diff mbox

[RFC] pinctrl-single: Use of pinctrl-single for external device over I2C

Message ID 1435855992-10312-1-git-send-email-vaibhav.hiremath@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Vaibhav Hiremath July 2, 2015, 4:53 p.m. UTC
Disclaimer: This is just proof of concept, to trigger discussion on this.
As pinctrl-single driver is used by many platforms, we should be very careful
here.
I have kept couple of print statement delibrately to match regmap.

Summary:

In some usecases, the external device (in my case it PMIC over I2C)
does support pin in multiple configuration, we may need to control/configure them
during boot or runtime.

In my usecase of PMIC 88PM860, as per spec, 88PM860.GPIO_0 can be configured to

  000 = GPIO input mode
  001 = GPIO output mode
  010 = SLEEPOUTN mirror mode
  011 = Buck4 FPWM enable
  100 = 32 Khz output buffer mode
  101 = PMICINTN output mode
  110 = HW_RESET1 mode
  111 = HW_RESET2 mode

You can get more details on History or past discussion on this subject -
  https://lkml.org/lkml/2015/6/23/170

So we discussed about using pinctrl-single driver for this, but as we know,
pinctrl-single driver has some restrictions,
  - use raw read/write
  - use of raw spin lock api's

I started with writing fresh driver for pinctrl-i2c, but during that I felt
I am just duplicating all the code, so decided to see whether we can reuse
pinctrl-single driver.

So this patch is proof of concept for using pinctrl-single driver for external
devices, over I2C, SPI, etc...

The idea here is,
Represent external device as another 'pinctrl' device, and get hold of it's regmap
using dev_get_regmap() on parent. This works :)

Still I haven't figured out how to handle raw_spic_lock api's as I2C bus
may sleep and you can not disable preemption. So currently it does print anoying BUG
inside pcs_set_mux().

Testing:
  - I have tested this on BeagleBone Bloack
  - PXA1928 based platform for MMIO (PXA native muxing)
  - PMIC 88PM800 muxing (GPIO 0)

Comments are welcome...good, bad, accepted, nacked, acked, suggestions...

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
---
 arch/arm64/boot/dts/marvell/pxa1928-helium.dts |  15 +++
 drivers/mfd/88pm800.c                          |  41 +++++++
 drivers/pinctrl/pinctrl-single.c               | 159 +++++++++++++------------
 3 files changed, 140 insertions(+), 75 deletions(-)

Comments

Tony Lindgren July 6, 2015, 6:35 a.m. UTC | #1
* Vaibhav Hiremath <vaibhav.hiremath@linaro.org> [150702 09:58]:
> --- a/drivers/pinctrl/pinctrl-single.c
> +++ b/drivers/pinctrl/pinctrl-single.c
>  
> -static unsigned __maybe_unused pcs_readb(void __iomem *reg)
> +static unsigned pcs_read(struct regmap *map, unsigned int reg)
>  {
> -	return readb(reg);
> -}
> +	unsigned int val;
>  
> -static unsigned __maybe_unused pcs_readw(void __iomem *reg)
> -{
> -	return readw(reg);
> -}
> -
> -static unsigned __maybe_unused pcs_readl(void __iomem *reg)
> -{
> -	return readl(reg);
> -}
> -
> -static void __maybe_unused pcs_writeb(unsigned val, void __iomem *reg)
> -{
> -	writeb(val, reg);
> -}
> +	regmap_read(map, reg, &val);

Sorry this won't work. Most platforms don't need regmap here, and I
certainly don't want to use regmap for toggling pins for runtime
PM because of the extra overhead.

It seems you need to stash the regmap pointer to struct pcs_device
and just the function pointers. As this driver is ioremapping the
region, we certainly want to keep things using void __iomem * too.
You can cast that to whatever regmap needs in the wrapper functions
for regmap. Note that the extra overhead there won't matter as we
are using regmap mostly for devices over I2C and so on.

