| Message ID | 1438354602-6361-3-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Jul 31, 2015 at 10:56:42PM +0800, Chen-Yu Tsai wrote: > Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and > sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > arch/arm/configs/multi_v7_defconfig | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index 5fd8df6f50ea..5eaf39ce134e 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -301,6 +301,7 @@ CONFIG_I2C_S3C2410=y > CONFIG_I2C_SH_MOBILE=y > CONFIG_I2C_SIRF=y > CONFIG_I2C_ST=y > +CONFIG_I2C_SUN6I_P2WI=y > CONFIG_I2C_TEGRA=y > CONFIG_I2C_XILINX=y > CONFIG_I2C_RCAR=y > @@ -587,6 +588,7 @@ CONFIG_IMX_DMA=y > CONFIG_MXS_DMA=y > CONFIG_DMA_OMAP=y > CONFIG_XILINX_VDMA=y > +CONFIG_DMA_SUN6I=y > CONFIG_STAGING=y > CONFIG_SENSORS_ISL29018=y > CONFIG_SENSORS_ISL29028=y > @@ -612,6 +614,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y > CONFIG_PM_DEVFREQ=y > CONFIG_ARM_TEGRA_DEVFREQ=m > CONFIG_MEMORY=y > +CONFIG_EXTCON=y > CONFIG_TI_AEMIF=y > CONFIG_IIO=y > CONFIG_AT91_ADC=m > @@ -622,6 +625,7 @@ CONFIG_PWM_ATMEL=m > CONFIG_PWM_ATMEL_TCB=m > CONFIG_PWM_RENESAS_TPU=y > CONFIG_PWM_SAMSUNG=m > +CONFIG_PWM_SUN4I=y > CONFIG_PWM_TEGRA=y > CONFIG_PWM_VT8500=y > CONFIG_PHY_HIX5HD2_SATA=y > @@ -660,6 +664,7 @@ CONFIG_LOCKUP_DETECTOR=y > CONFIG_CRYPTO_DEV_TEGRA_AES=y > CONFIG_CPUFREQ_DT=y > CONFIG_KEYSTONE_IRQ=y > +CONFIG_CRYPTO_DEV_SUN4I_SS=m Why do you enable it as a module? Maxime
On Sat, Aug 1, 2015 at 1:01 AM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > On Fri, Jul 31, 2015 at 10:56:42PM +0800, Chen-Yu Tsai wrote: >> Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and >> sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. >> >> Signed-off-by: Chen-Yu Tsai <wens@csie.org> >> --- >> arch/arm/configs/multi_v7_defconfig | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig >> index 5fd8df6f50ea..5eaf39ce134e 100644 >> --- a/arch/arm/configs/multi_v7_defconfig >> +++ b/arch/arm/configs/multi_v7_defconfig >> @@ -301,6 +301,7 @@ CONFIG_I2C_S3C2410=y >> CONFIG_I2C_SH_MOBILE=y >> CONFIG_I2C_SIRF=y >> CONFIG_I2C_ST=y >> +CONFIG_I2C_SUN6I_P2WI=y >> CONFIG_I2C_TEGRA=y >> CONFIG_I2C_XILINX=y >> CONFIG_I2C_RCAR=y >> @@ -587,6 +588,7 @@ CONFIG_IMX_DMA=y >> CONFIG_MXS_DMA=y >> CONFIG_DMA_OMAP=y >> CONFIG_XILINX_VDMA=y >> +CONFIG_DMA_SUN6I=y >> CONFIG_STAGING=y >> CONFIG_SENSORS_ISL29018=y >> CONFIG_SENSORS_ISL29028=y >> @@ -612,6 +614,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y >> CONFIG_PM_DEVFREQ=y >> CONFIG_ARM_TEGRA_DEVFREQ=m >> CONFIG_MEMORY=y >> +CONFIG_EXTCON=y >> CONFIG_TI_AEMIF=y >> CONFIG_IIO=y >> CONFIG_AT91_ADC=m >> @@ -622,6 +625,7 @@ CONFIG_PWM_ATMEL=m >> CONFIG_PWM_ATMEL_TCB=m >> CONFIG_PWM_RENESAS_TPU=y >> CONFIG_PWM_SAMSUNG=m >> +CONFIG_PWM_SUN4I=y >> CONFIG_PWM_TEGRA=y >> CONFIG_PWM_VT8500=y >> CONFIG_PHY_HIX5HD2_SATA=y >> @@ -660,6 +664,7 @@ CONFIG_LOCKUP_DETECTOR=y >> CONFIG_CRYPTO_DEV_TEGRA_AES=y >> CONFIG_CPUFREQ_DT=y >> CONFIG_KEYSTONE_IRQ=y >> +CONFIG_CRYPTO_DEV_SUN4I_SS=m It seems everything under crypto that is enabled and can be built as a module (i.e. no one selects it as builtin) is enabled as a module. I just followed everything else. Hope this helps. ChenYu
On Fri, Jul 31, 2015 at 10:56:42PM +0800, Chen-Yu Tsai wrote: > Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and > sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. > > Signed-off-by: Chen-Yu Tsai <wens@csie.org> Merged, thanks! Maxime
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 5fd8df6f50ea..5eaf39ce134e 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -301,6 +301,7 @@ CONFIG_I2C_S3C2410=y CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SIRF=y CONFIG_I2C_ST=y +CONFIG_I2C_SUN6I_P2WI=y CONFIG_I2C_TEGRA=y CONFIG_I2C_XILINX=y CONFIG_I2C_RCAR=y @@ -587,6 +588,7 @@ CONFIG_IMX_DMA=y CONFIG_MXS_DMA=y CONFIG_DMA_OMAP=y CONFIG_XILINX_VDMA=y +CONFIG_DMA_SUN6I=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y @@ -612,6 +614,7 @@ CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_PM_DEVFREQ=y CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_MEMORY=y +CONFIG_EXTCON=y CONFIG_TI_AEMIF=y CONFIG_IIO=y CONFIG_AT91_ADC=m @@ -622,6 +625,7 @@ CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_TCB=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_SAMSUNG=m +CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y @@ -660,6 +664,7 @@ CONFIG_LOCKUP_DETECTOR=y CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CPUFREQ_DT=y CONFIG_KEYSTONE_IRQ=y +CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_ARM_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM=m CONFIG_CRYPTO_SHA1_ARM_NEON=m
Enable drivers for Allwinner P2WI, PWM, cryptodev (Security System) and sun6i DMA engine. Also enable EXTCON as PHY_SUN4I_USB depends on it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/configs/multi_v7_defconfig | 5 +++++ 1 file changed, 5 insertions(+)