| Message ID | 036f143509fed3f303508d1688d68012790f835a.1437569902.git.cyrille.pitchen@atmel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wednesday, July 22, 2015 at 03:17:06 PM, Cyrille Pitchen wrote: > Once the Quad SPI mode has been enabled on a Micron flash memory, this > device expects ALL the following commands to use the SPI 4-4-4 protocol. > The (Q)SPI controller needs to be notified about the protocol change so it > can adapt and keep on dialoging with the Micron memory. > > Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> > --- > drivers/mtd/spi-nor/spi-nor.c | 17 +++++++++++++++++ > include/linux/mtd/spi-nor.h | 13 +++++++++++++ > 2 files changed, 30 insertions(+) > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index d78831b4422b..93627d4e6be8 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -163,6 +163,18 @@ static inline int write_disable(struct spi_nor *nor) > return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); > } > > +/* > + * Notify the (Q)SPI controller about the new protocol to be used. Hi! Can you please just reword this a little, so that it is absolutelly clear even to the less bright of us (like me) that this is a notification coming from the upper layers (ie. the spi-nor framework) toward the hardware ? > + */ > +static inline int spi_nor_set_protocol(struct spi_nor *nor, > + enum spi_protocol proto) > +{ > + if (nor->set_protocol) > + return nor->set_protocol(nor, proto); > + > + return 0; > +} > + > static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) > { > return mtd->priv; [...] Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Marek, Le 22/07/2015 15:41, Marek Vasut a écrit : > On Wednesday, July 22, 2015 at 03:17:06 PM, Cyrille Pitchen wrote: >> Once the Quad SPI mode has been enabled on a Micron flash memory, this >> device expects ALL the following commands to use the SPI 4-4-4 protocol. >> The (Q)SPI controller needs to be notified about the protocol change so it >> can adapt and keep on dialoging with the Micron memory. >> >> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> >> --- >> drivers/mtd/spi-nor/spi-nor.c | 17 +++++++++++++++++ >> include/linux/mtd/spi-nor.h | 13 +++++++++++++ >> 2 files changed, 30 insertions(+) >> >> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c >> index d78831b4422b..93627d4e6be8 100644 >> --- a/drivers/mtd/spi-nor/spi-nor.c >> +++ b/drivers/mtd/spi-nor/spi-nor.c >> @@ -163,6 +163,18 @@ static inline int write_disable(struct spi_nor *nor) >> return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); >> } >> >> +/* >> + * Notify the (Q)SPI controller about the new protocol to be used. > > Hi! > > Can you please just reword this a little, so that it is absolutelly clear > even to the less bright of us (like me) that this is a notification coming > from the upper layers (ie. the spi-nor framework) toward the hardware ? > Sure, no problem! what about the following? /* * Let the spi-nor framework notify lower layers, especially the driver of the * (Q)SPI controller, about the new protocol to be used. Indeed, once the * spi-nor framework has sent manufacturer specific commands to a memory to * enable its Quad SPI mode, it should immediately after tell the QSPI * controller to use the very same Quad SPI protocol as expected by the memory. */ >> + */ >> +static inline int spi_nor_set_protocol(struct spi_nor *nor, >> + enum spi_protocol proto) >> +{ >> + if (nor->set_protocol) >> + return nor->set_protocol(nor, proto); >> + >> + return 0; >> +} >> + >> static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) >> { >> return mtd->priv; > > [...] > > Best regards, > Marek Vasut > Best regards, Cyrille -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday, July 22, 2015 at 06:25:20 PM, Cyrille Pitchen wrote: > Hi Marek, > > Le 22/07/2015 15:41, Marek Vasut a écrit : > > On Wednesday, July 22, 2015 at 03:17:06 PM, Cyrille Pitchen wrote: > >> Once the Quad SPI mode has been enabled on a Micron flash memory, this > >> device expects ALL the following commands to use the SPI 4-4-4 protocol. > >> The (Q)SPI controller needs to be notified about the protocol change so > >> it can adapt