Regards,

Tony
Vaibhav Hiremath July 6, 2015, 12:02 p.m. UTC | #2
On Monday 06 July 2015 12:05 PM, Tony Lindgren wrote:
> * Vaibhav Hiremath <vaibhav.hiremath@linaro.org> [150702 09:58]:
>> --- a/drivers/pinctrl/pinctrl-single.c
>> +++ b/drivers/pinctrl/pinctrl-single.c
>>
>> -static unsigned __maybe_unused pcs_readb(void __iomem *reg)
>> +static unsigned pcs_read(struct regmap *map, unsigned int reg)
>>   {
>> -	return readb(reg);
>> -}
>> +	unsigned int val;
>>
>> -static unsigned __maybe_unused pcs_readw(void __iomem *reg)
>> -{
>> -	return readw(reg);
>> -}
>> -
>> -static unsigned __maybe_unused pcs_readl(void __iomem *reg)
>> -{
>> -	return readl(reg);
>> -}
>> -
>> -static void __maybe_unused pcs_writeb(unsigned val, void __iomem *reg)
>> -{
>> -	writeb(val, reg);
>> -}
>> +	regmap_read(map, reg, &val);
>
> Sorry this won't work. Most platforms don't need regmap here, and I
> certainly don't want to use regmap for toggling pins for runtime
> PM because of the extra overhead.
>

That's exactly my question was in my first email. It's ok.

What is your openion on overall code changes for regmap support ?
Any other feedback or suggestions?

> It seems you need to stash the regmap pointer to struct pcs_device
> and just the function pointers. As this driver is ioremapping the
> region, we certainly want to keep things using void __iomem * too.
> You can cast that to whatever regmap needs in the wrapper functions
> for regmap. Note that the extra overhead there won't matter as we
> are using regmap mostly for devices over I2C and so on.
>

The issue I have here with the signature of read/write fn

static unsigned __maybe_unused pcs_read(void __iomem *reg)
static void __maybe_unused pcs_writeX(unsigned val, void __iomem *reg)


For regmap, I need 2 arguments,

1. Pointer to regmap
2. Offset to register


So I will have to change the signature to

static unsigned __maybe_unused pcs_read(void __iomem *reg, unsigned int 
offset)
static void __maybe_unused pcs_write(void __iomem *reg, unsigned val, 
unsigned int offset)


And,
On the same direction, will having separate functions for regmap.

static unsigned pcs_read_regmap(void __iomem *reg, unsigned int offset)
{
	unsigned int val;

	regmap_read((struct regmap *)reg, offset, &val);
}

static void pcs_write_regmap(void __iomem *reg, unsigned val, unsigned 
int offset)
{
        regmap_write((struct regmap *)reg, offset, val);
  }


This functions will be initialized to pcs_device->read/write.

I will have to do some more changes, specially around pcs_interrupt
usage.
Tony Lindgren July 9, 2015, 9:10 a.m. UTC | #3
* Vaibhav Hiremath <vaibhav.hiremath@linaro.org> [150706 05:05]:
> On Monday 06 July 2015 12:05 PM, Tony Lindgren wrote:
> >
> >Sorry this won't work. Most platforms don't need regmap here, and I
> >certainly don't want to use regmap for toggling pins for runtime
> >PM because of the extra overhead.
> >
> 
> That's exactly my question was in my first email. It's ok.
> 
> What is your openion on overall code changes for regmap support ?
> Any other feedback or suggestions?

Seems it should work just fine once you get the IO functions
configured :)
 
> >It seems you need to stash the regmap pointer to struct pcs_device
> >and just the function pointers. As this driver is ioremapping the
> >region, we certainly want to keep things using void __iomem * too.
> >You can cast that to whatever regmap needs in the wrapper functions
> >for regmap. Note that the extra overhead there won't matter as we
> >are using regmap mostly for devices over I2C and so on.
> >
> 
> The issue I have here with the signature of read/write fn
> 
> static unsigned __maybe_unused pcs_read(void __iomem *reg)
> static void __maybe_unused pcs_writeX(unsigned val, void __iomem *reg)
> 
> 
> For regmap, I need 2 arguments,
> 
> 1. Pointer to regmap
> 2. Offset to register
> 
> 
> So I will have to change the signature to
> 
> static unsigned __maybe_unused pcs_read(void __iomem *reg, unsigned int
> offset)
> static void __maybe_unused pcs_write(void __iomem *reg, unsigned val,
> unsigned int offset)
> 
> 
> And,
> On the same direction, will having separate functions for regmap.
> 
> static unsigned pcs_read_regmap(void __iomem *reg, unsigned int offset)
> {
> 	unsigned int val;
> 
> 	regmap_read((struct regmap *)reg, offset, &val);
> }
> 
> static void pcs_write_regmap(void __iomem *reg, unsigned val, unsigned int
> offset)
> {
>        regmap_write((struct regmap *)reg, offset, val);
>  }

