| Message ID | 63bed3ee9ee4211df15d11becf1f78824e640a82.1437058481.git.maitysanchayan@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jul 16, 2015 at 08:43:20PM +0530, Sanchayan Maity wrote: > Add device tree node for touchscreen support on Colibri VF50. The > touchscreen functionality on VF50 uses the ADC channels of Vybrid > and some GPIOs. Also add pinctrl nodes for proper pinmux. > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> > --- > arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 4 +++ > arch/arm/boot/dts/vf500-colibri.dtsi | 46 +++++++++++++++++++++++++++++ > 2 files changed, 50 insertions(+) > > diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > index 7fc782c..c5efb57 100644 > --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > @@ -15,3 +15,7 @@ > model = "Toradex Colibri VF50 on Colibri Evaluation Board"; > compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; > }; > + > +&touchctrl { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi > index cee34a3..7cbe341 100644 > --- a/arch/arm/boot/dts/vf500-colibri.dtsi > +++ b/arch/arm/boot/dts/vf500-colibri.dtsi > @@ -17,4 +17,50 @@ > memory { > reg = <0x80000000 0x8000000>; > }; > + > + touchctrl: vf50_touchctrl { Minus rather than underscore should be used in node name. And node name should be generic. "touchscreen" might be a good choice. Shawn > + compatible = "toradex,vf50-touchctrl"; > + io-channels = <&adc1 0>,<&adc0 0>, > + <&adc0 1>,<&adc1 2>; > + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; > + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; > + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; > + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; > + pen-detect-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; > + pen-pullup-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "idle","default","gpios"; > + pinctrl-0 = <&pinctrl_touchctrl_idle>; > + pinctrl-1 = <&pinctrl_touchctrl_default>; > + pinctrl-2 = <&pinctrl_touchctrl_gpios>; > + status = "disabled"; > + }; > +}; > + > +&iomuxc { > + vf610-colibri { > + pinctrl_touchctrl_idle: touchctrl_idle { > + fsl,pins = < > + VF610_PAD_PTA18__GPIO_8 0x206d > + VF610_PAD_PTA19__GPIO_9 0x206d > + >; > + }; > + > + pinctrl_touchctrl_default: touchctrl_default { > + fsl,pins = < > + VF610_PAD_PTA18__ADC0_SE0 0x2060 > + VF610_PAD_PTA19__ADC0_SE1 0x2060 > + VF610_PAD_PTA16__ADC1_SE0 0x2060 > + VF610_PAD_PTB2__ADC1_SE2 0x2060 > + >; > + }; > + > + pinctrl_touchctrl_gpios: touchctrl_gpios { > + fsl,pins = < > + VF610_PAD_PTA23__GPIO_13 0x22e9 > + VF610_PAD_PTB23__GPIO_93 0x22e9 > + VF610_PAD_PTA22__GPIO_12 0x22e9 > + VF610_PAD_PTA11__GPIO_4 0x22e9 > + >; > + }; > + }; > }; > -- > 2.4.6 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index 7fc782c..c5efb57 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -15,3 +15,7 @@ model = "Toradex Colibri VF50 on Colibri Evaluation Board"; compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; }; + +&touchctrl { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index cee34a3..7cbe341 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -17,4 +17,50 @@ memory { reg = <0x80000000 0x8000000>; }; + + touchctrl: vf50_touchctrl { + compatible = "toradex,vf50-touchctrl"; + io-channels = <&adc1 0>,<&adc0 0>, + <&adc0 1>,<&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + pen-detect-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + pen-pullup-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "idle","default","gpios"; + pinctrl-0 = <&pinctrl_touchctrl_idle>; + pinctrl-1 = <&pinctrl_touchctrl_default>; + pinctrl-2 = <&pinctrl_touchctrl_gpios>; + status = "disabled"; + }; +}; + +&iomuxc { + vf610-colibri { + pinctrl_touchctrl_idle: touchctrl_idle { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x206d + VF610_PAD_PTA19__GPIO_9 0x206d + >; + }; + + pinctrl_touchctrl_default: touchctrl_default { + fsl,pins = < + VF610_PAD_PTA18__ADC0_SE0 0x2060 + VF610_PAD_PTA19__ADC0_SE1 0x2060 + VF610_PAD_PTA16__ADC1_SE0 0x2060 + VF610_PAD_PTB2__ADC1_SE2 0x2060 + >; + }; + + pinctrl_touchctrl_gpios: touchctrl_gpios { + fsl,pins = < + VF610_PAD_PTA23__GPIO_13 0x22e9 + VF610_PAD_PTB23__GPIO_93 0x22e9 + VF610_PAD_PTA22__GPIO_12 0x22e9 + VF610_PAD_PTA11__GPIO_4 0x22e9 + >; + }; + }; };
Add device tree node for touchscreen support on Colibri VF50. The touchscreen functionality on VF50 uses the ADC channels of Vybrid and some GPIOs. Also add pinctrl nodes for proper pinmux. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> --- arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 4 +++ arch/arm/boot/dts/vf500-colibri.dtsi | 46 +++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+)