[v2,1/2] ARM: dts: omap3-devkit8000: add LCD panels

Message ID	1438811229-14174-1-git-send-email-anthoine.bourgeois@gmail.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-omap-owner@kernel.org> From: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> To: linux-omap@vger.kernel.org, Tony Lindgren <tony@atomide.com>, Benoit Cousson <bcousson@baylibre.com>, Anil Kumar <anilk4.v@gmail.com> Cc: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Subject: [PATCH v2 1/2] ARM: dts: omap3-devkit8000: add LCD panels Date: Wed, 5 Aug 2015 23:47:08 +0200 Message-Id: <1438811229-14174-1-git-send-email-anthoine.bourgeois@gmail.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1bdee56..176fc23 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -390,6 +390,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-cm-t3530.dtb \ omap3-cm-t3730.dtb \ omap3-devkit8000.dtb \ + omap3-devkit8000-lcd43.dtb \ + omap3-devkit8000-lcd70.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-gta04a3.dtb \ diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi new file mode 100644 index 0000000..9ca2865 --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -0,0 +1,369 @@ +/* + * Author: Anil Kumar <anilk4.v@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +#include "omap34xx.dtsi" +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "devkit8000::led1"; + gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "devkit8000::led2"; + gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ + default-state = "on"; + linux,default-trigger = "none"; + }; + + usr { + label = "devkit8000::led3"; + gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ + default-state = "on"; + linux,default-trigger = "usr"; + }; + + pmu_stat { + label = "devkit8000::pmu_stat"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "devkit8000"; + + ti,mcbsp = <&mcbsp2>; + ti,audio-routing = + "Ext Spk", "PREDRIVEL", + "Ext Spk", "PREDRIVER", + "MAINMIC", "Main Mic", + "Main Mic", "Mic Bias 1"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + user { + label = "user"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + linux,code = <BTN_EXTRA>; + gpio-key,wakeup; + }; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_dvi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c2>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + tv0: connector@1 { + compatible = "svideo-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + status = "disabled"; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&twl_gpio { + ti,use-leds; + /* + * pulldowns: + * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c6>; +}; + +&twl_keypad { + linux,keymap = <MATRIX_KEY(0, 0, KEY_1) + MATRIX_KEY(1, 0, KEY_2) + MATRIX_KEY(2, 0, KEY_3) + MATRIX_KEY(0, 1, KEY_4) + MATRIX_KEY(1, 1, KEY_5) + MATRIX_KEY(2, 1, KEY_6) + MATRIX_KEY(3, 1, KEY_F5) + MATRIX_KEY(0, 2, KEY_7) + MATRIX_KEY(1, 2, KEY_8) + MATRIX_KEY(2, 2, KEY_9) + MATRIX_KEY(3, 2, KEY_F6) + MATRIX_KEY(0, 3, KEY_F7) + MATRIX_KEY(1, 3, KEY_0) + MATRIX_KEY(2, 3, KEY_F8) + MATRIX_KEY(4, 5, KEY_RESERVED) + MATRIX_KEY(4, 4, KEY_VOLUMEUP) + MATRIX_KEY(5, 5, KEY_VOLUMEDOWN) + >; +}; + +&wdt2 { + status = "disabled"; +}; + +&mcbsp2 { + status = "okay"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "sw"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; + +&gpmc { + ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ + + ethernet@0,0 { + compatible = "davicom,dm9000"; + reg = <6 0x000 2 + 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ + bank-width = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + davicom,no-eeprom; + + gpmc,mux-add-data = <0>; + gpmc,device-width = <1>; + gpmc,wait-pin = <0>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + + gpmc,cs-on-ns = <6>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; + }; +}; + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; +}; + +&vpll1 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + vdds_dsi-supply = <&vpll1>; + vdda_dac-supply = <&vdac>; + + port { + dpi_dvi_out: endpoint@0 { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi new file mode 100644 index 0000000..332766d --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -0,0 +1,38 @@ +/* + * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-devkit8000-common.dtsi" +/ { + aliases { + display0 = &lcd0; + display1 = &dvi0; + display2 = &tv0; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "lcd"; + + enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + }; +}; + +&dss { + port { + dpi_lcd_out: endpoint@1 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts new file mode 100644 index 0000000..d570535 --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -0,0 +1,37 @@ +/* + * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/* + * 4.3'' LCD panel sold with devkit8000 board + */ + +#include "omap3-devkit8000-lcd-common.dtsi" +/ { + model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; + compatible = "timll,omap3-devkit8000", "ti,omap3"; + + lcd0: display@0 { + panel-timing { + clock-frequency = <10164705>; + hactive = <480>; + vactive = <272>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <2>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts new file mode 100644 index 0000000..4afad4b --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -0,0 +1,37 @@ +/* + * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/* + * 7.0'' LCD panel sold with some devkit8000 board + */ + +#include "omap3-devkit8000-lcd-common.dtsi" +/ { + model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; + compatible = "timll,omap3-devkit8000", "ti,omap3"; + + lcd0: display@0 { + panel-timing { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <48>; + vback-porch = <25>; + vfront-porch = <12>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 0f9b4db..40ac894 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -1,5 +1,5 @@ /* - * Author: Anil Kumar <anilk4.v@gmail.com> + * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -7,367 +7,13 @@ */ /dts-v1/; -#include <dt-bindings/input/input.h> - -#include "omap34xx.dtsi" +#include "omap3-devkit8000-common.dtsi" / { model = "TimLL OMAP3 Devkit8000"; compatible = "timll,omap3-devkit8000", "ti,omap3"; - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - leds { - compatible = "gpio-leds"; - - heartbeat { - label = "devkit8000::led1"; - gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "devkit8000::led2"; - gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ - default-state = "on"; - linux,default-trigger = "none"; - }; - - usr { - label = "devkit8000::led3"; - gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ - default-state = "on"; - linux,default-trigger = "usr"; - }; - - pmu_stat { - label = "devkit8000::pmu_stat"; - gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ - }; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "devkit8000"; - - ti,mcbsp = <&mcbsp2>; - ti,audio-routing = - "Ext Spk", "PREDRIVEL", - "Ext Spk", "PREDRIVER", - "MAINMIC", "Main Mic", - "Main Mic", "Mic Bias 1"; - }; - - gpio_keys { - compatible = "gpio-keys"; - - user { - label = "user"; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - linux,code = <BTN_EXTRA>; - gpio-key,wakeup; - }; - }; - - tfp410: encoder@0 { - compatible = "ti,tfp410"; - powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint@0 { - remote-endpoint = <&dpi_dvi_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint@0 { - remote-endpoint = <&dvi_connector_in>; - }; - }; - }; - }; - - dvi0: connector@0 { - compatible = "dvi-connector"; - label = "dvi"; - - digital; - - ddc-i2c-bus = <&i2c2>; - - port { - dvi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - tv0: connector@1 { - compatible = "svideo-connector"; - label = "tv"; - - port { - tv_connector_in: endpoint { - remote-endpoint = <&venc_out>; - }; - }; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { - }; - }; - }; -}; - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - status = "disabled"; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&mmc1 { - vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&twl_gpio { - ti,use-leds; - /* - * pulldowns: - * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) - * BIT(15), BIT(16), BIT(17) - */ - ti,pulldowns = <0x03a1c6>; -}; - -&twl_keypad { - linux,keymap = <MATRIX_KEY(0, 0, KEY_1) - MATRIX_KEY(1, 0, KEY_2) - MATRIX_KEY(2, 0, KEY_3) - MATRIX_KEY(0, 1, KEY_4) - MATRIX_KEY(1, 1, KEY_5) - MATRIX_KEY(2, 1, KEY_6) - MATRIX_KEY(3, 1, KEY_F5) - MATRIX_KEY(0, 2, KEY_7) - MATRIX_KEY(1, 2, KEY_8) - MATRIX_KEY(2, 2, KEY_9) - MATRIX_KEY(3, 2, KEY_F6) - MATRIX_KEY(0, 3, KEY_F7) - MATRIX_KEY(1, 3, KEY_0) - MATRIX_KEY(2, 3, KEY_F8) - MATRIX_KEY(4, 5, KEY_RESERVED) - MATRIX_KEY(4, 4, KEY_VOLUMEUP) - MATRIX_KEY(5, 5, KEY_VOLUMEDOWN) - >; -}; - -&wdt2 { - status = "disabled"; -}; - -&mcbsp2 { - status = "okay"; -}; - -&gpmc { - ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ - - nand@0,0 { - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - nand-bus-width = <16>; - gpmc,device-width = <2>; - ti,nand-ecc-opt = "sw"; - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - x-loader@0 { - label = "X-Loader"; - reg = <0 0x80000>; - }; - - bootloaders@80000 { - label = "U-Boot"; - reg = <0x80000 0x1e0000>; - }; - - bootloaders_env@260000 { - label = "U-Boot Env"; - reg = <0x260000 0x20000>; - }; - - kernel@280000 { - label = "Kernel"; - reg = <0x280000 0x400000>; - }; - - filesystem@680000 { - label = "File System"; - reg = <0x680000 0xf980000>; - }; - }; -}; - -&gpmc { - ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ - - ethernet@0,0 { - compatible = "davicom,dm9000"; - reg = <6 0x000 2 - 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ - bank-width = <2>; - interrupt-parent = <&gpio1>; - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - davicom,no-eeprom; - - gpmc,mux-add-data = <0>; - gpmc,device-width = <1>; - gpmc,wait-pin = <0>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; - - gpmc,cs-on-ns = <6>; - gpmc,cs-rd-off-ns = <180>; - gpmc,cs-wr-off-ns = <180>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <18>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <144>; - gpmc,page-burst-access-ns = <24>; - gpmc,bus-turnaround-ns = <90>; - gpmc,cycle2cycle-delay-ns = <90>; - gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-data-mux-bus-ns = <0>; - gpmc,wr-access-ns = <0>; - }; -}; - -&omap3_pmx_core { - dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ - >; - }; -}; - -&vpll1 { - /* Needed for DSS */ - regulator-name = "vdds_dsi"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; -}; - -&dss { - status = "ok"; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_dpi_pins>; - - vdds_dsi-supply = <&vpll1>; - vdda_dac-supply = <&vdac>; - - port { - dpi_dvi_out: endpoint@0 { - remote-endpoint = <&tfp410_in>; - data-lines = <24>; - }; - }; -}; - -&venc { - status = "ok"; - - vdda-supply = <&vdac>; - - port { - venc_out: endpoint { - remote-endpoint = <&tv_connector_in>; - ti,channels = <2>; - }; + aliases { + display1 = &dvi0; + display2 = &tv0; }; };

[v2,1/2] ARM: dts: omap3-devkit8000: add LCD panels

Commit Message

Comments

Patch