and keep on dialoging with the Micron memory. > >> > >> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> > >> --- > >> > >> drivers/mtd/spi-nor/spi-nor.c | 17 +++++++++++++++++ > >> include/linux/mtd/spi-nor.h | 13 +++++++++++++ > >> 2 files changed, 30 insertions(+) > >> > >> diff --git a/drivers/mtd/spi-nor/spi-nor.c > >> b/drivers/mtd/spi-nor/spi-nor.c index d78831b4422b..93627d4e6be8 100644 > >> --- a/drivers/mtd/spi-nor/spi-nor.c > >> +++ b/drivers/mtd/spi-nor/spi-nor.c > >> @@ -163,6 +163,18 @@ static inline int write_disable(struct spi_nor > >> *nor) > >> > >> return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); > >> > >> } > >> > >> +/* > >> + * Notify the (Q)SPI controller about the new protocol to be used. > > > > Hi! > > > > Can you please just reword this a little, so that it is absolutelly clear > > even to the less bright of us (like me) that this is a notification > > coming from the upper layers (ie. the spi-nor framework) toward the > > hardware ? > > Sure, no problem! what about the following? > > /* > * Let the spi-nor framework notify lower layers, especially the driver of > the * (Q)SPI controller, about the new protocol to be used. Indeed, once > the * spi-nor framework has sent manufacturer specific commands to a > memory to * enable its Quad SPI mode, it should immediately after tell the > QSPI * controller to use the very same Quad SPI protocol as expected by > the memory. */ Sure, excellent, thanks ! :-) -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index d78831b4422b..93627d4e6be8 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -163,6 +163,18 @@ static inline int write_disable(struct spi_nor *nor) return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0, 0); } +/* + * Notify the (Q)SPI controller about the new protocol to be used. + */ +static inline int spi_nor_set_protocol(struct spi_nor *nor, + enum spi_protocol proto) +{ + if (nor->set_protocol) + return nor->set_protocol(nor, proto); + + return 0; +} + static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) { return mtd->priv; @@ -943,6 +955,11 @@ static int micron_quad_enable(struct spi_nor *nor) return ret; } + /* switch protocol to Quad CMD 4-4-4 */ + ret = spi_nor_set_protocol(nor, SPI_PROTO_4_4_4); + if (ret) + return ret; + ret = spi_nor_wait_till_ready(nor); if (ret) return ret; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index e5409524bb0a..1bf6f11310ef 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -87,6 +87,16 @@ enum read_mode { SPI_NOR_QUAD, }; +enum spi_protocol { + SPI_PROTO_1_1_1, /* SPI */ + SPI_PROTO_1_1_2, /* Dual Output */ + SPI_PROTO_1_1_4, /* Quad Output */ + SPI_PROTO_1_2_2, /* Dual IO */ + SPI_PROTO_1_4_4, /* Quad IO */ + SPI_PROTO_2_2_2, /* Dual Command */ + SPI_PROTO_4_4_4, /* Quad Command */ +}; + /** * struct spi_nor_xfer_cfg - Structure for defining a Serial Flash transfer * @wren: command for "Write Enable", or 0x00 for not required @@ -149,6 +159,7 @@ enum spi_nor_option_flags { * read/write/erase/lock/unlock operations * @read_xfer: [OPTIONAL] the read fundamental primitive * @write_xfer: [OPTIONAL] the writefundamental primitive + * @set_protocol: [OPTIONAL] notify about protocol change * @read_reg: [DRIVER-SPECIFIC] read out the register * @write_reg: [DRIVER-SPECIFIC] write data to the register * @read: [DRIVER-SPECIFIC] read data from the SPI NOR @@ -185,6 +196,8 @@ struct spi_nor { int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len, int write_enable); + int (*set_protocol)(struct spi_nor *nor, enum spi_protocol proto); + int (*read)(struct spi_nor *nor, loff_t from, size_t len, size_t *retlen, u_char *read_buf); void (*write)(struct spi_nor *nor, loff_t to,
Once the Quad SPI mode has been enabled on a Micron flash memory, this device expects ALL the following commands to use the SPI 4-4-4 protocol. The (Q)SPI controller needs to be notified about the protocol change so it can adapt and keep on dialoging with the Micron memory. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> --- drivers/mtd/spi-nor/spi-nor.c | 17 +++++++++++++++++ include/linux/mtd/spi-nor.h | 13 +++++++++++++ 2 files changed, 30 insertions(+)