OK yeah that should work.
 
> This functions will be initialized to pcs_device->read/write.
> 
> I will have to do some more changes, specially around pcs_interrupt
> usage.

OK I suggest a separate patch to add support for interrupts.

Regards,

Tony
Linus Walleij July 16, 2015, 12:58 p.m. UTC | #4
On Thu, Jul 2, 2015 at 6:53 PM, Vaibhav Hiremath
<vaibhav.hiremath@linaro.org> wrote:

> In some usecases, the external device (in my case it PMIC over I2C)
> does support pin in multiple configuration, we may need to control/configure them
> during boot or runtime.

What is missing from this patch is an explanation why pinctrl-single should
be used for this PMIC.

Repeat: pinctrl-single: when you have exactly one register per pin, and
the description of the pins is delivered in an opaque ASIC-specific format
without developers knowing much about how the hardware actually works,
just "set these magic values".

I strongly prefer that this PMIC has its own pin controller using standard
bindings with groups and functions, see eg. drivers/pinctrl/nomadik/pinctrl-ab*
for a PMIC pinctrl driver.

Yours,
Linus Walleij
Vaibhav Hiremath July 16, 2015, 2:16 p.m. UTC | #5
On Thursday 16 July 2015 06:28 PM, Linus Walleij wrote:
> On Thu, Jul 2, 2015 at 6:53 PM, Vaibhav Hiremath
> <vaibhav.hiremath@linaro.org> wrote:
>
>> In some usecases, the external device (in my case it PMIC over I2C)
>> does support pin in multiple configuration, we may need to control/configure them
>> during boot or runtime.
>
> What is missing from this patch is an explanation why pinctrl-single should
> be used for this PMIC.
>
> Repeat: pinctrl-single: when you have exactly one register per pin, and
> the description of the pins is delivered in an opaque ASIC-specific format
> without developers knowing much about how the hardware actually works,
> just "set these magic values".
>
> I strongly prefer that this PMIC has its own pin controller using standard
> bindings with groups and functions, see eg. drivers/pinctrl/nomadik/pinctrl-ab*
> for a PMIC pinctrl driver.
>

Thanks for the reference, good to know this.
Let me check this driver before commenting anything further on this.

Thanks,
Vaibhav

> Yours,
> Linus Walleij
>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/marvell/pxa1928-helium.dts b/arch/arm64/boot/dts/marvell/pxa1928-helium.dts
index 91b7a1a..25967a6 100644
--- a/arch/arm64/boot/dts/marvell/pxa1928-helium.dts
+++ b/arch/arm64/boot/dts/marvell/pxa1928-helium.dts
@@ -138,6 +138,8 @@ 
 				status = "okay";
 				pmic1: 88pm860@30 {
 					compatible = "marvell,88pm800";
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio0_32khz_pins>;
 					reg = <0x30>;
 					interrupts = <0 77 0x4>;
 					interrupt-parent = <&gic>;
@@ -319,6 +321,19 @@ 
 							regulator-max-microvolt = <2800000>;
 						};
 					};
+					pinctrl-i2c {
+						compatible = "pinctrl-i2c";
+						status = "okay";
+
+						pinctrl-single,size = <0xff>;
+						pinctrl-single,function-mask = <0xff>;
+						pinctrl-single,register-width = <8>;
+
+						gpio0_32khz_pins: pinmux_gpio0_32khz_pins {
+							pinctrl-single,pins = <0x30 0x8>;
+						};
+
+					};
 					rtc {
 						compatible = "marvell,88pm80x-rtc";
 						status = "okay";
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index ae2fbbd..3ca381e 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -128,6 +128,14 @@  static const struct of_device_id pm80x_of_match_table[] = {
 	{},
 };
 
