + struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); > > + > > + return gpriv->vbus_indirect_value; > > +} > > + > > +static void usbhs_mod_phy_mode(struct usbhs_priv *priv) > > +{ > > + struct usbhs_mod_info *info = &priv->mod_info; > > + > > + info->irq_vbus = NULL; > > + priv->pfunc.get_vbus = usbhsm_phy_get_vbus; > > + > > + usbhs_irq_callback_update(priv, NULL); > > +} > > + > > +/* > > * > > * linux usb function > > * > > @@ -882,12 +906,28 @@ static int usbhsg_gadget_start(struct usb_gadget > > *gadget, { > > struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); > > struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > > + struct device *dev = usbhs_priv_to_dev(priv); > > + int ret; > > > > if (!driver || > > !driver->setup || > > driver->max_speed < USB_SPEED_FULL) > > return -EINVAL; > > > > + /* connect to bus through transceiver */ > > + if (!IS_ERR_OR_NULL(gpriv->transceiver)) { > > + ret = otg_set_peripheral(gpriv->transceiver->otg, > > + &gpriv->gadget); > > + if (ret) { > > + dev_err(dev, "%s: can't bind to transceiver\n", > > + gpriv->gadget.name); > > + return ret; > > + } > > + > > + /* get vbus using phy versions */ > > + usbhs_mod_phy_mode(priv); > > Given that the presence of an external PHY is known at probe time, couldn't > this call be moved to the probe function ? It would then probably conflict > with the usbhs_mod_autonomy_mode() call from usbhs_probe(), which would > need to be fixed. You could do this, but as you say it would conflict with usbhs_probe(). I can't see a simple way to check for the external phy connection, so I would prefer to keep it here. Is that ok? > > + } > > + > > /* first hook up the driver ... */ > > gpriv->driver = driver; > > > > @@ -900,6 +940,10 @@ static int usbhsg_gadget_stop(struct usb_gadget > > *gadget) struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > > > > usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); > > + > > + if (!IS_ERR_OR_NULL(gpriv->transceiver)) > > + otg_set_peripheral(gpriv->transceiver->otg, NULL); > > + > > gpriv->driver = NULL; > > > > return 0; > > @@ -947,12 +991,26 @@ static int usbhsg_set_selfpowered(struct usb_gadget > > *gadget, int is_self) return 0; > > } > > > > +static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active) > > +{ > > + struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); > > + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > > + struct platform_device *pdev = usbhs_priv_to_pdev(priv); > > + > > + gpriv->vbus_indirect_value = !!is_active; > > + > > + renesas_usbhs_call_notify_hotplug(pdev); > > + > > + return 0; > > +} > > + > > static const struct usb_gadget_ops usbhsg_gadget_ops = { > > .get_frame = usbhsg_get_frame, > > .set_selfpowered = usbhsg_set_selfpowered, > > .udc_start = usbhsg_gadget_start, > > .udc_stop = usbhsg_gadget_stop, > > .pullup = usbhsg_pullup, > > + .vbus_session = usbhsg_vbus_session, > > }; > > > > static int usbhsg_start(struct usbhs_priv *priv) > > @@ -994,6 +1052,10 @@ int usbhs_mod_gadget_probe(struct usbhs_priv > *priv) > > goto usbhs_mod_gadget_probe_err_gpriv; > > } > > > > + gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); > > + dev_info(dev, "%stransceiver found\n", > > + gpriv->transceiver ? "" : "no "); > > + > > /* > > * CAUTION > > * > > -- > Regards, > > Laurent Pinchart Thanks Phil -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Phil, On Wednesday 08 July 2015 08:08:27 Phil Edworthy wrote: > On 08 July 2015 00:08, Laurent wrote: > > On Tuesday 07 July 2015 12:52:43 Phil Edworthy wrote: > > > These changes allow a PHY driver to trigger a VBUS interrupt and > > > to provide the value of VBUS. > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> > > > > This looks much better to me. I just have two comments, please see below. > > > > > --- > > > > > > v5: > > > - Avoid race when vbus_is_indirect may or may not be read > > > > > > before the phy has called vbus_session. In doing so, the > > > changes have also been isolated to mod_gadget.c > > > > > > v4: > > > - Use true/false with bool vars. > > > - Clean up "transceiver found" message. > > > > > > v3: > > > - Changed how indirect vbus is plumbed in. > > > - Removed unnecessary (void) on call to otg_set_peripheral. > > > - Moved code that connects to bus through transceiver so it > > > > > > is before setting gpriv->driver. > > > > > > v2: > > > - vbus variables changed from int to bool. > > > - dev_info() changed to dev_err() > > > > > > --- > > > > > > drivers/usb/renesas_usbhs/mod_gadget.c | 62 +++++++++++++++++++++++++++ > > > 1 file changed, 62 insertions(+) > > > > > > diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c > > > b/drivers/usb/renesas_usbhs/mod_gadget.c index dc2aa32..19a22a3 100644 > > > --- a/drivers/usb/renesas_usbhs/mod_gadget.c > > > +++ b/drivers/usb/renesas_usbhs/mod_gadget.c [snip] > > > @@ -882,12 +906,28 @@ static int usbhsg_gadget_start(struct usb_gadget > > > *gadget, > > > { > > > struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); > > > struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > > > + struct device *dev = usbhs_priv_to_dev(priv); > > > + int ret; > > > > > > if (!driver || > > > !driver->setup || > > > driver->max_speed < USB_SPEED_FULL) > > > return -EINVAL; > > > > > > + /* connect to bus through transceiver */ > > > + if (!IS_ERR_OR_NULL(gpriv->transceiver)) { > > > + ret = otg_set_peripheral(gpriv->transceiver->otg, > > > + &gpriv->gadget); > > > + if (ret) { > > > + dev_err(dev, "%s: can't bind to transceiver\n", > > > + gpriv->gadget.name); > > > + return ret; > > > + } > > > + > > > + /* get vbus using phy versions */ > > > + usbhs_mod_phy_mode(priv); > > > > Given that the presence of an external PHY is known at probe time, > > couldn't this call be moved to the probe function ? It would then probably > > conflict with the usbhs_mod_autonomy_mode() call from usbhs_probe(), which > > would need to be fixed. > > You could do this, but as you say it would conflict with usbhs_probe(). I > can't see a simple way to check for the external phy connection, so I would > prefer to keep it here. > Is that ok? I can live with that, but I can't help feeling that it's not the best architecture. Coming to think about it, why do we get the transceiver (by calling usb_get_phy) in the gadget code ? Isn't the transceiver shared between host and peripheral modes ? Shouldn't it be handled by core code then ? I might miss something as my knowledge of the USB subsystem isn't perfect. If we decide to refactor the code it can be done in a follow-up patch, this patch has been delayed for long enough. > > > + } > > > + > > > > > > /* first hook up the driver ... */ > > > gpriv->driver = driver;
Hi Laurent, On 09 July 2015 02:03, Laurent wrote: > Hi Phil, > > On Wednesday 08 July 2015 08:08:27 Phil Edworthy wrote: > > On 08 July 2015 00:08, Laurent wrote: > > > On Tuesday 07 July 2015 12:52:43 Phil Edworthy wrote: > > > > These changes allow a PHY driver to trigger a VBUS interrupt and > > > > to provide the value of VBUS. > > > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> > > > > > > This looks much better to me. I just have two comments, please see below. > > > > > > > --- > > > > > > > > v5: > > > > - Avoid race when vbus_is_indirect may or may not be read > > > > > > > > before the phy has called vbus_session. In doing so, the > > > > changes have also been isolated to mod_gadget.c > > > > > > > > v4: > > > > - Use true/false with bool vars. > > > > - Clean up "transceiver found" message. > > > > > > > > v3: > > > > - Changed how indirect vbus is plumbed in. > > > > - Removed unnecessary (void) on call to otg_set_peripheral. > > > > - Moved code that connects to bus through transceiver so it > > > > > > > > is before setting gpriv->driver. > > > > > > > > v2: > > > > - vbus variables changed from int to bool. > > > > - dev_info() changed to dev_err() > > > > > > > > --- > > > > > > > > drivers/usb/renesas_usbhs/mod_gadget.c | 62 > +++++++++++++++++++++++++++ > > > > 1 file changed, 62 insertions(+) > > > > > > > > diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c > > > > b/drivers/usb/renesas_usbhs/mod_gadget.c index dc2aa32..19a22a3 > 100644 > > > > --- a/drivers/usb/renesas_usbhs/mod_gadget.c > > > > +++ b/drivers/usb/renesas_usbhs/mod_gadget.c > > [snip] > > > > > @@ -882,12 +906,28 @@ static int usbhsg_gadget_start(struct usb_gadget > > > > *gadget, > > > > { > > > > struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); > > > > struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); > > > > + struct device *dev = usbhs_priv_to_dev(priv); > > > > + int ret; > > > > > > > > if (!driver || > > > > !driver->setup || > > > > driver->max_speed < USB_SPEED_FULL) > > > > return -EINVAL; > > > > > > > > + /* connect to bus through transceiver */ > > > > + if (!IS_ERR_OR_NULL(gpriv->transceiver)) { > > > > + ret = otg_set_peripheral(gpriv->transceiver->otg, > > > > + &gpriv->gadget); > > > > + if (ret) { > > > > + dev_err(dev, "%s: can't bind to transceiver\n", > > > > + gpriv->gadget.name); > > > > + return ret; > > > > + } > > > > + > > > > + /* get vbus using phy versions */ > > > > + usbhs_mod_phy_mode(priv); > > > > > > Given that the presence of an external PHY is known at probe time, > > > couldn't this call be moved to the probe function ? It would then probably > > > conflict with the usbhs_mod_autonomy_mode() call from usbhs_probe(), > which > > > would need to be fixed. > > > > You could do this, but as you say it would conflict with usbhs_probe(). I > > can't see a simple way to check for the external phy connection, so I would > > prefer to keep it here. > > Is that ok? > > I can live with that, but I can't help feeling that it's not the best > architecture. Coming to think about it, why do we get the transceiver (by > calling usb_get_phy) in the gadget code ? Isn't the transceiver shared between > host and peripheral modes ? Shouldn't it be handled by core code then ? I > might miss something as my knowledge of the USB subsystem isn't perfect. I suspect your knowledge of it is much better than mine! > If we decide to refactor the code it can be done in a follow-up patch, this > patch has been delayed for long enough. Ok, thanks. I'll fix the variable name and re-post. > > > > + } > > > > + > > > > > > > > /* first hook up the driver ... */ > > > > gpriv->driver = driver; > > -- > Regards, > > Laurent Pinchart Thanks Phil -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index dc2aa32..19a22a3 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -21,6 +21,7 @@ #include <linux/platform_device.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/otg.h> #include "common.h" /* @@ -50,6 +51,8 @@ struct usbhsg_gpriv { int uep_size; struct usb_gadget_driver *driver; + struct usb_phy *transceiver; + bool vbus_indirect_value; u32 status; #define USBHSG_STATUS_STARTED (1 << 0) @@ -873,6 +876,27 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) } /* + * VBUS provided by the PHY + */ +static int usbhsm_phy_get_vbus(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + + return gpriv->vbus_indirect_value; +} + +static void usbhs_mod_phy_mode(struct usbhs_priv *priv) +{ + struct usbhs_mod_info *info = &priv->mod_info; + + info->irq_vbus = NULL; + priv->pfunc.get_vbus = usbhsm_phy_get_vbus; + + usbhs_irq_callback_update(priv, NULL); +} + +/* * * linux usb function * @@ -882,12 +906,28 @@ static int usbhsg_gadget_start(struct usb_gadget *gadget, { struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); + struct device *dev = usbhs_priv_to_dev(priv); + int ret; if (!driver || !driver->setup || driver->max_speed < USB_SPEED_FULL) return -EINVAL; + /* connect to bus through transceiver */ + if (!IS_ERR_OR_NULL(gpriv->transceiver)) { + ret = otg_set_peripheral(gpriv->transceiver->otg, + &gpriv->gadget); + if (ret) { + dev_err(dev, "%s: can't bind to transceiver\n", + gpriv->gadget.name); + return ret; + } + + /* get vbus using phy versions */ + usbhs_mod_phy_mode(priv); + } + /* first hook up the driver ... */ gpriv->driver = driver; @@ -900,6 +940,10 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget) struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); + + if (!IS_ERR_OR_NULL(gpriv->transceiver)) + otg_set_peripheral(gpriv->transceiver->otg, NULL); + gpriv->driver = NULL; return 0; @@ -947,12 +991,26 @@ static int usbhsg_set_selfpowered(struct usb_gadget *gadget, int is_self) return 0; } +static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); + struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + gpriv->vbus_indirect_value = !!is_active; + + renesas_usbhs_call_notify_hotplug(pdev); + + return 0; +} + static const struct usb_gadget_ops usbhsg_gadget_ops = { .get_frame = usbhsg_get_frame, .set_selfpowered = usbhsg_set_selfpowered, .udc_start = usbhsg_gadget_start, .udc_stop = usbhsg_gadget_stop, .pullup = usbhsg_pullup, + .vbus_session = usbhsg_vbus_session, }; static int usbhsg_start(struct usbhs_priv *priv) @@ -994,6 +1052,10 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) goto usbhs_mod_gadget_probe_err_gpriv; } + gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); + dev_info(dev, "%stransceiver found\n", + gpriv->transceiver ? "" : "no "); + /* * CAUTION *
These changes allow a PHY driver to trigger a VBUS interrupt and to provide the value of VBUS. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> --- v5: - Avoid race when vbus_is_indirect may or may not be read before the phy has called vbus_session. In doing so, the changes have also been isolated to mod_gadget.c v4: - Use true/false with bool vars. - Clean up "transceiver found" message. v3: - Changed how indirect vbus is plumbed in. - Removed unnecessary (void) on call to otg_set_peripheral. - Moved code that connects to bus through transceiver so it is before setting gpriv->driver. v2: - vbus variables changed from int to bool. - dev_info() changed to dev_err() --- drivers/usb/renesas_usbhs/mod_gadget.c | 62 ++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)