+static struct mfd_cell pinctrl_devs[] = {
+	{
+	 .name = "pinctrl-i2c",
+	 .of_compatible = "pinctrl-i2c",
+	 .id = -1,
+	 },
+};
+
 static struct resource rtc_resources[] = {
 	{
 	 .name = "88pm80x-rtc",
@@ -338,6 +346,21 @@  static int device_onkey_init(struct pm80x_chip *chip,
 	return 0;
 }
 
+static int device_pinctrl_init(struct pm80x_chip *chip,
+					   struct pm80x_platform_data *pdata)
+{
+	int ret;
+
+	ret = mfd_add_devices(chip->dev, 0, &pinctrl_devs[0],
+			      ARRAY_SIZE(pinctrl_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(chip->dev, "Failed to add pinctrl subdev\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int device_rtc_init(struct pm80x_chip *chip,
 				struct pm80x_platform_data *pdata)
 {
@@ -602,6 +625,12 @@  static int device_800_init(struct pm80x_chip *chip,
 		goto out_dev;
 	}
 
+	ret = device_pinctrl_init(chip, pdata);
+	if (ret) {
+		dev_err(chip->dev, "Failed to add pinctrl subdev\n");
+		goto out;
+	}
+
 	ret = device_rtc_init(chip, pdata);
 	if (ret) {
 		dev_err(chip->dev, "Failed to add rtc subdev\n");
@@ -751,6 +780,8 @@  static int pm800_probe(struct i2c_client *client,
 	struct pm80x_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct device_node *np = client->dev.of_node;
 	struct pm80x_subchip *subchip;
+	struct pinctrl *p;
+	struct pinctrl_state *state_default;
 
 	if (!pdata && !np) {
 		dev_err(&client->dev,
@@ -775,6 +806,7 @@  static int pm800_probe(struct i2c_client *client,
 
 	chip = i2c_get_clientdata(client);
 
+	printk("%s:%d chip->regmap - %x\n", __func__, __LINE__, chip->regmap);
 	/* init subchip for PM800 */
 	subchip =
 	    devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip),
@@ -811,6 +843,15 @@  static int pm800_probe(struct i2c_client *client,
 		goto err_device_init;
 	}
 
+	p = devm_pinctrl_get(&client->dev);
+	if (p) {
+		state_default = pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT);
+		if (IS_ERR(state_default))
+			dev_info(&client->dev, "missing default pinctrl state\n");
+		else
+			pinctrl_select_state(p, state_default);
+	}
+
 	/* System reboot notifier and shutdown callback */
 	chip->reboot_notifier.notifier_call = reboot_notifier_fn;
 	register_reboot_notifier(&(chip->reboot_notifier));
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index b2de09d..26042df 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -16,6 +16,7 @@ 
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
+#include <linux/regmap.h>
 
 #include <linux/irqchip/chained_irq.h>
 
@@ -61,7 +62,7 @@  struct pcs_pingroup {
  * @val:	register value
  */
 struct pcs_func_vals {
-	void __iomem *reg;
+	unsigned int reg;
 	unsigned val;
 	unsigned mask;
 };
@@ -236,6 +237,8 @@  struct pcs_device {
 	unsigned ngroups;
 	unsigned nfuncs;
 	struct pinctrl_desc desc;
+	struct regmap *regmap;
+	struct regmap_config regmap_config;
 	unsigned (*read)(void __iomem *reg);
 	void (*write)(unsigned val, void __iomem *reg);
 };
@@ -263,34 +266,18 @@  static enum pin_config_param pcs_bias[] = {
  * does not help in this case.
  */
 
-static unsigned __maybe_unused pcs_readb(void __iomem *reg)
+static unsigned pcs_read(struct regmap *map, unsigned int reg)
 {
-	return readb(reg);
-}
+	unsigned int val;
 
-static unsigned __maybe_unused pcs_readw(void __iomem *reg)
-{
-	return readw(reg);
-}
-
-static unsigned __maybe_unused pcs_readl(void __iomem *reg)
-{
-	return readl(reg);
-}
-
-static void __maybe_unused pcs_writeb(unsigned val, void __iomem *reg)
-{
-	writeb(val, reg);
-}
+	regmap_read(map, reg, &val);
 
-static void __maybe_unused pcs_writew(unsigned val, void __iomem *reg)
-{
-	writew(val, reg);
+	return val;
 }
 
-static void __maybe_unused pcs_writel(unsigned val, void __iomem *reg)
+static void pcs_write(struct regmap *map, unsigned val, unsigned int reg)
 {
-	writel(val, reg);
+	regmap_write(map, reg, val);
 }
 
 static int pcs_get_groups_count(struct pinctrl_dev *pctldev)
@@ -351,7 +338,7 @@  static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
 	pcs = pinctrl_dev_get_drvdata(pctldev);
 
 	mux_bytes = pcs->width / BITS_PER_BYTE;
-	val = pcs->read(pcs->base + pin * mux_bytes);
+	val = pcs_read(pcs->regmap, pin * mux_bytes);
 
 	seq_printf(s, "%08x %s " , val, DRIVER_NAME);
 }
@@ -472,7 +459,7 @@  static int pcs_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
 
 		vals = &func->vals[i];
 		raw_spin_lock_irqsave(&pcs->lock, flags);
-		val = pcs->read(vals->reg);
+		val = pcs_read(pcs->regmap, vals->reg);
 
 		if (pcs->bits_per_mux)
 			mask = vals->mask;
@@ -481,7 +468,7 @@  static int pcs_set_mux(struct pinctrl_dev *pctldev, unsigned fselector,
 
 		val &= ~mask;
 		val |= (vals->val & mask);
-		pcs->write(val, vals->reg);
+		pcs_write(pcs->regmap, val, vals->reg);
 		raw_spin_unlock_irqrestore(&pcs->lock, flags);
 	}
 
@@ -507,9 +494,9 @@  static int pcs_request_gpio(struct pinctrl_dev *pctldev,
 			|| pin < frange->offset)
 			continue;
 		mux_bytes = pcs->width / BITS_PER_BYTE;
-		data = pcs->read(pcs->base + pin * mux_bytes) & ~pcs->fmask;
+		data = pcs_read(pcs->regmap, pin * mux_bytes) & ~pcs->fmask;
 		data |= frange->gpiofunc;
-		pcs->write(data, pcs->base + pin * mux_bytes);
+		pcs_write(pcs->regmap, data, pin * mux_bytes);
 		break;
 	}
 	return 0;
@@ -579,7 +566,7 @@  static int pcs_pinconf_get(struct pinctrl_dev *pctldev,
 		}
 
 		offset = pin * (pcs->width / BITS_PER_BYTE);
-		data = pcs->read(pcs->base + offset) & func->conf[i].mask;
+		data = pcs_read(pcs->regmap, offset) & func->conf[i].mask;
 		switch (func->conf[i].param) {
 		/* 4 parameters */
 		case PIN_CONFIG_BIAS_PULL_DOWN:
@@ -637,7 +624,7 @@  static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
 				continue;
 
 			offset = pin * (pcs->width / BITS_PER_BYTE);
-			data = pcs->read(pcs->base + offset);
+			data = pcs_read(pcs->regmap, offset);
 			arg = pinconf_to_config_argument(configs[j]);
 			switch (func->conf[i].param) {
 			/* 2 parameters */
@@ -668,7 +655,7 @@  static int pcs_pinconf_set(struct pinctrl_dev *pctldev,
 			default:
 				return -ENOTSUPP;
 			}
-			pcs->write(data, pcs->base + offset);
+			pcs_write(pcs->regmap, data, offset);
 
 			break;
 		}
@@ -757,6 +744,7 @@  static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
 	struct pcs_soc_data *pcs_soc = &pcs->socdata;
 	struct pinctrl_pin_desc *pin;
 	struct pcs_name *pn;
+	resource_size_t start = 0;
 	int i;
 
 	i = pcs->pins.cur;
@@ -766,22 +754,25 @@  static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
 		return -ENOMEM;
 	}
 
+	if (pcs->res)
+		start = pcs->res->start;
+
 	if (pcs_soc->irq_enable_mask) {
 		unsigned val;
 
-		val = pcs->read(pcs->base + offset);
+		val = pcs_read(pcs->regmap, offset);
 		if (val & pcs_soc->irq_enable_mask) {
 			dev_dbg(pcs->dev, "irq enabled at boot for pin at %lx (%x), clearing\n",
-				(unsigned long)pcs->res->start + offset, val);
+				(unsigned long)start + offset, val);
 			val &= ~pcs_soc->irq_enable_mask;
-			pcs->write(val, pcs->base + offset);
+			pcs_write(pcs->regmap, val, offset);
 		}
 	}
 
 	pin = &pcs->pins.pa[i];
 	pn = &pcs->names[i];
 	sprintf(pn->name, "%lx.%u",
-		(unsigned long)pcs->res->start + offset, pin_pos);
+		(unsigned long)start + offset, pin_pos);
 	pin->name = pn->name;
 	pin->number = i;
 	pcs->pins.cur++;
@@ -1168,7 +1159,7 @@  static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs,
 
 		offset = be32_to_cpup(mux + index++);
 		val = be32_to_cpup(mux + index++);
-		vals[found].reg = pcs->base + offset;
+		vals[found].reg = offset;
 		vals[found].val = val;
 
 		pin = pcs_get_pin_by_offset(pcs, offset);
@@ -1296,7 +1287,7 @@  static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs,
 			}
 
 			vals[found].mask = submask;
-			vals[found].reg = pcs->base + offset;
+			vals[found].reg = offset;
 			vals[found].val = val_pos;
 
 			pin = pcs_get_pin_by_offset(pcs, offset);
@@ -1540,7 +1531,7 @@  static int pcs_add_gpio_func(struct device_node *node, struct pcs_device *pcs)
  * @node:	list node
  */
 struct pcs_interrupt {
-	void __iomem *reg;
+	unsigned int reg;
 	irq_hw_number_t hwirq;
 	unsigned int irq;
 	struct list_head node;
@@ -1570,12 +1561,12 @@  static inline void pcs_irq_set(struct pcs_soc_data *pcs_soc,
 
 		soc_mask = pcs_soc->irq_enable_mask;
 		raw_spin_lock(&pcs->lock);
-		mask = pcs->read(pcswi->reg);
+		mask = pcs_read(pcs->regmap, pcswi->reg);
 		if (enable)
 			mask |= soc_mask;
 		else
 			mask &= ~soc_mask;
-		pcs->write(mask, pcswi->reg);
+		pcs_write(pcs->regmap, mask, pcswi->reg);
 		raw_spin_unlock(&pcs->lock);
 	}
 
@@ -1644,7 +1635,7 @@  static int pcs_irq_handle(struct pcs_soc_data *pcs_soc)
 
 		pcswi = list_entry(pos, struct pcs_interrupt, node);
 		raw_spin_lock(&pcs->lock);
-		mask = pcs->read(pcswi->reg);
+		mask = pcs_read(pcs->regmap, pcswi->reg);
 		raw_spin_unlock(&pcs->lock);
 		if (mask & pcs_soc->irq_status_mask) {
 			generic_handle_irq(irq_find_mapping(pcs->domain,
@@ -1705,7 +1696,7 @@  static int pcs_irqdomain_map(struct irq_domain *d, unsigned int irq,
 	if (!pcswi)
 		return -ENOMEM;
 
-	pcswi->reg = pcs->base + hwirq;
+	pcswi->reg = hwirq;
 	pcswi->hwirq = hwirq;
 	pcswi->irq = irq;
 
@@ -1835,6 +1826,7 @@  static int pcs_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "could not allocate\n");
 		return -ENOMEM;
 	}
+
 	pcs->dev = &pdev->dev;
 	raw_spin_lock_init(&pcs->lock);
 	mutex_init(&pcs->mutex);
@@ -1868,47 +1860,63 @@  static int pcs_probe(struct platform_device *pdev)
 	pcs->bits_per_mux = of_property_read_bool(np,
 						  "pinctrl-single,bit-per-mux");
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(pcs->dev, "could not get resource\n");
-		return -ENODEV;
-	}
+	if (of_device_is_compatible(np, "pinctrl-i2c")) {
+		pcs->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 
-	pcs->res = devm_request_mem_region(pcs->dev, res->start,
-			resource_size(res), DRIVER_NAME);
-	if (!pcs->res) {
-		dev_err(pcs->dev, "could not get mem_region\n");
-		return -EBUSY;
-	}
+		PCS_GET_PROP_U32("pinctrl-single,size", &pcs->size,
+			 "size not specified\n");
+;
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res) {
+			dev_err(pcs->dev, "could not get resource\n");
+			return -ENODEV;
+		}
+
+		pcs->res = devm_request_mem_region(pcs->dev, res->start,
+				resource_size(res), DRIVER_NAME);
+		if (!pcs->res) {
+			dev_err(pcs->dev, "could not get mem_region\n");
+			return -EBUSY;
+		}
+
+		pcs->size = resource_size(pcs->res);
+		pcs->base = devm_ioremap(pcs->dev, pcs->res->start, pcs->size);
+		if (!pcs->base) {
+			dev_err(pcs->dev, "could not ioremap\n");
+			return -ENODEV;
+		}
+
+		switch (pcs->width) {
+			case 8:
+				pcs->regmap_config.reg_bits = 8;
+				pcs->regmap_config.val_bits = 8;
+				pcs->regmap_config.reg_stride = 1;
+				break;
+			case 16:
+				pcs->regmap_config.reg_bits = 16;
+				pcs->regmap_config.val_bits = 16;
+				pcs->regmap_config.reg_stride = 2;
+				break;
+			case 32:
+				pcs->regmap_config.reg_bits = 32;
+				pcs->regmap_config.val_bits = 32;
+				pcs->regmap_config.reg_stride = 4;
+				break;
+			default:
+				break;
+		}
+
+		pcs->regmap = regmap_init_mmio(&pdev->dev, pcs->base, &pcs->regmap_config);
 
-	pcs->size = resource_size(pcs->res);
-	pcs->base = devm_ioremap(pcs->dev, pcs->res->start, pcs->size);
-	if (!pcs->base) {
-		dev_err(pcs->dev, "could not ioremap\n");
-		return -ENODEV;
 	}
 
+	printk("%s:%d: regmap - %x size - %d\n", __func__ , __LINE__, pcs->regmap, pcs->size);
+
 	INIT_RADIX_TREE(&pcs->pgtree, GFP_KERNEL);
 	INIT_RADIX_TREE(&pcs->ftree, GFP_KERNEL);
 	platform_set_drvdata(pdev, pcs);
 
-	switch (pcs->width) {
-	case 8:
-		pcs->read = pcs_readb;
-		pcs->write = pcs_writeb;
-		break;
-	case 16:
-		pcs->read = pcs_readw;
-		pcs->write = pcs_writew;
-		break;
-	case 32:
-		pcs->read = pcs_readl;
-		pcs->write = pcs_writel;
-		break;
-	default:
-		break;
-	}
-
 	pcs->desc.name = DRIVER_NAME;
 	pcs->desc.pctlops = &pcs_pinctrl_ops;
 	pcs->desc.pmxops = &pcs_pinmux_ops;
@@ -2008,6 +2016,7 @@  static const struct of_device_id pcs_of_match[] = {
 	{ .compatible = "ti,am437-padconf", .data = &pinctrl_single_am437x },
 	{ .compatible = "pinctrl-single", .data = &pinctrl_single },
 	{ .compatible = "pinconf-single", .data = &pinconf_single },
+	{ .compatible = "pinctrl-i2c", .data = &pinctrl_single },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, pcs_of_match);